Marking Indexes During Recording - Sony DVO-1000MD Instructions For Use Manual

Hide thumbs Also See for DVO-1000MD:

Manual (116 pages)

Instructions for use manual (69 pages)

Specification (4 pages)

Table Of Contents

Table of Contents

Enlarged version

For detailed information on how to turn the power

on or off, see "Turning the Power On/Off" on page

15.

Press the OPEN/CLOSE button.

The disc tray opens.

The message changes to "OPEN" on the front panel

display.

Place the disc on the tray.

With the recording/playback surface facing

down

Press the OPEN/CLOSE button. Or push the disc

tray lightly.

The disc tray closes.

The DISC IN display blinks and the message "Now

loading..." appears on the front panel display.

When the DISC IN display stops blinking, go to

step 5.

Press the zREC button.

The unit starts recording of one title.

To stop recording that title, press the xSTOP

button.

Repeat recording of the remaining titles by

repeating steps 5 and 6.

The titles are numbered in the sequence they are

recorded.

Title 2

Title 1

Recording

stops

starts

Recording

starts

To pause during recording

Press the XPAUSE button.

To resume recording, press the XPAUSE button again.

Note

When the unit is remotely controlled with the RS-232C

remote interface, the STOP command works as the

pause task or stop recording task. Which task is effective

depends on the setting of the 232C STOP item (see

page 49) of the ENHANCED MENU of the SETUP

MENU.

If buttons on the front panel do not

function even if you push them

The KEY INHIBIT item (see page 47) of the SETUP

MENU is set to "ON."

Thus, the key-lock function is activated so that all

buttons except the MENU button, the LIST button, the

power switch, and the OPEN/CLOSE button are

deactivated to prevent you from pressing buttons

accidentally.

To re-activate the buttons, set the KEY INHIBIT item to

"OFF."

However, when the unit is in menu operation status, you

can use the B, b, V, v, and SET buttons.