Summary of Contents for Toshiba Portégé R30-A Series
Page 1
Series User’s Guide If you need assistance: Technical support is available online at Toshiba’s Web site at support.toshiba.com. At this Web site, you will find answers for many commonly asked technical questions plus many downloadable software drivers, BIOS updates, and other downloads.
Page 2
(“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK...
Page 3
IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR...
Page 4
TV reception. Shielded cables must be used between the external devices and the computer's ports. Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.
Page 5
The Special Interest Group. Bluetooth modules enable wireless networks over two or more (up to a total of seven) TOSHIBA portable devices. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for more information.
Page 6
Because products with wireless technology operate within the guidelines found in radio frequency safety standards and Bluetooth recommendations, TOSHIBA believes wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
If you should experience any such problem, immediately turn Bluetooth off your or Wireless LAN device. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for more information. Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range.
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific...
You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required. Location of the Required Label (Sample shown below.
Page 10
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à...
This product complies with any mandatory product specification in any country/region where the product is sold. In addition, the product complies with the following: EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the...
Page 12
United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 13
Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être utilisés endroits extérieur en France. Vous pouvez contacter l’Autorité de Régulation des Télécommunications (http://www.art- telecom.fr) pour la procédure à suivre. Italia: License required for indoor use. Use with outdoor installations not allowed.
Page 14
listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network. ❖ The 5 GHz Turbo mode feature is not allowed for operation in any European Community country. ❖...
Page 15
2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 17
INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 18
Blu-ray and Blu-ray Disc are trademarks of the BD Association. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 19
Computer Recycling Information As part of a commitment to people and the future, Toshiba promotes the efficient use of resources by working to achieve our zero-waste- to-landfill goal at all our production sites. In addition to our existing waste reduction and recycling policies, Toshiba is strongly committed to reducing electronic waste.
Contents Introduction.............26 This guide ............28 Safety icons ............29 Other icons used..........29 Your computer’s features and specifications ........... 30 Documentation ............ 30 Service options ............ 30 Chapter 1: Getting Started........31 Selecting a place to work ........31 Setting up a work environment ...... 31 Keeping yourself comfortable ......
Refresh your PC (with user’s data) ....62 Reset your PC ..........64 Installing drivers and applications....67 Using the TOSHIBA Dual Pointing Device ... 68 Using the touch pad ..........69 Adjusting touch pad settings ......72 Disabling or enabling the touch pad ....72 Connecting an external device ......
Page 22
Recording optical media ........ 88 Removing a disc with the computer on ..88 Removing a disc with the computer off ..89 Toshiba’s online resources ........89 Chapter 3: Mobile Computing ........ 90 Toshiba’s energy-saver design......90 Running the computer on battery power..... 90 Battery Notice ..........
Contents Determining remaining battery power.... 95 What to do when the main battery runs low............96 Setting battery notifications ......96 Conserving battery power ......97 Power Plans ........... 98 Using the eco power plan ........99 Changing the main battery......... 100 Removing the battery from the computer..
Page 24
Power supply mode settings ....... 131 Function Key ............133 Recovery Media Creator ........134 Service Station........... 134 TOSHIBA Application Installer ......135 Fingerprint Authentication Utility ....... 136 Fingerprint utility limitations ......136 Using the Fingerprint Authentication Utility ............136 Fingerprint Logon.........
Windows operating system .... 164 If you need further assistance......169 Contacting Toshiba........170 Other Toshiba Internet Web sites ...... 170 Toshiba’s worldwide offices ......170 Appendix A: TOSHIBA Function Keys ....172 Functions ............172 Lock (Instant security) ........173 Power plan ...........
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to conserve computer energy.
Page 27
Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’...
For more detailed information about the features and specifications on your particular model, please visit Toshiba’s Web site at support.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 140.
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. Please read the safety instruction information on the Quick Start document (that shipped with your computer) carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause bodily injury, property damage, or...
Getting Started Selecting a place to work ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Getting Started Selecting a place to work ❖ When typing, keep your wrists straight and try not to rest your wrists on the notebook. Support your arms on your forearm area. The forearms can be supported by the chair arm supports or the desk surface. ❖...
