Table of Contents
Advertisement
Diskette drive
For more information, refer to Chapter 4, Operating Basics.
Problem
Some programs run
correctly, but others do
not
You cannot access the
diskette drive
Printer
Refer also to the Parallel printer section in Chapter 8, Optional devices,
and to the troubleshooting and other relevant sections in your printer and
software documentation.
Problem
Printer does not turn on. Check that the printer is connected to an electric
Computer/printer do not
communicate
Printer error
9-10 Troubleshooting
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Try another disk. If you can access this disk, the
original disk (not the disk drive) is probably
causing the problem.
If problems persist, contact your dealer.
Procedure
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port and
a serial printer to the serial port. Make sure the
ports are configured correctly.
Make sure your software is configured to
recognise the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
User's Manual
Hide quick links:
Advertisement
Table of Contents
