Advertisement
Table of
Notes on
Warning
2, 4
• When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital,
Playing in Random Order
DVD disp
Selecting a Language
Selecting the Camera Angle
Selecting the Picture Enhancement (E.P.M.*)
Playing Repeatedly
About the illustrations of the battery compartment
TOP MENU
1
Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from the on-
There are two types of battery compartment in the
PAUSE/STEP
screen displays
SKIP
38 40
supplied remote controls. (This does not mean a
You can play titles, chapters within a title, or tracks in random order.
If the scene was recorded from multiple angles, you can easily change
You can select a preferred language and sound recording system from those
You can play a specific title, chapter, track, or segment repeatedly.
You can easily select a preferred picture enhancement.
PLAY
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog
difference in performance between the two.)
PLAY
7. Do not block any ventilation openings. Install in accordance with the
18. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in
(Random playback)
included on the DVD video disc.
(Title repeat, chapter/track repeat, A-B repeat)
the camera angle of the scene you are watching.
STOP
stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG
Refer to either illustration depending on the actual
so may cause serious personal injury.
manufacturer' s instructions.
each pole shall be incorporated in the electrical installation of the building.
/
*E.P.M.: Enhanced Picture Mode
Open the cov
remote control.
AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital
MENU
ENTER
Surround™
playback, an external 5.1 channel DTS Digital Surround™
ENTER
Introduction
CLEAR
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
Loading batteries
On handling discs
/
BITSTREAM/PCM AUDIO OUT jack of the DVD video player.
electric shock do not perform any servicing other than that contained in the operating
SAFETY PRECAUTIONS .......................... 2
Good morning!
T
instructions unless you are qualified to do so.
Do not touch the playback side of the disc.
TOP MENU
IMPORTANT SAFETY INSTRUCTIONS ... 4
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connecting to an audio system and TV equipped with component video inputs
Number buttons
1
Precautions ............................................... 8
19. Do not place a heavy object on or step on the apparatus. The object may fall,
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video
MPEG2 sound
8. Do not install near any heat sources such as radiators, heat registers, stoves,
causing serious personal injury and serious damage to the apparatus.
Notes on Discs .......................................... 9
DVD
player.
DVD
DVD
DVD
Playing titles, chapters or tracks in random order
Changing the camera angle
Selecting the picture enhancement
Repeating a title, chapter, or track
Locating a specific chapter or track directly
Playing in slow-motion
Selecting a playback audio setting
DVD
DVD
You can enjoy motion picture and live concert DVD video discs with dynamic
VCD
VCD
DVD
or other apparatus (including amplifiers) that produce heat.
VCD
VCD
VCD
VCD
Notes on region numbers ............................... 10
CD
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder
CD
CD
CD
Signal flow
or MPEG2 audio processor.
Model No.
Table of Contents.................................... 11
To pause playback (still mode)
1
Press RANDOM.
DVD
1
1
1
1
1
Press ANGLE while playing a scene
Press SLOW during playback.
Press AUDIO during playback.
Press E.P.M.
Press T.
Press REPEAT.
Identification of Controls ....................... 12
Press PAUSE/STEP during playback.
Retain this information for future reference.
recorded with multiple angles.
Play mode indicator
RANDOM
Each time you press the RANDOM
Front panel ..................................................... 12
E.P.M.
SLOW
If you are using a VIDEO CD/audio CD, skip steps 1
AUDIO
Each time you press the SLOW
Each time you press the REPEAT
The picture enhancement menu
The current audio setting is
Insert batterie
REPEAT
To resume normal playback, press
PAUSE/STEP
VCD
and 2. Then at step 3, enter the number for the track
button, the random playback mode
ANGLE
button, the slow-motion speed
displayed.
appears.
button, the repeat mode changes as
Rear panel ...................................................... 12
While playing a scene recorded with
the PLAY button.
you want using the number buttons.
changes as follows.
