Advertisement
Table of
Notes on
7. Do not bloc
18. Keep your f
Warning
so may cause s
manufacturer
Introduction
On handlin
2, 4
• When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital,
Playing in Random Order
Selecting the Camera Angle
DVD disp
Playing Repeatedly
Selecting the Picture Enhancement (E.P.M.*)
Selecting a Language
About the illustrations of the battery compartment
TOP MENU
1
Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set "Audio Out Select" to "PCM" from the on-
There are two types of battery compartment in the
PAUSE/STEP
screen displays
SKIP
38 40
supplied remote controls. (This does not mean a
SAFETY PRE
You can play titles, chapters within a title, or tracks in random order.
If the scene was recorded from multiple angles, you can easily change
You can play a specific title, chapter, track, or segment repeatedly.
You can easily select a preferred picture enhancement.
You can select a preferred language and sound recording system from those
PLAY
• When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog
difference in performance between the two.)
PLAY
(Random playback)
(Title repeat, chapter/track repeat, A-B repeat)
the camera angle of the scene you are watching.
included on the DVD video disc.
IMPORTANT
STOP
stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG
Refer to either illustration depending on the actual
's instructions.
/
Do not touch th
*E.P.M.: Enhanced Picture Mode
Open the cov
remote control.
AUDIO OUT (L/R) jacks of the DVD video player are connected to an amplification system. To enjoy DTS Digital
MENU
Precautions ..
ENTER
Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the
ENTER
19. Do not plac
Notes on Disc
CLEAR
Loading batteries
/
BITSTREAM/PCM AUDIO OUT jack of the DVD video player.
causing serious
Good morning!
Notes on regio
T
Table of Cont
TOP MENU
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connecting to an audio system and TV equipped with component video inputs
Number buttons
1
Identification
MPEG2 sound
8. Do not install near any heat sources such as radiators, heat registers, stoves,
Play mode ind
DVD
DVD
DVD
Front panel ....
DVD
Playing titles, chapters or tracks in random order
Selecting a playback audio setting
Changing the camera angle
Selecting the picture enhancement
Repeating a title, chapter, or track
Playing in slow-motion
Locating a specific chapter or track directly
DVD
DVD
You can enjoy motion picture and live concert DVD video discs with dynamic
VCD
VCD
DVD
or other apparatus (including amplifiers) that produce heat.
VCD
VCD
VCD
VCD
CD
Rear panel ......
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder
CD
CD
CD
Signal flow
or MPEG2 audio processor.
Do not attach pa
DVD display ..
20. Do not use a
To pause playback (still mode)
broken and ma
1
Remote contro
Press RANDOM.
DVD
1
1
1
1
1
Press ANGLE while playing a scene
Press SLOW during playback.
Press REPEAT.
Press T.
Press E.P.M.
Press AUDIO during playback.
Press PAUSE/STEP during playback.
Loading batter
recorded with multiple angles.
RANDOM
Each time you press the RANDOM
E.P.M.
SLOW
If you are using a VIDEO CD/audio CD, skip steps 1
AUDIO
The picture enhancement menu
The current audio setting is
Each time you press the REPEAT
Each time you press the SLOW
Insert batterie
REPEAT
2 3
To resume normal playback, press
PAUSE/STEP
Operating with
VCD
and 2. Then at step 3, enter the number for the track
button, the random playback mode
ANGLE
button, the slow-motion speed
button, the repeat mode changes as
displayed.
appears.
Connection
While playing a scene recorded with
the PLAY button.
you want using the number buttons.
changes as follows.
follows.
changes.
multiple angles, the angle icon ( )
On cleanin
• The sound is muted during still
flashes in the DVD display.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
e.g.
Connecting to
SEARCH
Press the ANGLE button while the
polarized plug has two blades with one wider than the other. A grounding
T
angle icon is flashing.
type plug has two blades and a third grounding prong. The wide blade or the
2
Connecting to
To stop playback
third prong are provided for your safety. If the provided plug does not fit into
Connecting to
e.g.
Press STOP.
your outlet, consult an electrician for replacement of the obsolete outlet.
Fingerprints and
Chapter Repeat
2
DVD
DVD
Press
to highlight the space of
equipped with
Resuming playback from the same location
Chapter Random
DVD
VCD
sound deteriorat
Connecting to
To ANALOG AUDIO OUT
STOP
"C (Chapter)."
CD
outwards with a
Connecting to an amplifier equipped with a digital audio input
Title Repeat
Connecting to
DVD
clean.
