Table of Contents
Advertisement
Sound system
Refer also to Chapter 7, Setup and Password Security.
Problem
No sound is heard
USB
Refer also to your USB device's documentation.
Problem
USB device does not
work
User's Manual
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows 98 Device Manager. Make sure
the sound function is enabled and that settings
for I/O address, Interrupt level and DMA are
correct for your software and do not conflict with
other hardware devices that you may have
connected to the computer.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows 98 documentation
for information on checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB Legacy Emulation item
in Hardware Setup or TSETUP is set to
Enabled.
This feature works only for mouse and keyboard.
Also, the mouse and keyboard must be
connected, before you boot the computer.
If problems persist, contact your dealer.
Troubleshooting 9-13
Hide quick links:
Advertisement
Table of Contents
