Removing A Memory Module - Toshiba Satellite L20 Series User Manual
Hide thumbs
Also See for Satellite L20 Series:
- User manual (256 pages) ,
- User manual (178 pages) ,
- Maintenance manual (264 pages)
Table of Contents
Advertisement
Optional Devices
7. Push the module down so it lies flat. Latches on either side will click into
place to secure the module.
8. Seat the cover and secure it with the screws.
9. Replace the battery pack as described in Chapter 6,
Up
10. Turn the power on and make sure the added memory is recognized.
Open System in the Control Panel and click the General tab.
Removing a memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
2. Turn the computer upside down and remove the battery and the screws
securing the memory module cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Lift one side of the insulator and push the latches to the outside to
release the module. A spring will force one end of the module up.
7-6
Installing the memory module
Modes.
Slot A
Slot B
Power and Power-
User's Manual
Hide quick links:
Advertisement
Table of Contents