Do not attach paper or tape to discs.
changes.
follows.
multiple angles, the angle icon (
DVD display .................................................... 13
20. Do not use a cracked, deformed, or repaired disc. These discs are easily
• The sound is muted during still
flashes in the DVD display.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
broken and may cause serious personal injury and apparatus malfunction.
Remote control ............................................... 14
e.g.
SEARCH
2
3
Location of the required label
Press the ANGLE button while the
polarized plug has two blades with one wider than the other. A grounding
Loading batteries ............................................ 15
T
angle icon is flashing.
type plug has two blades and a third grounding prong. The wide blade or the
2
Operating with the remote control .................. 15
To stop playback
third prong are provided for your safety. If the provided plug does not fit into
e.g.
Press STOP.
your outlet, consult an electrician for replacement of the obsolete outlet.
Chapter Repeat
2
DVD
Connections
DVD
Press
to highlight the space of
Resuming playback from the same location
Chapter Random
DVD
VCD
To ANALOG AUDIO OUT
STOP
" C (Chapter)."
CD
Connecting to a TV ................................. 16
On cleaning discs
Connecting to an amplifier equipped with a digital audio input
Title Repeat
DVD
Connecting to a TV ......................................... 16
PRODUCT IS CERTIFIED BY THE MANUFACTURER TO
1
Press STOP at the location where you
Connecting to an audio system and TV
Title Random
COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J
DVD
VCD
Track Repeat
Fingerprints and dust on the disc cause picture and
The abbreviation of the language appears instead
2 channel digital stereo
To remove the disc
CD
want to interrupt playback.
ENTER
APPLICABLE AT THE DATE OF MANUFACTURE.
equipped with component video inputs ........ 17
sound deterioration. Wipe the disc from the center
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
of the language name. Refer to the list of
Press OPEN/CLOSE.
To audio inputs of
amplifier equipped with a digital audio input and speaker system (right and left front
MANUFACTURED
STOP
The DVD video player memorizes
Connecting to Optional Equipment ...... 18
outwards with a soft cloth. Always keep the disc
languages and their abbreviations.
VCD
DVD
Track Random
the amplifier
10. Protect the power cord from being walked on or pinched particularly at plugs,
All Repeat
speakers).
CD
VCD
the location where playback is
clean.
Remove the disc after the disc tray
Connecting to an amplifier equipped with a
CD
convenience receptacles, and the point where they exit from the apparatus.
stopped.
opens completely.
Dolby Digital decoder ................................... 18
2
OPEN/CLOSE
3
Press ANGLE or
DVD/VIDEO CD/CD indicator
Enter the number for the chapter or
Selecting sound channels of VIDEO CDs
Connecting to an amplifier equipped with
Repeat Off
number is displayed on the TV screen.
1-1,SHIBAURA 1-CHOME,MINATO-KU.
track you want, using
You can switch left and right channels by pressing the
2
Make sure to match the + and – on the batteries
Press PLAY.
Dolby Pro Logic Surround ............................ 18
TOKYO 105-8001,JAPAN
number buttons.
AUDIO button repeatedly during playback.
Random Off
Each time you press the ANGLE
ANGLE
to the marks inside the battery compartment.
Connecting to an amplifier equipped with a
The DVD video player resumes
PLAY
2
Select the picture enhancement by
To OPTICAL
button, the camera angle changes.
When you use the number buttons, you can use
DTS decoder ................................................ 18
playback from the location where
type digital
pressing E.P.M. or
DVD
the +10 button to select numbers from 10 through
3
Close the cover.
Repeating a specific segment
audio input
you stopped playback.
Connecting to an amplifier equipped with an
If you press the RANDOM button
VCD
When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches
99.
CD
MPEG2 audio decoder ................................. 19
during playback, the DVD video
If you cannot wipe off the dust with a soft cloth, wipe
them to the title/chapter/track number indicators. Some discs may not permit this operation.