Getting Started Selecting a place to work ❖ When using a notebook for long hours, it may be more comfortable to dock the notebook and use an external keyboard, mouse and monitor. ❖ The keyboard and mouse (or trackball) should be close to your elbow level.
Getting Started Selecting a place to work Taking breaks and varying tasks ❖ Change the way you work so that you are not stuck in the same posture for long periods of time. Some people find it comfortable to occasionally stand while using the notebook.
Getting Started Selecting a place to work Seeking additional help Follow the advice from your employer’s company health and safety staff. Contact them if you need assistance making adjustment to your workstation or adjusting the lighting. Again, if you experience persistent or recurrent pain, ache, numbness, burning, or stiffness you should promptly see a qualified health care provider.
Getting Started Selecting a place to work Precautions Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer. ❖...
Page 38
Getting Started Selecting a place to work Consider using a hard computer insulating pad or similarly suitable hard insulating material when using a computer on your lap. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in...
Always use the TOSHIBA AC adaptor that was provided with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Page 41
Getting Started Connecting to a power source AC adaptor Power cord/cable AC adaptor cord (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to...
Getting Started Charging the main battery Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows white. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it, see “Exploring Your Computer’s Features” on page 106. NOTE When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display...
Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your Product. Product registration can be completed by one of three methods: From the Toshiba Web site at register.toshiba.com: Type in the requested information and complete the registration process.
Getting Started To Shut down your computer To Shut down your computer From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. ® When the Windows charms appear, click or touch the ) charm.
Getting Started To Restart your computer To Restart your computer From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. ® When the Windows charms appear, click or touch the ) charm.
Adding optional external devices NOTE Before adding external devices, Toshiba recommends setting up your software. See “Setting up your software” on page After starting your computer for the first time you may want ❖...
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page Depending on the model, your computer may have two or four memory module slots.
Page 49
Getting Started Adding memory (optional) To avoid damaging the computer’s screws, use a small Phillips screwdriver that is in good condition. Installing a memory module with the computer’s power on may damage the computer, the module, or both. The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules.
Page 50
Getting Started Adding memory (optional) In the lower right of the screen click or touch the Power ( ) icon. Shut down option Power (Sample Image) Shut down Highlight while holding the key, and Shut down Shift then click or touch the option.
Page 51
Getting Started Adding memory (optional) Using a small Phillips screwdriver, loosen the captive screw(s) that secure the memory module slot cover. Remove the memory module slot cover. Place the screw(s) and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module.
Page 52
Getting Started Adding memory (optional) Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch connector latch (Sample Illustration) Aligning the memory module with the socket Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the...
Page 53
Getting Started Adding memory (optional) latch latch (Sample Illustration) Pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Slot B Slot A (Sample Illustration) Inserting the memory module into the slot NOTE...
Getting Started Removing a memory module Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 55
Getting Started Removing a memory module Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Sleep or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Getting Started Removing a memory module Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Cancel. If unsure, cancel and try again. Recovering the Internal Storage Drive NOTE To purchase an optional external writable optical disc drive, visit the Toshiba Web site at accessories.toshiba.com. Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary.
Getting Started Recovering the Internal Storage Drive A recovery image of your computer is stored on the internal storage drive, and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below. However, it is strongly recommended that you create recovery media.
Page 59
Search charm and, in the Search field, type Recovery Media . In the list that appears, click or touch your Creator selection. The TOSHIBA Recovery Media Creator dialog box displays. (Sample Image) TOSHIBA Recovery Media Creator dialog box...
Page 60
If you are copying files to a USB flash drive, connect a USB flash drive of the required minimum capacity (as specified in the TOSHIBA Recovery Media Creator utility) to your computer. All information stored on your DVDs or USB flash drive(s) will be erased during the process of creating the recovery media.
Getting Started Recovering the Internal Storage Drive Restoring from recovery media The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page 85).
Windows Store. Your PC settings and any Desktop Applications installed from media or websites will be deleted. Toshiba does not guarantee that your data will not be deleted during the Refresh process. Please make a back up of your data to external media before executing this process.
