Preparation before recording
1 Install the video camera recorder on the camera mount.
2 Preset the video camera recorder.
1 instal an NP-77 (or NP-55) battery pack
(optional) to the video camera recorder. (Refer to
the instruction manual of the video camera recorder.)
2 Install the specific pedestal on the video
rr.
Bottom
Pedestal
Turn the screw with a coin, etc.
3 Install the video camera recorder on the
camera mount.
Tum the screw with a coin, etc.
WHT YOU WOU @ VUUTTUUPUTIE NiIdeO Camnen
recorder
Remove the lens cover before installing the video camera
recorder on the camera mount.
4 Remove the lens hood of the video camera
recorder and install the wide conversion lens.
¢ Remove a lens cap from the video camera recorder.
© Remove a filter, such as a protector, if it is in use.
¢ By installing the wide conversion lens, the shooting
coverage becomes wider, although the subject is
shot smaller at 60 percent.
Wide conversion
lens
5 connect both microphone and remote contro!
cords to the video camera recorder.
to remote control terminal
to microphone terminal
Remote control
connecting cord with
stereo mini-mini plug (supptied)
Remote control cord
When you us8 CCD-VSICCD-V90E video camera
recorder
Use the remote control connecting cord with a 5-pin plug.
Set power switch to CAMERA.
Set zoom lever to WIDE.
Set shutter speed at 1/60 seconds
(normal speed).
1 Set the AUTO LOCK switch to
RELEASE, and press the FOCUS
button (manual focus mode).
2 Set focus ring at oo.
| Tito
balance
Normally
OUTDOOR
Night diving
iNDOOR
When you use CCD-V9/CCD-V90E video
camera recorder
3 Install the video camera recorder in the front body.
The transport cover should be removed.
1 insert the video camera recorder
along the rail
until it clicks.
3 Press up the STANDBY switch of the video
camera recorder.
4 Make sure that the REC indicator lights up
when the power switch of the marine pack is
set to ON and the REC STARTI/STOP lever is
pressed In the direction of the arrow.
STANDBY switch
2 Push the lock lever in the direction of the
Power switch
REC indicator
REC STARTI/STOP lever