11. Only use attachments/accessories specified by the manufacturer.
Each time you press the button, the picture
You can change the camera angle
e.g. To select chapter or track 25
player automatically starts random
Connecting to an amplifier equipped with a
ENTER
the disc lightly with a slightly moistened soft cloth and
enhancement changes.
directly by pressing the number
1
Press A-B RPT at the beginning of the
playback after finishing the current
digital audio input ......................................... 19
finish with a dry cloth.
2
buttons corresponding to its angle
Component video (ColorStream
title, chapter or track.
segment (point A) you want to play
Be sure to press the OPEN/CLOSE button to close
Do not use any type of solvent such as thinner,
The indicators vary depending on the kinds of discs you play.
number instead of using the
Some TVs or monitors are equipped with component video inputs. Connecting to
Basic playback
Notes on batteries
repeatedly.
the disc tray after you remove the disc.
benzine, commercially available cleaners or antistatic
or
+10
Output sound conversion table (sampling frequency/quantization bit)
buttons.
Press DISPLAY again.
these inputs allows you to enjoy higher quality picture playback.
Improper use of batteries may cause battery leakage and
2
Normal:
Press PLAY.
spray for vinyl LPs. It may damage the disc.
Playing a Disc ......................................... 20
Actual labels for component video inputs may vary depending on the TV
A-B RPT
corrosion. To operate the remote control correctly, follow the
Standard black level (7.5 IRE).
DVD video disc
The DVD video player starts random
Basic playback ................................................ 20
PLAY
manufacturer. (ex. Y, R-Y, B-Y or Y, C
instructions below.
Recording system
Discs
playback.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
• Do not insert batteries into the remote control in the wrong
In some TVs or monitors, the color levels of the playback picture may be reduced
On storing discs
Playing in fast reverse or fast forward
DVD
Locating a specific chapter or track
Press the PLAY button within about
Enhanced Black Level:
manufacturer, or sold with the apparatus. When a cart is used, use caution
direction.
VCD
slightly or the tint may change. In such a case, adjust the TV or monitor for
directions ...................................................... 22
CD
5 seconds after you press the
• During playback:
Enhanced Black Level (0 IRE).
when moving the cart/apparatus combination to avoid injury from tip-over.
• Do not charge, heat, open, or short-circuit the batteries.
optimum performance.
Playing frame by frame ................................... 22
0 : 0 8 : 1 6
Do not store discs in a place subject to direct sunlight
2
3
RANDOM button.
Do not throw batteries into a fire.
Example
Playing in slow-motion .................................... 23
or near heat sources.
2
• Do not leave dead or exhausted batteries in the remote
Press A-B RPT again at the end of the
Press SKIP
Notes
Do not store discs in places subject to moisture and
Movie 1:
Resuming playback from the same location ... 23
TITLE
control.
DVD video
segment (point B).
the chapter or track number you want.
Linear PCM
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital
DVD
dust such as a bathroom or near a humidifier.
Brightness levels raised for
discs
• Do not use different types of batteries together, or mix old
Locating a Specific Title, Chapter, or
Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM
Playback starts from the selected chapter or track.
Store discs vertically in a case. Stacking or placing
enhanced picture clarity.
The DVD video player automatically
and new batteries.
A-B RPT
Track ........................................................ 24
AUDIO OUT jack of the DVD video player.
returns to point A and starts repeat
objects on discs outside of their case may cause
• If you do not use the remote control for a long period of
SKIP
Notes
Playing chapter 3 of title 2
To locate succeeding chapters or tracks
Movie 2:
• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "OPTICAL" or "COAXIAL" input of a
Locating a title using the top menu ................. 24
playback of the selected segment
warping.
time, remove the batteries to avoid possible damage from
Notes
• Refer to the owner' s manual of the connected equipment as well.
For deeper, richer color
Receiver or Processor.