Page 63
Get Started The “Refresh your PC” screen appears. (Sample Image) Refresh your PC screen Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page 85).
Getting Started Recovering the Internal Storage Drive Click or touch the button to begin. Next The “Ready to refresh your PC” screen appears. (Sample Image) Ready to refresh your PC screen You will be prompted to refresh your system. Click or touch the button.
Page 65
Getting Started Recovering the Internal Storage Drive ® When the Windows charms appear click or touch the ) charm. Settings Click or touch Change PC Settings The PC settings window appears. (Sample Image) PC settings screen Click or touch Update and recovery Click or touch Recovery Select...
Page 66
Getting Started Recovering the Internal Storage Drive (Sample Image) Do you want to fully clean your drive? screen Select one of the following options: ❖ Just remove my files ❖ Fully clean the drive The “Ready to reset your PC” screen appears. (Sample Image) Ready to reset your PC screen Click or touch the button.
Getting Started Recovering the Internal Storage Drive Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. NOTE You must have an Internet connection to reinstall applications.
Touch pad Touch pad ON/OFF buton Touch pad primary Touch pad secondary button button (Sample Illustration) TOSHIBA Dual Pointing Device buttons ® —Moves the cursor and AccuPoint II pointing device selects items on the screen. To move the cursor, gently push the pointing device in the direction you want the cursor to move.
Getting Started Using the touch pad Using the touch pad NOTE Some of the touch pad operations described in this section are only supported in certain applications, and only on certain models. You can use the touch pad (the small, touch-sensitive area in front of the keyboard) and the adjacent control buttons to: ❖...
Page 70
Getting Started Using the touch pad Do the following: Example: Move the on- Slide your finger across the touch screen pointer pad in the direction you want to move the pointer. To move the pointer a longer (Sample Illustration) distance, slide your finger several Pointer moves to the times across the touch pad in the right...
Page 71
Getting Started Using the touch pad Do the following: Example: Scroll vertically Slide two fingers along the right edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance. (Sample Illustration) Vertical scrolling active area Scroll Slide two fingers along the...
Touch pad setting options vary by computer model. The touch pad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit support.toshiba.com. Disabling or enabling the touch pad The touch pad is enabled by default. To enable/disable the touch pad, press .
Getting Started Using external display devices Connect the device’s video or USB cable to the port on the computer and to the device. Connect the device’s power cable to a live electrical outlet (if applicable). Turn on the external device (if applicable). Your computer may automatically detect the external device.
Getting Started Using external display devices manual that came with the television or display device for more information. Your computer should automatically detect the external display device. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen.
Getting Started Using external display devices This cycles through the settings in the following order (the last two options are available if an external monitor is connected): ❖ PC screen only ❖ Duplicate ❖ Extend ❖ Second screen only (Sample Image) Display options window NOTE The ( ) + keys navigate through the options without...
Getting Started Customizing your computer’s settings Customizing your computer’s settings There are several ways in which you can customize your computer to suit your particular requirements. You can go into your computer settings to make adjustments to your computer to suit your needs. From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right ®...
Getting Started Caring for your computer Moving the computer Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive indicator light stops glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since...
Learning the Basics Using the keyboard ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
For example, turns the touch pad ON/OFF. For more Fn + F9 information, see “TOSHIBA Function Keys” on page 172. ® Special Windows keys ® Windows Application key ®...
Learning the Basics Using the keyboard Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.
Learning the Basics Backlit keyboard Backlit keyboard (Available on certain models.) Your keyboard may have a backlight illumination feature. If the keyboard backlight setting is set to Auto, the backlight turns on when you type on the keyboard and turns off after a certain interval when you stop typing.
Learning the Basics Mouse properties —Tap quickly twice to zoom in. For example, Double-tap double-tap a section of a Web page to zoom in on that section. Double-tap again to zoom out. —In some apps (such as Maps and Games), you can Pinch zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them...
Learning the Basics Saving your work Starting an app from the Start screen To Start an app on the Start screen, move your pointer over the appropriate tile and click or touch to open, or swipe your finger to the left from the right edge of the screen. To Start an app using the Search function, move your pointer to the upper-right corner of the screen or swipe in from the ®...
