Table of Contents
Advertisement
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
The Resume feature can be used with an external monitor. Simply enable
Resume and the computer will maintain the data as it is displayed on the
external monitor.
Turn the computer off.
1.
Connect the monitor to the external monitor port.
2.
Turn the monitor's power on.
3.
Turn the computer on.
4.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is colour or monochrome.
You can use the Hardware Setup or TSETUP program to select between
Auto-Selected and Simultaneous displays. Refer to Chapter 1,
Introduction, for directions on starting Hardware Setup or to Chapter 7,
Setup and Password
If you have selected Simultaneous under the Display options of the
Hardware Setup or TSETUP program, both the external monitor and the
internal LCD will be active when you turn on the computer. If Auto-
Selected is selected, only the external monitor will be active.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 5,
on using hot keys to change the display setting.
User's Manual
Security, for details on TSETUP.
The
Keyboard, for details
Optional Devices 8-33
- Quick Links:
- Features
Hide quick links:
Advertisement
Table of Contents