Locating a title by entering the title number .... 24
(A-B).
battery corrosion.
• Do not move the DVD video player during playback. Doing so may damage the disc.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
VIDEO CDs
• Refer to the owner' s manual of the connected equipment as well.
reproduction.
SKIP
Locating a specific chapter or track directly .... 25
Playback starts from the beginning of
• If the remote control does not function correctly or if the
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
from the wall outlet before making any connections.
Linear PCM 44.1 kHz/16 bit
Some discs may not display chapter
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
Audio CDs
the current chapter or track.
operating range becomes reduced, replace all batteries
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
cause the DVD video player to malfunction.
Locating a specific chapter or track ................ 25
Animation:
numbers or elapsed time.
from the wall outlet before making any connections.
with new ones.
When you press twice, playback starts
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video
DVD video player away from the tuner and radio.
For enhanced color contrast.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver' s volume to a moderate
• If battery leakage occurs, wipe the battery liquid from the
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver' s volume to a moderate
player to malfunction.
from the beginning of the preceding
To turn off the on-screen display, press
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
battery compartment, then insert new batteries.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
chapter or track.
DISPLAY again.
• Turn off the amplifier before you connect or disconnect the DVD video player' s power cord. If you leave the amplifier power
• Turn off the amplifier before you connect or disconnect the DVD video player' s power cord. If you leave the amplifier power
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
on, the speakers may be damaged.
STOP button on your remote control once the movie is completed.
on, the speakers may be damaged.
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
. Otherwise, high volume sound may damage your hearing as well as the speakers.
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD video player, you should generally
/
/
reduce the sharpness adjustment on your TV when viewing DVD video discs.
About
DVD
The
DVD
VCD
function described under that heading.
¡Buenos días!
Bonjour!
: You can use this function with DVD video discs.
DVD
: You can use this function with VIDEO CDs.
VCD
: You can use this function with audio CDs.
CD
Total playing time indicator
Amplifier equipped with an
VIDEO OUT
AUDIO OUT
Playback side
TITLE
VIDEO
Y
P
P
B
R
MPEG2 audio decoder
Title number indicator
To OPTICAL
To COAXIAL
e.g.
type digital
R
L
COAXIAL OPTICAL
type digital
S
ANALOG
BITSTREAM/PCM
:
:
audio input
mode.
audio input
Chapter Repeat
–
– –
– –
1
1
Chapter Random
ENG1 PCM 2CH
(red)
(white)
ENG2
D 2CH
Repeats the current
To P
Plays the chapters
chapter.
VIDEO
within the current title
1
OUT
in random order.
Repeats the current
e.g.
2
title.
:
:
–
– –
– –
1
1
Plays the titles in
Repeats the current
3
random order.
track.
Multifunctional indicator (indicates operating status or
46
Plays the tracks in
Repeats the entire
messages, etc.)
random order.
disc.
(red)
(white)
/
while the angle
Resumes normal
Amplifier equipped with
/
or the
a digital audio input
playback.
Resumes normal
playback.
To COAXIAL
type digital
/ .
audio input
Audio system
5
®
) outputs/inputs
5
+10
, C
)
B
R
AÐ
BITSTREAM/PCM
jack
Dolby Digital
• During playback:
Bitstream
9.6
48 kHz/16 bit
48 kHz/16 bit
Example
48 kHz/20 bit
48 kHz/16 bit
or
repeatedly to display
CHP
48 kHz/24 bit
48 kHz/16 bit
96 kHz/16 bit
48 kHz/16 bit
VCD
96 kHz/20 bit
48 kHz/16 bit
96 kHz/24 bit
48 kHz/16 bit
DTS
Bitstream
MPEG1, MPEG2
Bitstream
44.1 kHz/16 bit 44.1 kHz/16 bit
MPEG1
44.1 kHz/16 bit
Some discs may not display track
Bitstream
DTS
numbers or elapsed time.