Learning the Basics Backing up your work Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, external storage media, or to a network, if available.
Learning the Basics Using the optical disc drive NOTE When viewing DVD movies use the DVD Player software that came with your computer. Optical disc drive components The optical disc drive is located on the side of the computer. Your optical disc drive may look like this: Drive in-use indicator light Eject button Manual eject hole...
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Playing optical media If you insert an optical disc into the optical disc drive and the Auto-Run feature does not automatically start your disc, try launching the optical disc manually.
These problems are not due to any defect in your Toshiba computer or optical disc drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Gently press the tray in to close it. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
The battery life rating is only achieved on the select models and configurations tested by Toshiba under the specific test settings at the time of publication and is not an estimate of a system’s battery life under any conditions other than the...
The battery needs to be charged before you can use it to power the computer. Always use the AC adaptor specified by Toshiba. You can order a Toshiba AC adaptor from Toshiba’s Web site at accessories.toshiba.com. NOTE Battery charge time may vary depending on the applications, power management settings, and features used.
Mobile Computing Charging batteries TECHNICAL NOTE: The recharging of the battery may not occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computer's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.
Mobile Computing Monitoring battery power NOTE Depending on your system, the RTC battery may only charge while the computer is turned on. To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.
Mobile Computing Monitoring battery power HINT: Be careful not to confuse the battery light )/power light ( ), and the power button light. When the power light or power button light flashes amber, it indicates that the system is suspended (using ®...
Mobile Computing Monitoring battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Mobile Computing Monitoring battery power Click or touch Change advanced power settings The Advanced settings tab of the Power Options window appears. Double-click or touch to display the battery Battery options. (Sample Image) Advanced settings tab of Power Options screen Configure the alarm settings to suit your needs.
Mobile Computing Monitoring battery power These power-saving options control the way in which the computer is configured. By using them, you can increase the length of time you can use the computer before you need to recharge the battery. ® Microsoft has combined these options into preset Power Plans.
Mobile Computing Using the eco power plan NOTE To edit a plan or to edit advanced settings, continue to the following steps. Click or touch to choose the Change plan settings plan you want to edit. This screen allows you to change basic settings. Click or touch Change advanced power settings access settings for battery notification levels, internal...
Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 101
Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide and hold the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Mobile Computing Changing the main battery Inserting a charged battery To insert a battery: Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. Insert the charged battery into the slot until the latch clicks.
Do not expose the computer to fire. The battery could explode. Do not turn on the computer’s power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or computer failure including but not limited to the loss of data.
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. Toshiba is dedicated to preserving the environment by sponsoring , a program of the Call2Recycle™...
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the Start screen The Start screen is the launching pad for everything you can ® do in the Windows operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
Exploring Your Computer’s Features Exploring the Start screen For detailed information on the new functionality, refer to the ® Windows Help and Support. App tiles ® (Sample Image) Windows Start screen Charms ® Use the Windows charms to start apps, find documents, set up system components, and perform most other computing tasks.
Exploring Your Computer’s Features Exploring the desktop Tiles Tiles can be accessed and launched from the Start screen. Typical Start screen tiles are the Desktop tile and Mail tile, as well as tiles representing all other applications downloaded to your system. Exploring the desktop You can use its features to start applications, find documents, set up system components, and perform most...
Page 109
Exploring Your Computer’s Features Exploring the desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking or touching the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.
Exploring Your Computer’s Features ® Windows Store Notification area The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears.
Next Your computer should then be connected. NOTE To enable or disable wireless communication, use the key. For more information see “TOSHIBA Fn + F8 Function Keys” on page 172. NOTE When Airplane mode is OFF, the wireless indicator light will be lit.
Exploring Your Computer’s Features Exploring audio features Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality. Accessing a network For specific information about connecting to the network, consult your network administrator. Many hotels, airports, ®...
