hit counter script
Sony HCD-GN1300D Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-GN1300D
  6. Service manual

Sony HCD-GN1300D Service Manual

Dvd deck receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver. 1.3 2011.07
• HCD-GN1300D is the Amplifier,
DVD player, tape deck and tuner
section in MHC-GN1300D.
Amplifi er section
The following are measured at AC 120, 127,
220, 240V 50/60 Hz
Power output (rated): 130 W + 130 W (6 Ω, 1 kHz, 1% THD)
RMS output power (reference)
Front speaker:
215 W + 215 W (per channel at 6 Ω,
1 kHz, 10% THD)
Center speaker:
85 W
(per channel at 6 Ω, 1 kHz, 10% THD)
Surround speaker:
90 W + 90 W
(per channel at 6 Ω, 1 kHz, 10% THD)
Subwoofer:
210 W (per channel at 8 Ω, 100 Hz, 10% THD)
Inputs
VIDEO IN:
VIDEO: 1 Vp-p, 75 ohms
AUDIO L/R: Voltage 250 mV,
impedance 47 kilohms
TV/SAT AUDIO IN L/R:
Voltage 250 mV/450 mV, impedance 47 kilohms
MIC 1 or 2:
Sensitivity 1 mV, impedance 10 kilohms
(USB) port:
Type A
Outputs
AUDIO OUT L/R:
Voltage 250 mV, impedance 1 kilohm
VIDEO OUT:
Max. output level 1 Vp-p, unbalanced,
Sync. negative load impedance 75 ohms
9-890-528-04
Sony Corporation
2011G08-1
©
2011.07
Published by Sony EMCS (Malaysia) PG Tec
HCD-GN1300D
Model Name Using Similar Mechanism
DVD
DVD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism
TAPE
Section
Tape Transport Mechanism Type
SPECIFICATIONS
COMPONENT VIDEO OUT:
S VIDEO OUT:
PHONES:
USB section
Supported bit rate
Sampling frequencies
Transfer speed
Supported USB device
Maximum current
E Model
HCD-GN1200D
CDM74HFV-DVBU101
KHM-313CAB/C2NP
HCD-AZ55D
CRP42603
Y: 1 Vp-p, 75 ohms
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
Y: 1 Vp-p, unbalanced, Sync. negative
C: 0.286 Vp-p, load impedance 75 ohms
accepts headphones of 8 ohms or more
MP3 (MPEG 1 Audio Layer 3):
32 – 320 kbps
WMA: 48 – 192 kbps
AAC: 48 – 320 kbps
MP3 (MPEG 1 Audio Layer 3):
32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Full-Speed
Mass Storage Class
500 mA
– Continued on next page –
DVD DECK RECEIVER

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-GN1300D

Summary of Contents for Sony HCD-GN1300D

  • Page 1 Voltage 250 mV, impedance 1 kilohm – Continued on next page – VIDEO OUT: Max. output level 1 Vp-p, unbalanced, Sync. negative load impedance 75 ohms DVD DECK RECEIVER 9-890-528-04 Sony Corporation 2011G08-1 © 2011.07 Published by Sony EMCS (Malaysia) PG Tec...
  • Page 2 TV screen. Although this is not a Other models: 531 – 1,602 kHz (with the interval set at 9 kHz) malfunction and for Sony service use only, 530 – 1,610 kHz (with the interval set at 10 kHz) normal system operation will not be possible.

  • Page 3: Table Of Contents

    HCD-GN1300D TABLE OF CONTENTS SERVICING NOTES DIAGRAMS ..........6-1. Block Diagram – RF Section – ........25 DISASSEMBLY 6-2. Block Diagram – Video Section – ........26 6-3. Block Diagram – Tape/Tuner Section – ......27 2-1. Case (TOP) Assy .............

  • Page 4: Servicing Notes

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 5: Disassembly

    HCD-GN1300D SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. CASE (TOP) ASSY (Page 6) 2-2. TAPE MECHANISM DECK 2-3. LOADING PANEL KARAOKE SCORING BOARD (Page 7) (Page 6) 2-4. FRONT PANEL SECTION (Page 7) 2-5.

