Toshiba TECRA A9 Series Maintenace Manual page 136
Toshiba tecra a9 series; tecra s5; tecra p5; satellite pro s200 notebook
Hide thumbs
Also See for TECRA A9 Series:
- Maintenance manual (405 pages) ,
- User manual (258 pages) ,
- Resource manual (52 pages)
Table of Contents
Advertisement
3.3 Setting of the hardware configuration
7. "Create DMIINFO TXT (Y/N) ?" is displayed. Press Y, then the
DMI information (text data) is written to the Floppy disk, etc.
•
•
•
After completion of the above settings, H/W configuration & DMI
information are appeared in order. Check the contents and press Enter.
Subtest 2
DMI information save
This is one of tools to copy the DMI information to a new PCB after
replacing.
This subtest saves all the DMI data in a floppy disk.
Subtest 3
DMI information recovery
This is one of tools to copy the DMI information to a new PCB after
replacing.
This subtest writes all the DMI data in the floppy disk into the new PCB.
NOTE: Since the data of UUID is updated every time when this subtest, DMI information
recovery, is done, the saved UUID data is not written.
Subtest 4
System configuration display
This subtest displays the information of the system configuration.
When the following message appears, confirm the contents and press Enter.
For more details on the system configuration information, refer to "3.25
System configuration".
Subtest 5
E2PROM test (MAC/GUID/DMI)
It checks whether the MAC address, GUID of IEEE1394 and DMI
information are written.
TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
Setting of the HWSC
Setting of the UUID
Display of the DMI information (including UUID)
Press [Enter] key
3 Tests and Diagnostics
[CONFIDENTIAL]
3-11
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
