Table of Contents
Advertisement
• To set another Picture Mode, use for the Picture
menu.
Activating the picture preferences
You can customise current Picture Mode settings as
desired� For example, while selecting " Dynamic ," if
you change the following items, such as Backlight ,
Contrast , Brightness , Colour , Tint , Sharpness
and the Advanced Picture Settings items, your new
setting are saved for " Dynamic " Picture Mode �
1
From the Picture menu, press s or r to select
either Backlight , Contrast , Brightness , Colour ,
Tint or Sharpness �
2
Press v or w to adjust the settings�
Note:
Contrast is not available when Picture Mode is set
to AutoView.
Resetting the Picture Mode
This feature resets all picture settings to the factory
settings Picture Mode �
1
From the Picture menu, press s or r to select
Reset and press OK �
2
A confirmation message will appear. Press v or w to
select Yes and press OK �
Adjusting Black/White Level
Black/White Level improves the contrast of the picture�
1
From the Picture menu, press s or r until
Advanced Picture Settings is selected�
Picture
Reset
PICTURE
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced Picture Settings
2
Press OK and press s or r to select Black/White
Level �
Advanced Picture Settings
3D Colour Management
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
3
Press v or w to adjust the settings as required�
24
Using the TV's features (General)
0
70
100
0
0
0
0
Off
100
Middle
7
0
Using ClearFrame 100Hz
This function eliminates motion blur without adding
flicker or reducing image brightness and improves the
viewing quality of a motion picture�
1
From the Advanced Picture Settings menu, press
s or r until ClearFrame 100Hz is selected�
2
Press v or w to select Smooth , Standard or Off �
Adjusting the Colour Temperature
Colour Temperature increases the 'warmth' or
'coolness' of the picture by increasing the red or blue tint�
1
From the Advanced Picture Settings menu, press
s or r to select Colour Temperature �
2
Press v or w to adjust the settings as desired (0 (warm)
- 10 (cool))�
Note:
If Picture Mode is set to AutoView, the range will
be -5 to +5.
Adjusting the Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it
will automatically optimise the backlighting levels to suit
ambient light conditions�
1
From the Advanced Picture Settings menu, press
s to select Auto Brightness Sensor Settings
and press OK �
2
Press v or w to select On and press OK �
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
3
Press s to select Backlight Adjustment Pro and
press OK �
4
The Backlight Adjustment Pro window will appear�
Press OK again to display the adjustment window�
5
Press v or w to select a point and press s or r to
adjust the level�
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
6
Press OK to confirm the adjustment.
To cancel the adjustment when selecting a point, select
Cancel and press OK �
On
48
Cancel
Reset
Ambient Light
- Quick Links:
- Back Connections
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
