Table of Contents
Advertisement
Renaming a channel list:
Creating an Auto Set list
Adding and removing all
channels
32
Setting favorites and filters
To help you decide whether to include or exclude a certain channel, the title of
the program currently airing on that channel appears at the top of the screen.
7. Scroll up or down to view channels and descriptions. Press
channels to your list.
8. When you have added all of the channels you want to your list, use the
navigation buttons to highlight and
Once you have created your lists, Use the remote control
cycle through them quickly and easily. Each press cycles to next channel list.
You can also select a list by highlighting the
1. Highlight the Rename button and press
A
pop-up menu appears. You can rename the first three lists.
Rename List
You cannot rename the All and Family lists.
2. Highlight the list you wish to rename and press
pop-up panel appears.
3. Highlight the desired letter using the navigation buttons.
4. Press
to enter the letter.
SELECT
5. When finished, Select OK.
1.
SELECT
the Auto Set button. A pop-up menu appears showing each of the
channel lists.
2. Highlight and
SELECT
Once selected, the
Auto Set Progress
take several minutes for the receiver to scan through all of the channels and
determine which ones you are authorized to receive. The results of this scan
will be stored in the designated channel list.
Note: Auto Set may exclude some channels such as the Music Choice
channels or include some pay per view channels. This does not mean that
the receiver is faulty. These channels were excluded or included due to the
DIRECTV Receiver's analysis process. You can manually edit the lists to
correct these oversights.
Selecting the Del All menu button clears all channels from the list you have
chosen. Add All has the opposite effect, creating a list of all the channels you are
authorized to receive.
SELECT
the
Fav List
SELECT
SELECT
a channel list to be programmed.
pop-up status panel appears. It may
to add
SELECT
Exit
tab to resume viewing.
button to
FAVORITE
tab.
.
. A buttonboard
- Quick Links:
- Programming the Remote Control
- Control Codes
Hide quick links:
Advertisement
Table of Contents
