Notes
When you use the following functions, the AF range finder frame is disabled and appears in a dotted line. In this case,
●
the camera works to focus on the subjects at the center of the screen.
Zoom functions other than optical zoom
●
AF illuminator
●
When the focus mode is set to other than [Multi AF], you cannot use the Face Detection function.
●
If Tracking focus is activated, the camera focuses with priority on the subject to be tracked.
●
Using Flexible Spot AF
This is useful when you shoot using a tripod and the subject not in the center of the frame.
A: AF range finder frame (yellow: adjustable/white: fixed)
1. Use the control wheel to adjust the position of the AF range finder frame where you want to focus, then press
To reset the setting, press
Note
Once you change the focus method, the AF range finder frame you set up is cleared.
●
Using Semi Manual/Manual Focus
This is useful when it is difficult to get the proper focus, such as shooting images through a window.
A: Manual Focus bar
Focus range 1 cm (13/32 inches) to
1. Use the control wheel to set the desired focus distance on the manual focus bar, then press
To correct the setting, press
the control wheel to make rough adjustments.
Notes
If the focus distance is set very close, the image may show dust or fingerprints on the lens. Wipe the lens with a soft
●
cloth, etc.
The focus distance range is limited according to the zoom scaling.
●
Once you change the focus method, the distance of the Manual Focus you set up is cleared.
●
Related Topic
Tracking focus
115
again.
(W), 1 m 70 cm (5 ft 7 inches) to
again. Use
/
/
/
on the control wheel to set the position. You can turn
(T)
.
.