Replacing The Battery Pack - Toshiba A5 User Manual
Notebook pc
Hide thumbs
Also See for A5:
- Maintenance manual (255 pages) ,
- Specification (2 pages) ,
- Frequently asked questions (1 page)
Table of Contents
Advertisement
Retaining data with power off (standby mode)
When you turn off your computer with fully charged batteries, the batteries
retain data/charge for the following approximate time periods:
Battery
RTC battery
Extending battery life
To maximize the life of your battery pack:
■
If you have extra battery packs, rotate their use.
■
If you will not be using the system for an extended period, remove the
battery pack.
■
Store spare battery packs in a cool dry place out of direct sunlight.
Replacing the battery pack
When the battery pack reaches the end of its operating life you will need to
install a new one. If the Battery indicator flashes amber shortly after the
battery has been fully recharged, the battery pack needs to be replaced.
You might also replace a discharged battery pack with a charged spare when
you are operating your computer away from an AC power source. This
section explains how to remove and install the battery pack.
Removing the battery pack
To replace a discharged battery pack, follow the steps below.
■
When handling battery packs, be careful not to short circuit the
terminals. Also do not drop, hit or otherwise apply impact; do not scratch
or break the casing and do not twist or bend the battery pack.
■
Do not remove the battery pack while the computer is in Standby Mode
as data in memory will be lost.
1. Save your work.
2. Turn the computer's power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down.
TOSHIBA A5
Approximately 2 days (Standby mode, 12-cell)
Approximately 1 days (Standby mode, 6-cell)
Approximately 1 month (Shut down mode, both)
Approximately 1 month
Power and Power-Up Modes
6-10
Advertisement
Table of Contents