  • Page 6: Case (Top) Assy

    HCD-GN1300D Ver. 1.3 Note: Follow the disassembly procedure in the numerical order shown below. 2-1. CASE (TOP) ASSY 9 two screws 6 two screws (+BVTP 3 x 8) (+BVTT 3 x 6) qf case, top 8 panel (side-L) CN103 (6P)

  • Page 7: Loading Panel

    HCD-GN1300D Ver. 1.3 2-3. LOADING PANEL 3 loading panel CD mechanism deck (CDM74KF) 1 Turn the gear to the direction of the arrow. chassis side gear By using (-) screw driver 2 Pull-out the disc tray. 2-4. FRONT PANEL SECTION...

  • Page 8: Mic Board, Usb Dvd Board, Mic Vr Board, Heaphone Board

    HCD-GN1300D Ver. 1.3 2-5. MIC BOARD, USB DVD BOARD, MIC VR BOARD, HEADPHONE BOARD qf USB DVD board qd two screws (+BVTP 2.6 (3CR)) qs two screws ground plate (USB) (+BVTP 2.6 (3CR)) q; one screw (+BVTP 2.6 (3CR)) qa HP board 6 two screws (+BVTP 2.6 (3CR))

  • Page 9: Tuner Pack

    HCD-GN1300D Ver. 1.3 2-7. TUNER PACK 2 wire (flat type) (5 core) (CN1) 3 tuner (FM/AM) 1 two screws (+BVTT 3 x 6) 2-8. SUBTRANS BOARD 6 bracket (subtrans) 2 CN1203 (4P) 3 CN1200 (2P) 4 CN1201 (4P) 7 SUBTRANS board...

  • Page 10: Dc Fan, Power Transformer (T1200)

    HCD-GN1300D Ver. 1.3 2-9. DC FAN, POWER TRANSFORMER (T1200) 1 four screws (+BV SUMITITE S 4x8 ROUND) 0 cushion, PT 3 TRANS board 2 CN1250 (13P) 4 power transformer (PT1201) 8 two screws (+BVTP 3 x 10) 5 two screws...

  • Page 11: Front Board, Surround Board

    HCD-GN1300D Ver. 1.3 2-11. FRONT BOARD, SURROUND BOARD 1 two screw (+BVTP 3 x 8) 2 two screws (transistor) 3 FRONT board q; bracket (PWB) 8 heat sink assy 5 two screws (+BVTP 3 x 8) 4 two screws (+BVTP 3 x 8)

  • Page 12: Cd Block Section, Video Board

    HCD-GN1300D Ver. 1.3 2-13. CD BLOCK SECTION, VIDEO BOARD 3 bracket (Trans) 1 three screws (+BVTP 3 x 8) one screw (+BVTP 3 x 10) Cover, CDM Assy two screws FFC SUPPORT board +PTPWH 2.6 x 12 (DIA 7.5) one screw...

  • Page 13: Driver Board, Sw Board

    HCD-GN1300D Ver. 1.3 2-15. DRIVER BOARD, SW BOARD 1 two screws (BTTP (M2.6)) 2 CN703 (4P) 5 DRIVER board 6 one screw (BTTP (M2.6)) 7 SW board 3 CN704 (2P) 4 wire (flat type) (5 core) (CN702) 2-16. OPTICAL PICK-UP 1 floating screw (+PTPWH M2.6)

  • Page 14: Sensor Board

    HCD-GN1300D Ver. 1.3 2-17. SENSOR BOARD 1 floating screw (+PTPWH M2.6) 2 tray 8 screw (+BTTP (M2.6)) 3 belt (table) 0 SENSOR board 4 floating screw (+PTPWH M2.6) 5 pulley (table) 6 floating screw 9 CN731 (+PTPWH M2.6) (3P) 7 gear (geneva) 2-18.

  • Page 15: Motor (Ld) Board

    HCD-GN1300D Ver. 1.3 2-19. MOTOR (LD) BOARD 3 two screws (+BTTP (M2.6)) 2 Remove the two solderings of motor. 5 MOTOR (LD) board 4 loading motor assy (M751) 1 belt (loading)

