hit counter script

Bosch SP Series User Manual page 53

Hide thumbs Also See for SP Series:
Table of Contents

Advertisement

Fault
Removable streaks are
present on glasses, glass-
ware with a metallic appear-
ance and cutlery.
Irreversible clouding of
glassware.
Rust spots on cutlery.
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Excessive formation of foam
occurs.
Cause
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Glasses are not dishwasher-
proof, only suitable for dish-
washers.
Cutlery is not sufficiently
rust-resistant. Knife blades
are often more severely af-
fected.
Cutlery may also rust if
washed together with rust-
ing items.
Salt content in washing wa-
ter is too high.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
Detergent dispenser was
damp when detergent was
added.
Hand washing-up liquid is
present in dispenser for
rinse aid.
Rinse aid has been spilled.
Detergent or appliance care
product used causes excess-
ive foaming.
Troubleshooting en
Troubleshooting
Only remove large remnants of food
and do not prerinse tableware.
Adjust the sensitivity of the sensors.
Use dishwasher-proof glasses.
Avoid a lengthy steam phase
(standing time after wash cycle
ends).
Use a programme with a lower tem-
perature.
Set the softening system to the wa-
ter hardness.
Use detergent with a glass protec-
tion component.
Use rust-resistant tableware.
Do not wash rusting items.
Remove any spilled special salt
1.
from the tub.
Screw the cap of the special salt
2.
dispenser on tight.
Check that the spray arms are not
blocked and can rotate freely.
Only add detergent to a detergent
dispenser when dry.
Immediately add rinse aid to the
dispenser.
→ "Adding rinse aid", Page 32
Remove the rinse aid with a cloth.
Change the brand of detergent.
53

Advertisement

Table of Contents
loading

Table of Contents