Table of Contents
Advertisement
Installing memory module
Follow the steps below to install a memory module.
Set the computer to boot mode and turn off the power.
1.
Do not try to install a memory module with the computer turned on. You
can damage the computer and the device.
Remove all cables connected to the computer.
2.
Turn the computer upside down and remove the battery (refer to
3.
Chapter 6,
Remove two screws securing the memory module socket cover.
4.
Slide your fingernail or a thin object under the cover and lift it off.
5.
Fit the module's connectors into the computer's connectors at about a
6.
45 degree angle and press the module carefully to ensure a firm
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
User's Manual
Power and Power-Up
Removing the memory module socket cover
Modes).
Optional Devices 8-5
- Quick Links:
- Features
Hide quick links:
Advertisement
Table of Contents