1
Dolby Digital
Press STOP at the location where you
DVD/VIDEO C
Title Random
DVD
VCD
Track Repeat
The abbreviation of the language appears instead
2 channel digital stereo
To remove the disc
CD
Connecting to
want to interrupt playback.
ENTER
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
of the language name. Refer to the list of
Dolby Pro Log
Make sure to m
Press OPEN/CLOSE.
To audio inputs of
amplifier equipped with a digital audio input and speaker system (right and left front
STOP
The DVD video player memorizes
languages and their abbreviations.
VCD
DVD
Track Random
the amplifier
10. Protect the power cord from being walked on or pinched particularly at plugs,
Connecting to
All Repeat
speakers).
CD
VCD
the location where playback is
Remove the disc after the disc tray
CD
convenience receptacles, and the point where they exit from the apparatus.
DTS decoder .
stopped.
opens completely.
2
OPEN/CLOSE
3
Press ANGLE or
Enter the number for the chapter or
Selecting sound channels of VIDEO CDs
Connecting to
Repeat Off
number is displayed on the TV screen.
track you want, using
MPEG2 audio
You can switch left and right channels by pressing the
2
Press PLAY.
If you cannot w
number buttons.
AUDIO button repeatedly during playback.
Connecting to
Random Off
Each time you press the ANGLE
ANGLE
to the marks inside the battery compartment.
the disc lightly w
The DVD video player resumes
PLAY
2
Select the picture enhancement by
To OPTICAL
digital audio in
button, the camera angle changes.
Basic playb
When you use the number buttons, you can use
finish with a dry
playback from the location where
type digital
pressing E.P.M. or
DVD
the +10 button to select numbers from 10 through
3
Close the cover.
Repeating a specific segment
audio input
Do not use any
you stopped playback.
The indicators v
If you press the RANDOM button
VCD
When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches
Press DISPLA
99.
CD
benzine, comme
during playback, the DVD video
Playing a Dis
them to the title/chapter/track number indicators. Some discs may not permit this operation.
11. Only use attachments/accessories specified by the manufacturer.
Each time you press the button, the picture
spray for vinyl L
You can change the camera angle
DVD video d
On storing
e.g. To select chapter or track 25
player automatically starts random
ENTER
enhancement changes.
directly by pressing the number
1
Press A-B RPT at the beginning of the
Basic playback
playback after finishing the current
2
buttons corresponding to its angle
Component video (ColorStream
title, chapter or track.
segment (point A) you want to play
Playing in fast
Be sure to press the OPEN/CLOSE button to close
number instead of using the /
Some TVs or monitors are equipped with component video inputs. Connecting to
Notes on batteries
directions .......
repeatedly.
the disc tray after you remove the disc.
or
+10
Output sound conversion table (sampling frequency/quantization bit)
buttons.
these inputs allows you to enjoy higher quality picture playback.
Improper use of batteries may cause battery leakage and
2
Normal:
Press PLAY.
Playing frame
Do not store dis
Actual labels for component video inputs may vary depending on the TV
A-B RPT
corrosion. To operate the remote control correctly, follow the
Standard black level (7.5 IRE).
Playing in slow
The DVD video player starts random
or near heat sou
PLAY
instructions below.
manufacturer. (ex. Y, R-Y, B-Y or Y, C
2 3 0 : 0 8 : 1 6 9.6
Recording system
Resuming play
Discs
playback.
Do not store dis
12.Use only with the cart, stand, tripod, bracket, or table specified by the
• Do not insert batteries into the remote control in the wrong
In some TVs or monitors, the color levels of the playback picture may be reduced
DVD
Locating a Sp
Locating a specific chapter or track
Press the PLAY button within about
dust such as a b
Enhanced Black Level:
manufacturer, or sold with the apparatus. When a cart is used, use caution
direction.
VCD
slightly or the tint may change. In such a case, adjust the TV or monitor for
Track ...........
CD
5 seconds after you press the
• During playback:
Store discs verti
Enhanced Black Level (0 IRE).
when moving the cart/apparatus combination to avoid injury from tip-over.
• Do not charge, heat, open, or short-circuit the batteries.
optimum performance.
RANDOM button.
objects on discs
Do not throw batteries into a fire.
Locating a title
Example
2
warping.
• Do not leave dead or exhausted batteries in the remote
Press A-B RPT again at the end of the
Press SKIP
Notes
Locating a title
Movie 1:
TITLE
control.
DVD video
segment (point B).
the chapter or track number you want.
Linear PCM
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital
DVD
Brightness levels raised for
Locating a spec
discs
• Do not use different types of batteries together, or mix old
Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM
Playback starts from the selected chapter or track.
The DVD video player automatically
enhanced picture clarity.