  • Page 16: Test Mode

    HCD-GN1300D SECTION 3 TEST MODE 2. Press [EQ BAND/MEMORY] button repeatedly until a mes- [GC TEST MODE] sage “GEQ MIN” appears on the fl uorescent indicator tube. • This mode is used to check the fl uorescent indicator tube, GEQ decreases to its minimum.
  • Page 17 HCD-GN1300D [TUNER STEP CHANGE] [TV/SAT SWITCHING] • The step interval of AM channels can be toggled between 9 • This mode let you switch from TV to SAT and vice-versa. KHz and 10 KHz. This mode is not available for Saudi Arabian models.
  • Page 18 HCD-GN1300D 3. Press [POWER] button again to turn the set OFF. 2. Select “3. Manual Adjustment” by pressing the [3] button on 4. Press [PAUSE] button and [POWER] button simultaneously. the remote commander. The following screen appears on the The system will turn on automatically. The message “COLOR on-screen display.
  • Page 19 HCD-GN1300D b. Parameter of error code [Check Emergency History] This is the detail of error code. To check the emergency history, please follow the following procedure. Example of Error code 1. From the Top Menu of Remocon Diagnosis Menu, select “3.
  • Page 20 HCD-GN1300D To return to the Top Menu of Remocon Diagnosis Menu Press [0] button on the remote commander. [Check Version Information] To check the version information, please follow the following procedure. 1. From the Top Menu of Remocon Diagnosis Menu, select “4.

  • Page 21: Mechanical Adjustments

    HCD-GN1300D SECTION 4 MECHANICAL ADJUSTMENTS Precaution 1. Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers 2. Demagnetize the record/playback head with a head demagne- tizer. 3. Do not use a magnetized screwdriver for the adjustments.

  • Page 22: Electrical Adjustments

    HCD-GN1300D SECTION 5 ELECTRICAL ADJUSTMENTS TUNER SECTION DECK SECTION 0 dB=0.775V 1. Demagnetize the record/playback head with a head demagne- [FM Tune Level Check] tizer. FM signal generator 2. Do not use a magnetized screwdriver for the adjustments. 3. After the adjustments, apply suitable locking compound to the parts adjusted.
  • Page 23 HCD-GN1300D 3. Mode: Playback DVD SECTION Audio Out Jack test tape [TEST DISC LIST] at Back Panel P-4-A100 oscilloscope Use the following test disc on test mode. (10 kHz, –10 dB) White-L-CH • CD: YEDS-18 (PART No. 3-702-101-01) L-CH Red-R-CH PATD-012 (PART No.
  • Page 24 HCD-GN1300D Checking Location: DMB18 board (Side A) DMB18 BOARD (SIDE A) IC104 IC102 IC101 IC201 CN109 CN105 CN105 pin (GND) CN105 pin (RFMON)

  • Page 25: Diagrams

    HCD-GN1300D SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – RF Section – ASDATA0 SDTI1 DVDRFIP LOUT4+ SDTI2 ASDATA1 SDTI3 ROUT4+ ASDATA2 R-CH DVDA SDTI4 ASDATA3 DVDB DETECTOR DVDC DVDD ACLK MCLK LOUT1+ ABCK BICK LRCK ROUT1+ ALRCK R-CH xSYSRST RSTB MAIN...

  • Page 26: Block Diagram - Video Section

    HCD-GN1300D 6-2. BLOCK DIAGRAM – VIDEO Section – J1000 VIDEO (1/2) VIDEO INPUT IC1700 VIDEO AMP, 75 OHM DRIVER Signal Path J1702 : VIDEO YOUT COUT S VIDEO : CHROMA IC1701 VIDEO SELECT : COMPONENT VIDEO RGB_SEL/DSEL : R, G, B...

  • Page 27: Block Diagram - Tape/Tuner Section

    HCD-GN1300D 6-3. BLOCK DIAGRAM – TAPE/TUNER Section – IC601 MAIN SECTION TAPE-L OP AMP (Page 28) Q602 DECK L - CH Q605, Q606 REC/PB HEAD Q601 R - CH R-CH Q609 IC600 MAIN SECTION OP AMP TAPEREC-L R-CH MUTE (Page 28)

  • Page 28: Block Diagram - Main Section

    HCD-GN1300D 6-4. BLOCK DIAGRAM – MAIN Section – IC101 INPUT SELECT SWITCH, GRAPHIC EQUALIZER CONTROL, ELECTRICAL VOLUME RF/SERVO RECAR R-CH SECTION RECAL (Page 25) L-IN J1000(2/2) 40 VIDEO-L BB1R VIDEO Q178 SWITCH R-CH BB2R IC1000 (1/2) IC1000 (2/2) REFOUT Q128...

