4.21 SmartCard unit (SmartCard model only)
Installing the SmartCard unit
To install the SmartCard unit, follow the steps below and refer to Figure 4-35.
1. Insert the SmartCard unit into the guides of the base assembly.
2. Secure the SmartCard unit with the following screw.
• M2×3C
3. Stick the insulator on the SmartCard unit in place.
4. Stick the glass tape in place.
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-61
BIND screw
4 Replacement Procedures
×1