Some discs may
and new batteries.
Locating a spec
A-B RPT
AUDIO OUT jack of the DVD video player.
returns to point A and starts repeat
numbers or elaps
• If you do not use the remote control for a long period of
SKIP
Notes
Playing chapter 3 of title 2
To locate succeeding chapters or tracks
Movie 2:
• Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "OPTICAL" or "COAXIAL" input of a
playback of the selected segment
time, remove the batteries to avoid possible damage from
Notes
• Refer to the owner's manual of the connected equipment as well.
To turn off the
For deeper, richer color
Receiver or Processor.
(A-B).
battery corrosion.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
• Do not move the DVD video player during playback. Doing so may damage the disc.
VIDEO CDs
DISPLAY agai
• Refer to the owner's manual of the connected equipment as well.
reproduction.
SKIP
Playback starts from the beginning of
• If the remote control does not function correctly or if the
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
from the wall outlet before making any connections.
Linear PCM 44.1 kHz/16 bit
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
Audio CDs
the current chapter or track.
operating range becomes reduced, replace all batteries
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
cause the DVD video player to malfunction.
Animation:
from the wall outlet before making any connections.
with new ones.
When you press twice, playback starts
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video
DVD video player away from the tuner and radio.
For enhanced color contrast.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
• If battery leakage occurs, wipe the battery liquid from the
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
player to malfunction.
from the beginning of the preceding
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
battery compartment, then insert new batteries.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
chapter or track.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
on, the speakers may be damaged.
STOP button on your remote control once the movie is completed.
on, the speakers may be damaged.
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
. Otherwise, high volume sound may damage your hearing as well as the speakers.
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD video player, you should generally
/
/
reduce the sharpness adjustment on your TV when viewing DVD video discs.
About
DVD
The
DVD
VCD
function described under that heading.
¡ B uenos d í a s!
Bonjour!
: You can use this function with DVD video discs.
DVD
Total playi
: You can use this function with VIDEO CDs.
VCD
: You can use this function with audio CDs.
CD
Playback sid
Title numbe
Amplifier equipped with an
VIDEO OUT
AUDIO OUT
TITLE
VIDEO
Y
P
P
B
R
MPEG2 audio decoder
To OPTICAL
To COAXIAL
type digital
e.g.
R
L
COAXIAL OPTICAL
type digital
S
ANALOG
BITSTREAM/PCM
:
:
audio input
mode.
audio input
Chapter Repeat
–
– –
– –
1
1
Chapter Random
ENG1 PCM 2CH
(red)
(white)
ENG2
D 2CH
Repeats the current
To P
Plays the chapters
chapter.
VIDEO
within the current title
Multifuncti
1
OUT
in random order.
Repeats the current
messages, e
e.g.
2
title.
:
:
–
– –
– –
1
1
Plays the titles in
Repeats the current
3
random order.
track.
46
Plays the tracks in
Repeats the entire
random order.
disc.
(red)
(white)
/
while the angle
Resumes normal
Amplifier equipped with
/
or the
– on the batteries
a digital audio input
playback.
Resumes normal
playback.
To COAXIAL
type digital
/ .
audio input
Audio system
5
®
) outputs/inputs
5
+10
, C
)
B
R
A–
BITSTREAM/PCM
jack
Dolby Digital
• During playback:
Bitstream
48 kHz/16 bit
48 kHz/16 bit
Example
48 kHz/20 bit
48 kHz/16 bit
or
repeatedly to display
CHP
48 kHz/24 bit
48 kHz/16 bit
96 kHz/16 bit
48 kHz/16 bit
VCD
96 kHz/20 bit
48 kHz/16 bit
96 kHz/24 bit
48 kHz/16 bit
OFF
DTS
Bitstream
MPEG1, MPEG2
Bitstream
44.1 kHz/16 bit 44.1 kHz/16 bit
MPEG1
44.1 kHz/16 bit
Some discs may not display track
Bitstream
DTS
numbers or elapsed time.
A– B
Advan
Struct
Accessi 26
Pressing
control c
Entering
Normally
location
the titles
Playing
VCD
CD
audio CD
Operating with the remote control
icons on the heading bar show the playable discs for the
FL DIM
CD
Repeati
DVD vid
Repeati
Playing
Point the remote control at the remote
* *
Chapter n
sensor and press the buttons.
Title 1
Setting
order ...
Chapter 1
Memor
Playing
: Title n
Playing
To resume normal playback
About the screen saver
To exit the picture enhancement selection
To turn off the angle number display
To resume normal playback
Locate a
4
2
2
Press PLAY.
Press AUDIO or
Press PLAY.
order ...