  • Page 29: Block Diagram - Amp Section

    HCD-GN1300D 6-5. BLOCK DIAGRAM – AMP Section – J1005 MAIN HEADPHONE D104 SECTION IC1302 DBFB F/B (Page 28) POWER AMP RY1301 MAIN SECTION FL-IN (Page 28) JK1301 FRONT SPEAKER FR-IN M892 DC FRONT FAN Q1303,1308 Q1512 Q1511 Q1509,1513 OVERLOAD DISPLAY/POWER...

  • Page 30: Block Diagram - Display/Power Section

    HCD-GN1300D 6-6. BLOCK DIAGRAM – DISPLAY/POWER Section – IC901 D900 LED SWITCH Q900 CONTROLLER LED +9V SWITCH D1047 D901 D1048 STBY LED EVER 3.3V TP1201 2 LED DRIVER-DATA Q500,501 POWER D923-928 AD_WATCH TRANSFORMER LED DRIVER-CLOCK SWITCH F1261 LED DRIVER-LATCH D1314...
  • Page 31 HCD-GN1300D For Printed Wiring Boards. For Schematic Diagrams. Note: Note: • All capacitors are in F unless otherwise noted. (p: pF) • X : Parts extracted from the component side. • : Pattern from the side which enables seeing. 50 V or less are not indicated except for electrolytics and (The other layers' patterns are not indicated.)
  • Page 32 HCD-GN1300D • Waveforms – DMB18 Board – – VIDEO Board – – MAIN Board – IC100 IC4602 MCLK IC102 XC OUT IC1700 IC1700 CRIN IC1700 CVBSOUT 1.7 Vp-p 0.8 Vp-p 4.0 Vp-p 0.1 Vp-p 1.0 Vp-p 2.6 Vp-p 41 nsec...
  • Page 33 HCD-GN1300D • Circuit Boards Location MOTOR DRIVE board (Included in METER DISPLAY ASSY) LED(GTH) board (Included in METER DISPLAY ASSY) SW (Meter) board (Included in METER DISPLAY ASSY) DISPLAY board STR board MAIN board CD SW board HP board MIC DVD board...

  • Page 34: Printed Wiring Board - Dmb18 Board

    HCD-GN1300D Ver. 1.3 6-7. PRINTED WIRING BOARD – DMB18 BOARD – • Refer to page 33 for Circuit Boards Location. : Uses unleaded solder. DMB18 BOARD (SIDE A) DMB18 BOARD (SIDE B) MAIN BOARD CN130 (Page 48) CN304 L3602 C308...

  • Page 35: Schematic Diagram - Dmb18 Board (1/5)

    HCD-GN1300D 6-8. SCHEMATIC DIAGRAM – DMB18 BOARD (1/5) – • Refer to page 25 for Block Diagrams. • Refer to page 32 for Waveforms. • Refer to page 67 for IC Block Diagrams. DMB 18 BOARD (1/5) DMB18 CN303 JL4715...

  • Page 36: 6-9. Schematic Diagram - Dmb18 Board (2/5)

    HCD-GN1300D 6-9. SCHEMATIC DIAGRAM – DMB18 BOARD (2/5) – • Refer to page 25 for Block Diagrams. • Refer to page 67 for IC Block Diagrams. DMB 18 BOARD (2/5) IC110 R1134 VDD18 +1.8V REG C187 C198 IC110 C183 R1178 MM1661JTRE 0.33...

  • Page 37: Schematic Diagram - Dmb18 Board (3/5)

    HCD-GN1300D 6-10. SCHEMATIC DIAGRAM – DMB18 BOARD (3/5) – • Refer to page 25 for Block Diagrams. • Refer to page 32 for Waveforms. DMB 18 BOARD (3/5) DMB18 BOARD (4/5) (Page 38) R132 100k USB_OCD USB_OCD USB_SW C1161 USB_SW...

  • Page 38: 6-11. Schematic Diagram - Dmb18 Board (4/5)

    HCD-GN1300D Ver. 1.3 6-11. SCHEMATIC DIAGRAM – DMB18 BOARD (4/5) – • Refer to page 25 for Block Diagrams DMB18 DMB18 BOARD DMB18 BOARD (5/5) BOARD (3/5) (Page 39) (3/5) (Page 37) (Page 37) DMB 18 BOARD (4/5) FB111 R1150 3.3k...

