Table of Contents
Advertisement
Advanced Playback Operations
Locating a Track (Multi-AMS/
Auto Play/Memory Play)
You can locate the following
/ previous tracks (Multi-
AMS: Automatic Music Sensor) or the beginning of a
tape quickly. You can even locate a specific point
anywhere on a tape.
RESET
MEMORY
To locate
Press
the beginning of the next
PP as many times as you
or succeeding tracks
want while playing.
(Multi-AMS*)
For example, to locate 2 tracks
ahead, press twice.
the beginning of the
current track (Multi-AMS*)
#4 once while playing
the beginning of the
<4 as many times as you
preceding tracks
want while playing.
(Multi-AMS"*)
For example, to locate 2 tracks
behind, press three times.
the beginning of a tape
MEMORY repeatedly until
(Auto Play)
"MEMORY" disappears in the
display. Then press <4
while holding down >.
MEMORY repeatedly until
"MEMORY"
appears in the
display. Find the point you
.
want, and press RESET to
reset the tape counter and to
memorize the point.
To locate the memorized
point, press 4 while
holding down C>. (Press
only to stop at "0.00.")
a particular point on a
tape (Memory Play)
* You can use the Multi-AMS to locate up to the 30th track
after or before the current track.
What happens during Multi-AMS operation
When Multi-AMS
is operating, "PLAY"
appears.
And each
time the deck detects a blank space, the indicated number
decreases by one. After locating the beginning of the
specified track, the counter indication appears again and the
deck starts playing the track.
4: Beginning
of track
=
rit
fan
Previous
Current
Next
track
track
track
Notes
* The Multi-AMS function may not work correctly if:
— the blank space between tracks is less than 4 seconds
long.
— the signal strength of the left and right channels are
verv different.
— there is a passage of low frequencies or very low
volume within a track.
Since the counter is not a digital clock, it will differ from
the actual elapsed playback or recording time
Advertisement
Table of Contents