Press CLEAR.
Press ENTER.
Press PLAY.
If you pause a picture of a DVD video disc and leave it
Press CLEAR.
Zoomin
setting is displayed on the TV screen.
: Chapte
still for a long while, the screen saver of the DVD video
PLAY
PLAY
CLEAR
TOTAL
CHP
VIDEO C
PLAY
AUDIO OUT
CLEAR
VIDEO OUT
Locate a
VIDEO
Y
P
P
B
R
player automatically appears (when "Screen Saver" is
AUDIO
Zoomin
Selectin
set to "On"
43
R
L
COAXIAL OPTICAL
Track number
S
ANALOG
ENTER
BITSTREAM/PCM
: To stop
Within about 7 m (23 feet)
PLAY button.
(E.P.M.
indicator
To select a title and chapter number at the same
Connect either.
Notes
Note
Track 1
75
coaxial cable
time
Selectin
• Some discs may not permit random playback operation.
Notes
The sound is muted during slow-motion playback.
Automatic Power Off function
: Playba
Selectin
• You cannot use the random playback function in conjunction
Optical digital cable
• You can change the camera angle during still playback. The
Perform step 1, and enter a title number you want in the
current
If the DVD video player is stopped, or the screen saver
ENTER
(E.A.M
with the memory playback function.
camera angle changes to the new setting when you resume
space of "T (Title)" using the number buttons or the
is engaged for approximately 20 minutes, the DVD
To resume normal playback
To P
To Y
R
B
: Fast re
normal playback.
buttons then perform steps 2 to 4.
Note
video player will automatically turn itself off.
Each title
VIDEO
VIDEO
Selectin
Press CLEAR.
• If you pause a picture immediately after changing a camera
Actual effect to picture may vary depending on the TV. Make
Selectin
Distance: About 7 m (23 feet) from the front of the
is called
OUT
OUT
angle, the resumed playback picture may not display the new
selection according to your preference.
Note
CLEAR
remote sensor
To start playback from the beginning regardless
: To star
camera angle.
Pressing the CLEAR button resets the title and chapter
Changin
Angle:
About 30 in each direction of the front of
of the location where you stopped playback
Selectin
numbers. To clear the "T (Title)" and "C (Chapter)" display,
To turn off the audio setting display, press the
the remote sensor
1 Press STOP twice.
press the T button several times.
CLEAR button.
: Fast fo
Selectin
Note
"title number", "chapter number" or "track
* Do not expose the remote sensor of the DVD video
Selectin
STOP
Some discs may not permit repeat operation.
number" respectively.
player to a strong light source such as direct
To Y video input
There may be discs that do not have these numbers.
: To loca
Selectin
sunlight or other illumination. If you do so, you may
Notes
On-scre
not be able to operate the DVD video player via the
2 Press PLAY.
• When you turn on the DVD video player or replace a disc,
VIDEO OUT
AUDIO OUT
To P
VIDEO
Y
P
P
B
R
remote control.
player returns to the initial default setting
Notes on copyright
On-scre
: To beg
PLAY
Functi
If you select a sound track which is not included on the disc,
R
L
COAXIAL OPTICAL
S
ANALOG
BITSTREAM/PCM
To P
the DVD video player plays a prior sound track programmed
Connect either.
It is forbidden by law to copy, broadcast, show,
on the disc.
Notes on the remote control
: To pau
Custom
broadcast on cable, play in public, and rent copyrighted
75
coaxial cable
• Some discs allow you to change audio selections only via
• Direct the remote control at the remote sensor of the DVD
material without permission.
the disc menu. If this is the case, press the MENU button
video player.
Optical digital cable
Setting
To resume normal playback
• If you want to return to the beginning of a DVD video
: To turn
and choose the appropriate language from the selections on
• Do not drop or give the remote control a shock.
Setting
Others
disc, open and close the disc tray once with the
DVD video discs are copy protected, and any recordings
Press CLEAR.
the disc menu.
• Do not leave the remote control near an extremely hot or
OPEN/CLOSE button before pressing the PLAY
made from these discs will be distorted.
humid place.
CLEAR
button.
• Do not spill water or put anything wet on the remote
The on-s
Table o
This product incorporates copyright protection
control.
Audio selection from the menu
VIDEO CD
Notes
Before
• Do not open the remote control.
technology that is protected by method claims of certain
: Data tra
"Bitstream"
"Analog 2ch"
• The DVD video player's memory is also cleared when:
U.S. patents and other intellectual property rights owned
Notes
Specifi
= Amou
ANALOG AUDIO
BITSTREAM/PCM
– you change the parental lock setting
• Some discs may not permit A-B repeat operation.
by Macrovision Corporation and other rights owners.