AÐ B
OFF
Pressing
control c
decoder system must be connected to the
VCD
CD
Advanced playback
Structure of disc contents
Operating with the remote control
icons on the heading bar show the playable discs for the
CD
Accessing a Specific Location Directly ...
Entering the time counter of the desired
Normally, DVD video discs are divided into titles, and
FL DIM
location ......................................................... 26
Point the remote control at the remote
the titles are sub-divided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
sensor and press the buttons.
Playing Repeatedly ................................. 27
Repeating a title, chapter, or track .................. 27
DVD video disc
Repeating a specific segment ........................ 27
Serial No.
To resume normal playback
To resume normal playback
To exit the picture enhancement selection
About the screen saver
To turn off the angle number display
Playing in a Favorite Order .................... 28
Title 1
2
2
4
Press AUDIO or
Press PLAY.
Press PLAY.
Chapter number indicator
Press CLEAR.
If you pause a picture of a DVD video disc and leave it
Press PLAY.
Press ENTER.
Press CLEAR.
Setting titles, chapters, or tracks in a favorite
Chapter 1
Chapter 2
setting is displayed on the TV screen.
still for a long while, the screen saver of the DVD video
PLAY
order ............................................................. 28
PLAY
CLEAR
TOTAL
CHP
PLAY
AUDIO OUT
CLEAR
VIDEO OUT
Memory playback indicator
VIDEO
Y
P
P
B
R
player automatically appears (when "Screen Saver" is
AUDIO
*
Playing in Random Order ....................... 29
: Title number (Track number)
)
set to "On"
43
R
L
COAXIAL OPTICAL
Track number
Locate a title or track using the number buttons.
S
ANALOG
ENTER
BITSTREAM/PCM
Playing titles, chapters or tracks in random
Within about 7 m (23 feet)
PLAY button.
indicator
order ............................................................. 29
To select a title and chapter number at the same
Connect either.
*
Notes
Note
: Chapter number
75
coaxial cable
time
Zooming a Picture .................................. 30
VIDEO CD/audio CD
• Some discs may not permit random playback operation.
Locate a chapter using the number buttons.
The sound is muted during slow-motion playback.
Notes
Automatic Power Off function
• You cannot use the random playback function in conjunction
Optical digital cable
• You can change the camera angle during still playback. The
Perform step 1, and enter a title number you want in the
Zooming a picture ........................................... 30
If the DVD video player is stopped, or the screen saver
ENTER
: To stop playback.
with the memory playback function.
camera angle changes to the new setting when you resume
space of "T (Title)" using the number buttons or the
is engaged for approximately 20 minutes, the DVD
Selecting the Picture Enhancement
To resume normal playback
To P
To Y
R
B
normal playback.
Track 1
buttons then perform steps 2 to 4.
Note
video player will automatically turn itself off.
VIDEO
(E.P.M.) ..................................................... 31
VIDEO
Press CLEAR.
• If you pause a picture immediately after changing a camera
Actual effect to picture may vary depending on the TV. Make
Distance: About 7 m (23 feet) from the front of the
OUT
OUT
: Playback starts from the beginning of the
Selecting the picture enhancement ................ 31
angle, the resumed playback picture may not display the new
selection according to your preference.
Note
CLEAR
remote sensor
current chapter or track.
To start playback from the beginning regardless
camera angle.
Pressing the CLEAR button resets the title and chapter
Selecting the Sound Enhancement
Angle:
About 30 in each direction of the front of
of the location where you stopped playback
numbers. To clear the "T (Title)" and "C (Chapter)" display,
To turn off the audio setting display, press the
(E.A.M.) .................................................... 32
: Fast reverse playback
the remote sensor
1 Press STOP twice.
press the T button several times.
Each title, chapter or track is assigned a number, which
CLEAR button.
