Table of Contents
Advertisement
To schedule or edit an
You can schedule events up to
eleven months in advance.
Select Delete Event to clear a
scheduled event.
If you specify a date, use the
month/day format. The year is set
automatically.
Adjusting audio
20
Using the menus
The
Schedule
If more than seven events are already scheduled, use the navigation buttons to
event
scroll down to view the additional events. Small arrows at the top or bottom of
the list indicate that there are additional events.
To schedule a program:
1. Highlight an upcoming program in the program guide and press
Press
SELECT
If you choose a scheduling option, the DIRECTV Receiver will turn on (if
necessary) and tune to the specified channel at the chosen date and time.
2. If you chose Schedule to Tape (SAT-A65 only) and you have set up your
VCR (see page 7), the DIRECTV Receiver will record the event. For
unattended recording:
– Attach the VCR Control Cable and set up your VCR.
– Set your VCR for the correct DIRECTV Receiver output: RF (channel
3/4) or A/V (phono or S-Video).
– Insert a blank videotape and leave the VCR turned on.
3. Use the navigation buttons to specify AM or PM (or N for noon, or M for
midnight if the you specified12:00).
4. Use the same procedure to set the program Length in hours and minutes.
5. Use the navigation buttons to advance to the Frequency column.
6. Specify when, or how often, the event occurs: Today, Tomorrow, Every Mon,
Every Tue, Every Wed, Every Thu, Every Fri, Every Sat, Every Sun,
Everyday, Mon-Fri, or "/" (specify a date).
7. After setting the Frequency, use the navigation buttons to advance.
8. Review your settings and choose OK, or choose Cancel to delete the edits.
To cancel a program scheduled for viewing or taping:
Find the upcoming program in the program guide you wish to cancel and press
until the check mark ( ) or videotape icon (
SELECT
If the program is currently airing, you must delete the event from the
menu pane accessed from the
From the
MAIN MENU
From the
AUDIO ADJUST
• Default Audio and Alternate Audio
• Audio Left/Right Balance
• TruSurround
• Dolby Digital Output (SAT-A65 only)
• Output Optimization
pane displays up to seven previously scheduled events at a time.
again to cycle through the next available option.
menu.
TIMER
, highlight and
SELECT
menu pane, you can change:
®
Audio Processing (SAT-A65 only)
SELECT
) disappears.
Schedule
the
tab.
Audio & Video
.
- Quick Links:
- Programming the Remote Control
- Control Codes
Hide quick links:
Advertisement
Table of Contents
