Before You Use Your Receiver - Sony STR-DE475 Operating Instructions Manual
Hide thumbs
Also See for STR-DE475:
- Operating instructions manual (206 pages) ,
- Service manual (40 pages) ,
- Dimensions (1 page)
Table of Contents
Advertisement
Notes
• The front balance, surround balance, center level, and surround
level are shown in the display during adjustment.
• Although these adjustments can also be made via the front
panel using the LEVEL menu (when the test tone is output, the
receiver switches to the LEVEL menu automatically), we
recommend you follow the procedure previously described in
this section and adjust the speaker levels from your listening
position using the remote control.
z
When setting the volume levels for each speaker
Let's assume that you have matched the sound levels of all the
speakers using the test tone. Although this lays the foundation
for high quality surround sound, it may be necessary to make
further adjustments while listening to playback of actual
software. This is because most software contains center and
surround channels recorded at slightly lower levels than the two
front channels.
When you actually play back software recorded in multi channel
surround, you will notice that increasing the center and surround
speaker levels produces a better blend between the front and
center speakers and greater cohesion between the front and
surround speakers. Increasing the level of the center speaker
about 1 dB, and the surround speakers about 1~2 dB is likely to
produce better results.
In other words, in order to create a more cohesive soundstage
with balanced dialog, we recommend that you make some
adjustments while playing your software. Changes of only 1 dB
can make a huge difference in the character of the soundstage.
Before You Use Your
Receiver
Checking the connections
After connecting all of your components to the r
do the following to verify that the connections wer
cor rectly .
?/1
MULTI CHANNEL DECODING
? / 1
DISPLAY
SET UP
DIMMER
PRESET
–
+
–
+
TUNING
TUNING
MENU
MEMORY
SHIFT
FM MODE
FM
AM
PHONES
1
Press ?/1 to turn on the receiver.
2
Press a function button to select a component
(program source) that you connected (e.g., CD
player or tape deck).
3
Turn on the component and start playing it.
4
Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
per for ming this pr ocedur e, look for the r
following checklist and take the appr
cor rect the pr oblem.
There is no sound no matter which component is
selected.
, Check that both the r
eceiver and all components
are tur ned on.
, Check that the volume level on the display is not
set to VOL MIN by turning the MASTER
VOLUME.
, Check that all speaker cor
cor rectly .
, Press MUTING if MUTING appears on the display
, Check that the headphones ar
the PHONES jack. No sound will come fr
speakers if the headphones ar
, Check that the r
eceiver is not in "Demonstration
Mode" (see page 14).
eceiver ,
e made
Function buttons
VIDEO
DVD/LD
TV/SAT
MD/TAPE
CD
TUNER
MULTI CH IN INPUT MODE
MASTER VOLUME
+
NAME
–
TREBLE
+
–
LEVEL
SOUND CONTROL
SURR
SOUND FIELD
–
BASS
+
A.F.D.
MODE
2CH
MUTING
ENTER
MASTER VOLUME
eason in the
opriate measur
es to
ds ar e connected
.
e not connected to
om the
e connected.
19
GB
Hide quick links:
Advertisement
Table of Contents
