hit counter script
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite E200
  6. Maintenance manual

Toshiba Satellite E200 Maintenance Manual page 170

Hide thumbs Also See for Satellite E200:
Table of Contents

Advertisement

4 Replacement Procedures
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4-13.
1. Remove four M2x3 black flat head screws.
2. Remove the two brackets.
3. Release the following 4 latches on the slot ODD bezel, in that order:
- Two above latches.
- Two below latches.
ODD bezel
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-13.
1. Place the slot ODD bezel in the correct position and secure the following 4 latches, in
that order:
- Two above latches.
- Two below latches.
2. Seat the two brackets and secure it with four M2x3 black flat head screws.
4-28
Downloaded from LpManual.com Manuals
Latch
M2x3 black flat head screw
Figure 4-13 Removing the bracket from the ODD drive
4.9 ODD Bay Module
ODD
ODD bracket
ODD side bracket
Satellite/E200/E205
M2x3 black flat
head screw
Maintenance Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite E200

Related Products for Toshiba Satellite E200

This manual is also suitable for:

Satellite e205

Table of Contents