Table of Contents
Advertisement
Step
Component
4
Exchange of
electric parts
(Continued)
Procedure
14) Remove the screws of HEATSINK from
ASM-PCB(CDB) (Screws:M3x14, 2pcs.)
(Fig. 4-11) and (Fig. 4-12)
2. Attachment
1) Install it in the reverse of the procedure
to remove it.
2) Apply heat silicones to E-parts.
(Fig. 4-13)
Note: Mounting torque of Screw:M3 is
0.59~0.78 N·m.
15) Remove the screws from the
ASM-S-COVER-NF(Screws:M4x8, 3pcs.)
(Fig. 4-14) and (Fig. 4-15)
16) Remove the faston connectors from the
main terminal, cut binding band and
remove CLAMP-FILTER(Fig. 4-16)
17) Remove the all connectors from the
ASM-PCB(NF) (Fig. 4-17)
18) Remove the screw (Screw:M4x8, 1pc.)
and remove ASM-PCB(NF) of support
spacers 4 positions (Fig. 4-17)
19) ASM-PCB(NF) (Fig. 4-18)
2.1. Attachment
1) Install it in the reverse of the procedure
to remove it.
- 102 -
Remark
Screws M3
(Fig. 4-13)
(Fig. 4-14)
Screws
(Fig. 4-15)
binding band
Faston
connectors
(Fig. 4-16)
Connectors
(Fig. 4-17)
Connectors
Screw
Spacers
(Fig. 4-18)
(Fig. 4-12)
Heat
Silicones
WP-507
Screw
Spacers
WP-512
Advertisement
Table of Contents
Troubleshooting