Exploring Your Computer’s Features Exploring audio features When you have finished recording, click or touch the button. Stop Recording dialog box appears. Save As To save the file, type a file name, and then click or touch Save Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Exploring Your Computer’s Features Using the Web Camera Using the Web Camera Your computer may come with a built-in Web Camera. With this Web Camera you can do the following: ❖ Take pictures and record videos with your computer ❖ Chat with others and have them see you while using instant messaging (IM) programs ❖...
Exploring Your Computer’s Features ® Using an ExpressCard ® Using an ExpressCard (Available on certain models.) ® ® The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows ® you to replace one ExpressCard with another while the computer is on.
Exploring Your Computer’s Features Using the Memory card reader ® Removing an ExpressCard If you are not currently on the Desktop, choose the Desktop tile on the Start screen, otherwise skip to step 2. Prepare the card for removal by clicking on or touching button ( ), if necessary, in the Show hidden icons notification area and then selecting the...
Exploring Your Computer’s Features Using the Memory card reader NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag- ® and-drop feature of the Windows operating system. Inserting memory media NOTE To locate your Memory card reader, please refer to your...
Exploring Your Computer’s Features Using the expansion port Highlight, and then click or touch the item you would like to eject. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware...
Page 119
Port Replicator, your computer must be properly aligned with the Port Replicator. For more information, consult the user’s manual that came with your Port Replicator, or visit support.toshiba.com. On some computer models, you can attach an extended life battery to the expansion port. To find expansion devices compatible with your computer model, please visit accessories.toshiba.com.
Utilities ® eco Utility ® eco Utility ® The eco Utility monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. ® To access the eco Utility From the Start screen begin typing eco Utility Click or touch eco Utility...
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 123
Utilities Password Utility To set a supervisor password: To access Supervisor Password from the Start screen begin typing Password Utility Click or touch Password Utility (Sample Image) Supervisor Password tab Click or touch Supervisor Password Click or touch Enter your password, and then enter it again to verify. Click or touch NOTE Under User Policy, this option may or may not ask for...
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 125
Utilities Password Utility To register a password for the power-on password functions: To access User Password from the Start screen begin typing Password Utility Click or touch Password Utility Click or touch User Password (Sample Image) User Password tab Click or touch Enter your password, and then enter it again to verify.
Utilities Password Utility Deleting a user password To cancel the power-on password function: To access User Password from the Start screen begin typing Password Utility Click or touch Password Utility A pop-up screen appears asking for a password. Enter your password, and then click or touch Verify Click or touch Delete...
Utilities System Settings System Settings System Settings is the TOSHIBA configuration management ® tool available through the Windows operating system. To access it: To access System Settings from the Start screen begin typing System Settings Click or touch System Settings The System Settings screen appears.
Page 128
Utilities System Settings ❖ —Allows you to change the sequence in Boot Options which your computer searches the drives for the operating system ❖ —Allows you to configure boot priority Boot Priority settings. ❖ —Reduces the time needed for the Boot Speed BIOS to initialize, using either the Fast or Normal settings.
Utilities Sleep Utilities Sleep Utilities This utility displays whether the “USB Sleep and Charge function” is enabled or disabled and shows the position of the USB port that supports the “USB Sleep and Charge function.” To access Sleep Utilities from the Start screen begin typing System Settings Click or touch...
Page 130
Utilities Sleep Utilities ❖ NOTE When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF . USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Utilities Sleep Utilities Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Enabling/Disabling USB Sleep and Charge This utility can be used to enable or disable the USB Sleep and Charge function.
Page 132
Utilities Sleep Utilities (Sample Image) Sleep and Charge screen NOTE With certain external devices, the USB Sleep and Charge function may not work no matter which charging mode you select. In those cases, disable USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device.
Function Key NOTE The Function option is disabled by default. TOSHIBA Function Key enables you to activate functions by pressing specific keys either singly or in combination with Fn. Some functions show the toast notification at the edge of the screen. These settings turn notifications ON/OFF.
Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the utility to create recovery media, see “Creating recovery media”...
TOSHIBA Application Installer NOTE You must have an Internet connection to reinstall applications. The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: To access TOSHIBA Application Installer from the Start...
TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Utilities Fingerprint Authentication Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are ® saved and associated with the user’s Windows user account. When the user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints;...
Page 138
Utilities Fingerprint Authentication Utility ❖ Clean the reader with a lint-free cloth. Do not use detergent to clean the reader. ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate.
TOSHIBA does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this...
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program or application stops responding.
If Something Goes Wrong Problems when you turn on the computer If you are working in a program that suddenly freezes, chances are the program has stopped responding. You can exit the program without shutting down the operating system or closing other programs. To close a program that has stopped responding: Press , and...
Page 142
If Something Goes Wrong Problems when you turn on the computer The computer displays the WARNING RESUME Windows Error Recovery – Windows did not shut down FAILURE/ successfully message. To continue, select . This can Start Windows normally happen if the computer was put into Sleep mode and the battery has discharged.
Once the battery has been trickle- charged, it may begin working correctly again. If the trickle-charging does not prove effective, you can connect to Support Online by going to Toshiba support at support.toshiba.com. The battery light is blinking when the computer is If the battery light is blinking when the computer is on, this indicates a power mismatch.
If Something Goes Wrong ® The Windows operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 145
If Something Goes Wrong ® The Windows operating system is not working Reset your computer ❖ All of your personal files and apps are removed ❖ Your computer settings are changed back to their defaults For more information, see “Reset your PC” on page Advanced options Choosing this option presents you with another set of options:...
If Something Goes Wrong ® The Windows operating system is not working ❖ Enable debugging mode ® Starts Windows in an advanced troubleshooting mode ❖ Enable boot logging Creates a file that lists all the drivers that are installed during startup ❖...
❖ Click or touch one of the options listed in the window and follow the instructions You can connect to Support Online by going to Toshiba support at support.toshiba.com. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
If Something Goes Wrong Memory problems Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: From the Start screen, type Device Manager...
Page 149
If Something Goes Wrong Memory problems ® When the Windows charms appear, click or touch the ) charm. Settings In the lower right of the screen click or touch the Power ( ) icon. Shut down option Power (Sample Image) Shut down While holding the key, click or touch the Shift...
If Something Goes Wrong Power and the batteries Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries.
This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information.
Page 152
If Something Goes Wrong Display problems HINT: Pressing the key several times will advance Fn + F5 you through the display options. If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet.
If Something Goes Wrong Disk or storage drive problems ❖ Project to a second screen ❖ Adjust ClearType text Click or touch The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 1280 x 800 or higher.
Page 154
If Something Goes Wrong Disk or storage drive problems Right-click or touch the drive you wish to check. (Sample Image) Clicking on or touching the drive In the pop-up menu, click or touch Properties The drive’s Properties box appears. Click or touch the tab.
If Something Goes Wrong Optical disc drive problems Click or touch the button. Optimize The system will display the status as it optimizes and defragments the drive. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures.
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at support.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
If Something Goes Wrong ® ExpressCard problems ® ExpressCard problems (Available on certain models.) ® ExpressCards include many types of devices, such as a removable hard disk, additional memory, or a pager. ® Most ExpressCard problems occur during installation and setup of new cards.
Page 158
If Something Goes Wrong ® ExpressCard problems The computer stops working (hangs) when you ® insert an ExpressCard ® If the ExpressCard causes the system to hang, hold down the ON/OFF button until the computer shuts down (approximately 10 seconds). Restart the computer and press the key immediately after pressing the ON/OFF button.
If Something Goes Wrong Printer problems Highlight, and then click or touch the item you would like to eject. message appears. Safe To Remove Hardware Remove the device. Never swap modules when the computer is in Hibernation or Sleep mode. This is known as “warm swapping”...
If Something Goes Wrong Wireless networking problems You may have connected the printer while the computer is on. Disable Sleep mode, turn off the computer, and turn off the printer. Turn the printer back on, make sure it is online, and then turn the computer back on.
Page 161
NOTE To enable or disable wireless communication, use the For more information see “TOSHIBA Fn + F8 key. Function Keys” on page 172. ❖...
“Checking device properties” on page 148 instructions on using Device Manager to view the optical disc drive properties. Check the Toshiba Web site for new information on optical disc drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
If Something Goes Wrong Develop good computing habits The screen saver runs while you are watching a movie or title. If the screen saver is enabled, it runs on top of any movie or title you are watching. To disable the screen saver: Right-click the desktop and click in the Personalize...
If Something Goes Wrong Develop good computing habits Read the documentation. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 165
If Something Goes Wrong Develop good computing habits In the left pane, click or touch System Protection The System Protection tab of the System Properties window appears. Click or touch Configure Under select Restore settings Turn on System Protection Click or touch Click or touch Create In the input field, enter a name that is descriptive enough...
Page 166
No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 167
If Something Goes Wrong Develop good computing habits ® For additional Help, while in the Windows Desktop screen, ® press the key to launch the Windows Help and Support screen. Search for “back up files.” General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard...
Page 168
2 if no critical data has changed. USB Sleep and Charge is not working. USB Sleep and Charge may be disabled. Open the TOSHIBA Sleep and Charge utility to check if the feature is disabled and to enable it if necessary.
TOSHIBA Sleep utility or the battery may be depleted. Lower the limit in Sleep and Charge to enable charging at the current battery power level, or, if battery power is running low or is depleted, connect the AC adaptor to your computer.
If Something Goes Wrong Other Toshiba Internet Web sites Contacting Toshiba Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com.
Page 171
Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
TOSHIBA Function Keys TOSHIBA Function keys provide a quick way to modify selected system functions and to launch applications. Functions TOSHIBA Function keys are used to set or modify the following system functions: ❖ Lock (Instant security) ❖ Power Plan ❖...
Power Options window (see “Power Plans” on page 98). This TOSHIBA function key also allows you to enable notifications for power plans. The notifications are disabled by default. Sleep mode This TOSHIBA Function key places the computer into Sleep mode.
TOSHIBA Function Keys Functions Output (Display switch) This TOSHIBA Function key cycles through the display options and highlights the available options. Click, touch, or press to activate the selected ENTER option. ❖ PC screen only ❖ Duplicate ❖ Extend ❖...
TOSHIBA Function Keys Functions Display brightness This TOSHIBA Function key decreases the screen brightness. This TOSHIBA Function key increases the screen brightness. Disabling or enabling wireless devices This TOSHIBA Function key enables/disables the ® Wi-Fi antenna in your computer. NOTE Allow about 5 seconds to switch between modes.
Disabling or enabling the scroll lock This TOSHIBA Function key enables/disables the scroll lock. Volume Mute This TOSHIBA Function key enables/disables volume mute. When volume mute is enabled, no sound will come from the speakers or headphones.
TOSHIBA Function Keys Functions Keyboard Function keys This TOSHIBA Function key allows you to zoom out. This TOSHIBA Function key allows you to zoom in. This TOSHIBA Function key decreases the speaker volume. This TOSHIBA Function key increases the speaker volume.
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. Canada UL approved CSA approved United Kingdom Europe VDA approved...
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this User’s Guide. Alternating Current Basic Input/Output System BIOS Blu-ray Disc Read-Only Memory BD-ROM bits per second Compact Disc Compact Disc Read-Only Memory CD-ROM...
Page 180
Glossary Dots Per Inch Digital Versatile (or Video) Disc Digital Versatile (or Video) Disc Read-Only DVD-ROM Memory external Serial Advanced Technology eSATA Attachment File Allocation Table Federal Communications Commission gigabyte gigabytes per second GBps Hard Disk Drive High-Definition Multimedia Interface HDMI High-Definition Multimedia Interface Consumer HDMI CEC...
Page 181
Glossary Radio Frequency Interference Read-Only Memory Real-Time Clock Secure Digital Synchronous Dynamic Random Access Memory SDRAM Solid State Drive Thin Film Transistor Universal Serial Bus Uniform Resource Locator Wide Area Network World Wide Web Terms The following terms may appear in this User’s Guide. —A liquid crystal display (LCD) made active-matrix display from an array of liquid crystal cells using active-matrix...
