Expansion Cards And Backup Units - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX300 S7:

Table of Contents

Expansion cards and backup

This chapter provides information on how to install, remove or replace

expansion cards and backup units.

Safety notes

Do not damage or modify internal cables or devices. Doing so may

cause a device failure, fire, or electric shock.

Devices and components inside the server remain hot after

shutdown. After shutting down the server, wait for hot components to

cool down before installing or removing internal options.

Circuit boards and soldered parts of internal options are exposed and

can be damaged by static electricity. Always discharge static build-up

(e.g. by touching a grounded object) before handling electrostatic-

sensitive devices (ESDs).

Do not touch the circuitry on boards or soldered parts. Hold circuit

boards by their metallic areas or edges.

If devices are installed or disassembled using methods other than

those outlined in this chapter, the warranty will be invalidated.

For further information, please refer to chapter

information" on page

TX300 S7 / RX350 S7

Upgrade and Maintenance Manual

Primergy rx350 s7