Selecting the sound enhancement ................. 32
Note
is called "title number", "chapter number" or "track
* Do not expose the remote sensor of the DVD video
STOP
Selecting the Camera Angle .................. 33
Some discs may not permit repeat operation.
: To start playback.
number" respectively.
player to a strong light source such as direct
To Y video input
Changing the camera angle ........................... 33
There may be discs that do not have these numbers.
sunlight or other illumination. If you do so, you may
Notes
Selecting Subtitles ................................. 34
not be able to operate the DVD video player via the
2 Press PLAY.
• When you turn on the DVD video player or replace a disc,
: Fast forward playback
VIDEO OUT
AUDIO OUT
To P
VIDEO
Y
P
P
B
R
remote control.
player returns to the initial default setting
Selecting a subtitle language ......................... 34
Notes on copyright
PLAY
If you select a sound track which is not included on the disc,
R
L
COAXIAL OPTICAL
S
ANALOG
BITSTREAM/PCM
Selecting a Language ............................. 35
To P
the DVD video player plays a prior sound track programmed
: To locate succeeding chapters or tracks.
Connect either.
It is forbidden by law to copy, broadcast, show,
Selecting a playback audio setting ................. 35
on the disc.
Notes on the remote control
broadcast on cable, play in public, and rent copyrighted
75
coaxial cable
• Some discs allow you to change audio selections only via
On-screen Display Operation ................ 36
• Direct the remote control at the remote sensor of the DVD
material without permission.
: To begin slow motion playback.
the disc menu. If this is the case, press the MENU button
video player.
Optical digital cable
On-screen display operation .......................... 36
To resume normal playback
• If you want to return to the beginning of a DVD video
and choose the appropriate language from the selections on
• Do not drop or give the remote control a shock.
disc, open and close the disc tray once with the
DVD video discs are copy protected, and any recordings
Press CLEAR.
the disc menu.
• Do not leave the remote control near an extremely hot or
Function setup
: To pause playback.
OPEN/CLOSE button before pressing the PLAY
made from these discs will be distorted.
humid place.
/
CLEAR
button.
• Do not spill water or put anything wet on the remote
Customizing the Function Settings ...... 38
This product incorporates copyright protection
control.
Setting procedure ........................................... 38
: To turn off the display.
Audio selection from the menu
VIDEO CD
Notes
• Do not open the remote control.
technology that is protected by method claims of certain
Setting details ................................................. 40
"Bitstream"
"Analog 2ch"
• The DVD video player' s memory is also cleared when:
U.S. patents and other intellectual property rights owned
Notes
ANALOG AUDIO
BITSTREAM/PCM
– you change the parental lock setting
by Macrovision Corporation and other rights owners.
• Some discs may not permit A-B repeat operation.
OUT jacks
jack
Others
menu language
• You cannot set the A-B repeat function for a segment that
The on-screen display will vary depending on the disc.
Use of this copyright protection technology must be
Bitstream
48 kHz/20 bit
– you open the disc tray.
includes multiple camera angles
authorized by Macrovision Corporation, and is intended
Table of Languages ................................ 46
48 kHz/16 bit
48 kHz/16 bit
Notes
• There may be a difference in the location where playback
• You can specify a segment only within the current title or
: Data transfer rate (Mbit/s)
for home and other limited viewing uses only unless
48 kHz/20 bit
48 kHz/16 bit
DVD
Before Calling Service Personnel ......... 47
• Some titles may not display chapter numbers.
resumes depending on the disc.
track (VIDEO CD).
= Amount of picture, sound and subtitle data in the
otherwise authorized by Macrovision Corporation.
48 kHz/24 bit
48 kHz/16 bit
TRK
• If you press and hold the SKIP
• Settings you changed using the on-screen displays while the
DVD video disc transferred per second.
• There may be a slight difference between point A and the
Specifications ......................................... 48
48 kHz/16 bit
Reverse engineering or disassembly is prohibited.
DVD video player keeps a location in the memory may
panel during playback, the DVD video player performs fast
The larger the value is, the more data processed,
location where playback actually resumes depending on the
48 kHz/20 bit
LIMITED WARRANTY DVD VIDEO
function only after the memory is cleared.
reverse or fast forward playback. You can vary the speed by
but this does not necessarily insure better picture
48 kHz/24 bit
disc.
PLAYER ................................................... 49
Playing track 6
pressing the button repeatedly.
quality.
Bitstream
To locate chapters or tracks during fast reverse or fast
48 kHz/16 bit
Bitstream
: CD-Text
forward playback, first press the PLAY button to resume
CD
44.1 kHz/16 bit
Displays CD-Text data if included on the audio
44.1 kHz/16 bit
normal playback, then use the SKIP
44.1 kHz/16 bit
CDs. (Some letters may not be displayed properly
• When you set "Title Stop" to "Off"
(Noise)
Bitstream
depending on the disc.)
chapters in another title. If you go back to the preceding title
by pressing the SKIP
: The on-screen display turns off.
VCD
locates the first chapter of the title. When "Title Stop" is set
to "On," you can access chapters only within the current title.
2
PLAY
2
2
2
ENTER
1, 2
1, 2
CLEAR
CLEAR
1, 2
CLEAR
CLEAR
REPEAT
Dimmed
Normal
1
A-B RPT
DVD video disc
Title 2
/
while the audio
• Use DVD video discs encoded via
Chapter 1
Chapter 2
the MPEG2 recording system.
Playback starts from the selected
The DVD video player starts repeat
AC IN
A - B
M
R
• Make the following setting.
chapter or track.
playback.
Alternatively leave the DVD video
Each time you press the AUDIO
30
30
Press the PLAY button within about
). To turn off the screen saver, press the
button, the audio settings included
player unattended for about 5
On-screen display
5 seconds after you press the
seconds after having made a
on the DVD video disc change.
Random playback indicator
REPEAT button.
selection.
"Audio Out Select"
Recording system
VIDEO CD/audio CD
21
If you press the
/
Track 2
Track 3
Track 4
can select output sound format.
25
22
The DVD video player ' s memory is
20
cleared.
Angle icon indicator
Repeat playback indicator
22
video input
B
• Make the following setting.
42
Playback starts from the
DVD
beginning of the current title.
On-screen display
video input
R
Playback starts from the
VCD
"Audio Out Select"
CD
TV or monitor with
beginning of the disc.
component video inputs
21
• Make the following setting.
On-screen display
38
40
and output jacks on the rear panel
Audio CD
"Audio Out Select"
"Analog 2ch"
ANALOG AUDIO
BITSTREAM/PCM
43
OUT jacks
jack
.
41
48 kHz/20 bit
• During playback:
48 kHz/16 bit 48 kHz/20 bit
.
33
48 kHz/16 bit
48 kHz/16 bit
Example
48 kHz/20 bit
48 kHz/16 bit
48 kHz/24 bit
48 kHz/16 bit
or
96 kHz/16 bit
48 kHz/16 bit
S3125A
CD
96 kHz/20 bit
48 kHz/16 bit
96 kHz/24 bit
48 kHz/16 bit
Playing track 6
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
or
, you can access
(Noise)
Bitstream
45
: 3D (N-2-2) sound enhancement can function.
button, the DVD video player
26
Off
Chapter 3
24
Select:
Page
38
"Bitstream"
40
25
To wall outlet
MPEG
35
/
buttons, you
Track 5
40
.
Select:
Page
25
38
"PCM"
40
23
Select:
Page
38
"PCM"
40
ANALOG AUDIO
or select a disc
OUT jacks
48 kHz/16 bit
48 kHz/20 bit
TRK
48 kHz/24 bit
button on the front
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
1
44.1 kHz/16 bit
button.
(Noise)
35
33
31
29
27
25
21
17
37
23
3
Advertisement
