4 Replacement Procedures
4.2
Battery Pack/Bridge Media
4.2.1
Battery Pack
Removing the Battery Pack
Remove the battery pack according to the following procedures and Figure 4-1.
CAUTION: When handling the battery packs, use care not to short circuit the
terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up
their casing.
1. Turn the computer upside down so that the back is facing you.
2. Slide out the battery lock.
3. Slide the battery release latch and remove the battery pack from the computer.
NOTE: Dispose of the used battery packs as required by local ordinances or
regulations.
4-8
Downloaded from LpManual.com Manuals
Battery latch
Figure 4-1 Removing the battery pack
4.2 Battery Pack/Bridge Media
Battery lock
Battery
Satellite/E200/E205
Maintenance Manual