hit counter script

Overview - Toshiba PORTEGE A200 series Maintenance Manual

Personal computer
Hide thumbs Also See for PORTEGE A200 series:
Table of Contents

Advertisement

4.1 Overview

4
Replacement Procedures
4.1
Overview
This chapter describes the procedure for removing and replacing the field replaceable units
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one.
The chart below provides a guide as to which other FRUs must be removed before a
particular FRU can be removed. The numbers in the chart indicate the relevant section
numbers in this manual.
In all cases when removing an FRU, the battery pack must also be removed. When repairing
an FRU that is the potential cause of a computer fault, use the chart to determine the order in
which FRUs need to be removed.
?Chart Notation
This chart shows which unit(s)
you need to remove in
advance when you replace one
unit.
Example:
When you wan to replace
HDD, you need to remove
units in the hatched boxes
above the boxes in which the
HDD is.
It is not needed to remove the
Connector panel, Optical
drive, LCD mask/FL inverter
/LED board, LCD unit and
Fluorescent lamp.
PORTEGE A200 Maintenance Manual (960-499)
4 Replacement Procedures
4-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents