4.15 Display Mask
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-33, 4-34.
1. Seat the display mask in the correct position and secure the following 20 latches, in
that order:
- Seven bottom latches
- Five latches on each of the left and right sides
- Tour top latches
2. Secure the display mask with the following 6 screws, in that order:
- Two M2.5x6 white flat head screws on the top
- Four M2.5x6 white flat head screws on bottom
3. Secure the following 6 seals to cover the screws, in that order:
- Four black seals on the bottom
- Two black seals on the top
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual
4 Replacement Procedures
4-53