Table of Contents
Advertisement
6 Use the arrow keys to select Run Diagnostics and press
.
Enter
TDIAGS asks you to confirm that you want to run the
diagnostic test.
7 To run the diagnostic test, press
The following sections explain the diagnostic test options.
Choosing Test Options
Before the test begins, the program asks several questions about
which components you wish to test.
1 The first question asks if you want to test the diskette
drive(s). The computer displays:
Test the FDD (Y/N)?
2 To test the diskette drive(s), type
bypass the test, type
The FDD (floppy disk drive) test tests the diskette drive. Make
sure you attach the external diskette drive or install it in the
SelectBay before running this test.
The test writes test patterns on any disk in the drive. These
patterns destroy all information on the disk(s). Make sure
there is no information you want to keep on the disk(s)
you use.
If you choose the FDD test, you must format and write-enable
the disk before the test. Move the write-protect tab to cover the
square hole.
The next prompt asks if you want to test the hard disk drive:
Test the HDD (Y/N)?
The Diagnostic Test
Choosing Test Options
(for yes), and press
Y
and press
Y
and press
.
N
Enter
359
.
Enter
. To
Enter
- Quick Links:
- The System
Hide quick links:
Advertisement
Table of Contents
