Tv Output Signal; Monitor - Toshiba Satellite Pro M10 User Manual
Hide thumbs
Also See for Satellite Pro M10:
- Maintenance manual (460 pages) ,
- User manual (273 pages) ,
- Replacement manual (24 pages)
Table of Contents
Advertisement
TV output signal
Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Monitor
Refer also to Chapter 8, Optional Devices, and to your monitor's
documentation.
Problem
Monitor does not turn
on
No display
Display error occurs
Satellite Pro M10 Series
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard.
If problems persist, contact your dealer.
Procedure
Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Troubleshooting
9-19
Advertisement
Table of Contents