Page 182
Glossary —A copy of a file, usually on a removable disk, kept in backup case the original file is lost or damaged. BIOS —See Basic Input/Output System (BIOS) —The speed at which a communication device, such baud rate as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily bits per second the same as bits per second).
Page 183
Glossary —A section of very fast memory in which frequently used cache information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s CPU cache, L1 cache, L2 cache main memory. See also CD-ROM —An individual compact disc.
Page 184
Glossary —A device that controls the transfer of data from a controller computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. Central Processing Unit (CPU) —See —A section of very fast memory residing between CPU cache the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute...
Page 185
Glossary —A round, flat piece of material, designed to be read from disc and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. disk Compare —A round, flat piece of material that can be magnetically disk influenced to hold information in digital form, and used in the production of magnetic disks, such as hard disks.
Page 186
Glossary —An external device that supports hot swapping and eSATA fast data transfer. Very useful in storing and transferring large files. —A computer program that is ready to run. executable file Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension.
Page 187
One A/V component can control another while using this HDMI function, if connected with HDMI cables. See also —A feature of many Toshiba computers that saves Hibernation to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off.
Page 188
Glossary —A small image displayed on the screen that represents a icon function, file, or program. —A method of refreshing a computer screen, in interlaced which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen non-interlaced image.
Page 189
Glossary —To move information from a storage device (such as a load hard disk) into memory for processing. —See local area network —A section of a disk that is recognized by the logical drive operating system as a separate disk drive. A system’s logical drives may differ from its physical drives.
Page 190
Glossary —A method of refreshing a computer screen, non-interlaced in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced —A disk for storing programs and data that non-system disk system disk cannot be used to start the computer.
Page 191
Glossary —An icon (usually an arrow) that moves on the screen pointer when you slide your finger across the touch pad or move a mouse. Used to point to and select/activate on-screen items, such as icons, menu items, and buttons. The shape and purpose of the pointer varies depending on the program you are using and what you are doing.
Page 192
Glossary —A monitor that RGB (Red, Green, Blue) monitor reproduces all colors by mixing red, green, and blue light in various combinations. —An eight-wire connector used to connect a RJ45 connector computer to a network. —Non-volatile memory that can ROM (Read-Only Memory) be read but not written to.
Page 193
Glossary ® —The symbol (in the MS-DOS operating system prompt system, generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands. active-matrix display —See TFT display —To activate items displayed on the screen, such as Touch apps, setting icons, and on-screen buttons by touching them with your finger.
Index AC adaptor 40 backing up files 79 AC power 92 Backlit keyboard 82 AC power light 40 battery accessing battery life 91 network 112 Call2Recycle™ 104 AccuPoint® care 103 primary button 68 changing 100 secondary button 68 charge indicator light 42 adding charge time 92 memory...
Page 195
Index power options 96 computer to a network 112 real-time clock (RTC) 92 external device 72 recharge time 91 HDMI™-compatible TV or removing 100 display device 73 RTC memory 92 monitor 74 running computer on battery power cord/cable 42 power 90 power source 41 safety precautions 103 cooling fan...
Page 196
Index DVDs Function Keys using 85 disabling or enabling wireless devices 175 Function keys eco power plan 99 disabling touch pad 175 eco Utility® 121 Disabling/enabling cursor eject button control overlay 176 optical disc drive 86 Disabling/enabling numeric eject, optical disc drive 86 overlay 176 enabling Disabling/enabling scroll lock...
Page 197
81 notification area 110 overlay keys 81 notifications 110 overlay to type numeric data 81 online resources LEDs Toshiba 89 system indicator lights 95 optical disc AC adaptor light 94 Auto-Run feature 87 AC power light 40 handling 87...
Page 200
Web Camera 114 using the keyboard 79 keyboard 151 using the overlay for cursor control memory problems 148 missing files/trouble accessing using the Toshiba Dual Pointing a drive 153 Device 68 on-screen eject button 156 Utilities 120 optical disc drive 155...
Page 201
Index Settings 107 Share 107 Start 107 Windows® charms 107 Windows® key 80 Windows® operating system desktop 108 troubleshooting 143 Windows® Store 110 wireless networking 111 troubleshooting 160...