OUT jacks
jack
DVD vid
DVD
LIMITE
menu language
• You cannot set the A-B repeat function for a segment that
Use of this copyright protection technology must be
The larg
Bitstream
48 kHz/20 bit
– you open the disc tray.
PLAYE
includes multiple camera angles
authorized by Macrovision Corporation, and is intended
48 kHz/16 bit
but this d
48 kHz/16 bit
Notes
• There may be a difference in the location where playback
• You can specify a segment only within the current title or
for home and other limited viewing uses only unless
48 kHz/20 bit
quality.
48 kHz/16 bit
• Some titles may not display chapter numbers.
resumes depending on the disc.
track (VIDEO CD).
otherwise authorized by Macrovision Corporation.
48 kHz/24 bit
48 kHz/16 bit
TRK
• If you press and hold the SKIP
• Settings you changed using the on-screen displays while the
• There may be a slight difference between point A and the
48 kHz/16 bit
: CD-Tex
Reverse engineering or disassembly is prohibited.
panel during playback, the DVD video player performs fast
DVD video player keeps a location in the memory may
location where playback actually resumes depending on the
48 kHz/20 bit
Displays
reverse or fast forward playback. You can vary the speed by
function only after the memory is cleared.
48 kHz/24 bit
disc.
CDs. (So
CD
Playing track 6
pressing the button repeatedly.
dependin
Bitstream
To locate chapters or tracks during fast reverse or fast
48 kHz/16 bit
Bitstream
forward playback, first press the PLAY button to resume
: The on
44.1 kHz/16 bit
44.1 kHz/16 bit
normal playback, then use the SKIP
44.1 kHz/16 bit
• When you set "Title Stop" to "Off"
(Noise)
VCD
Bitstream
chapters in another title. If you go back to the preceding title
by pressing the SKIP
locates the first chapter of the title. When "Title Stop" is set
to "On," you can access chapters only within the current title.
2
PLAY
2
2
2
Dimm
Norma O
ENTER
1, 2
1, 2
CLEAR
CLEAR
1, 2
CLEAR
CLEAR
REPEAT
DVD v
1
A-B RPT
Title
/
while the audio
• Use DVD video discs encoded via
the MPEG2 recording system.
The DVD video player starts repeat
Playback starts from the selected
AC IN
A - B
M
R
• Make the following setting.
chapter or track.
playback.
Alternatively leave the DVD video
Each time you press the AUDIO
30
30
Press the PLAY button within about
). To turn off the screen saver, press the
button, the audio settings included
player unattended for about 5
On-screen display
5 seconds after you press the
seconds after having made a
on the DVD video disc change.
21
Random playback indicator
REPEAT button.
selection.
"Audio Out Select"
Recording system
VIDEO CD/audio CD
25
If you press the /
can select output sound format.
22
Angle
20
Repea
22
The DVD video player ' s memory is
cleared.
video input
B
• Make the following setting.
42
Playback starts from the
DVD
beginning of the current title.
On-screen display
video input
R
Playback starts from the
VCD
"Audio Out Select"
CD
21
TV or monitor with
beginning of the disc.
component video inputs
Aud
• Make the following setting.
On-screen display
38
40
and output jacks on the rear panel
"Audio Out Select"
"Analog 2ch"
ANALOG AUDIO
BITSTREAM/PCM
43
OUT jacks
jack
.
41
48 kHz/20 bit
• During playback:
48 kHz/16 bit 48 kHz/20 bit
.
33
48 kHz/16 bit
48 kHz/16 bit
Example
48 kHz/20 bit
48 kHz/16 bit
48 kHz/24 bit
48 kHz/16 bit
or
96 kHz/16 bit
48 kHz/16 bit
S3125A
CD
96 kHz/20 bit
48 kHz/16 bit
96 kHz/24 bit
48 kHz/16 bit
Playing track 6
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
or
, you can access
(Noise)
Bitstream
45
: 3D (N-2-2) sound enhancement can function.
button, the DVD video player
24
25
Select:
Page
38
"Bitstream"
40
To wall outlet
MPEG
35
/
buttons, you
40
25
.
23
Select:
Page
38
"PCM"
40
Select:
Page
38
"PCM"
40
ANALOG AUDIO
or select a disc
OUT jacks
48 kHz/16 bit
48 kHz/20 bit
TRK
48 kHz/24 bit
button on the front
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
3
44.1 kHz/16 bit
button.
(Noise)
31
29
27
25
23
21
17
33
35
19
Advertisement
