Option: Power On Display
Settings: Internal/External (default) or Simultaneous
Usage: Controls whether the system sends output to the internal display,
the external display, or both when you turn the computer on in
boot mode.
Restart: Y
Option: Text Mode Stretch
Settings: Enable or Disable (default)
Usage: The screen has a height of 600 pixels. In a text mode, which uses
400 pixels, this leaves a small amount of space above and below
the text on the screen. Enabling this mode stretches the text to fill
the entire screen.
Restart: N
Changes you make to the VGA Segment Address setting in
TSETUP will not affect Windows 95. To set this option for
Windows 95, use the Display adapters icon in Windows 95
Device Manager. Refer to "Using Device Manager to Config-
ure Your System" on page 253.
HARD DISK
This section shows that the hard disk is set to Enhanced IDE
mode.
Option: HDD Mode
Settings: Enhanced (default) or Standard IDE
Usage: Use Enhanced for MS-DOS or Windows 95. Use Standard for
Novell Netware, or Unix environments that do not recognize hard
disks larger than 540MB.
Restart: Y
345
TSETUP
HARD DISK