Adjusting The Carriage Speed; Checking The Nozzle Check Pattern; Adjustment - Brother GTX-4 Service Manual

Hide thumbs Also See for GTX-4:

Table of Contents

Adjusting the carriage speed

Perform the operation while the printer is in Standby mode.

-> [Printer Setting] -> [CR Speed Adjustment] ->

[Start (after cleaning/setup)] ->

2) When the printer stops with a sound and the printer returns

to Standby mode, the operation is completed.

1) Make sure that the platen height adjustment lever (a) is set

(It takes about 3

at the "A" position.

Use a platen sized 14 in. x 16 in. (356 mm x 406

mm), which is included at the time of your