  • Page 39: 6-12. Schematic Diagram - Dmb18 Board (5/5)

    HCD-GN1300D 6-12. SCHEMATIC DIAGRAM – DMB18 BOARD (5/5) – • Refer to page 25 for Block Diagrams DMB 18 BOARD (5/5) DMB18 BOARD (2/5) SW+5V (Page 36) IOPMON R225 R223 100k 100k VREFO C211 0.033 DMB18 C212 0.01 BOARD SW+3.3V...

  • Page 40: Printed Wiring Boards - Display Board

    HCD-GN1300D 6-13. PRINTED WIRING BOARD – DISPLAY BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. DISPLAY BOARD R900 R901 D900 S901 REC TO TAPE D901 R902 R907 POWER S904 S900 REC TIMER ND900 IC900...

  • Page 41: Schematic Diagram - Display Board

    HCD-GN1300D Ver. 1.3 6-14. SCHEMATIC DIAGRAM – DISPLAY BOARD – • Refer to page 25 for Block Diagrams. DISPLAY BOARD ND900 FLUORESCENT INDICATOR TUBE 6 7 8 9 10 11 12 13 14 40 41 42 43 44 45 46 47 48 R996 3.3k...

  • Page 42: Printed Wiring Boards - Dvd Mic And Mic Dvd Vr Board

    HCD-GN1300D 6-15. PRINTED WIRING BOARD – DVD MIC and MIC DVD VR BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. DVD MIC VR BOARD MIC 1 LEVEL MIC 2 LEVEL RV1100 TP1134 RV1101 TP1130...

  • Page 43: Schematic Diagram - Dvd Mic And Mic Dvd Vr Board

    HCD-GN1300D 6-16. SCHEMATIC DIAGRAM – DVD MIC and MIC DVD VR BOARD – • Refer to page 25 for Block Diagrams. • Refer to page 67 for IC Block Diagrams. MIC DVD BOARD J1000 NO1016 CONNECTOR BOARD TP1003 VIDEO VIDEO-SIGNAL...

  • Page 44: Printed Wiring Boards - Front Board

    HCD-GN1300D 6-17. PRINTED WIRING BOARD – FRONT BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. FRONT BOARD MAIN BOARD MAIN BOARD CN190 CN110 (Page 48) (Page 48) (CHASSIS) RY1301 CN1303 CN1302 JW1390 D1315 JW1393...

  • Page 45: Schematic Diagram - Front Board

    HCD-GN1300D 6-18. SCHEMATIC DIAGRAM – FRONT BOARD – • See page 25 for Block Diagrams FRONT BOARD IC1302 IC1302 STK412-240M-E POWER AMP 58.3 40.6 25.2 -25.3 -40.5 -58.2 -56.7 57.2 -0.2 -0.2 -55.4 -0.2 -0.2 CL1358 C1318 C1322 CL1359 220p...

  • Page 46: Printed Wiring Boards - Karaoke Scoring Board

    HCD-GN1300D 6-19. PRINTED WIRING BOARD – KARAOKE SCORING BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. KARAOKE SCORING BOARD MAIN BOARD CN103 (Page 48) 1-869-677- (11) HCD-GN1300D...

  • Page 47: Schematic Diagram - Karaoke Scoring Board

    HCD-GN1300D 6-20. SCHEMATIC DIAGRAM – KARAOKE SCORING BOARD – • Refer to page 25 for Block Diagrams. • Refer to page 67 for IC Block Diagrams. KARAOKE SCORING BOARD IC2002 IC B/D IC B/D IC2001 MAIN BOARD (1/5) IC2000 CN103...

  • Page 48: Printed Wiring Board - Main Board

    HCD-GN1300D 6-21. PRINTED WIRING BOARD – MAIN BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. MAIN BOARD KARAOKE SCORING BOARD FRONT BOARD FM 75 TU901 CN110 CN2000 COAXIAL FM/AM CN1302 ANTENNA TAPE TAPE (Page 46)

  • Page 49: Schematic Diagram - Main Board (1/5)

    HCD-GN1300D 6-22. SCHEMATIC DIAGRAM – MAIN BOARD (1/5) – • Refer to page 25 for Block Diagrams. • Refer to page 67 for IC Block Diagrams. MAIN BOARD (1/5) MAIN BOARD (2/5),(3/5),(4/5) R114 (Page 50,51,52) ST-L JW020 CN160 ANTENNA R116...

  • Page 50: Schematic Diagram - Main Board (2/5)

    HCD-GN1300D 6-23. SCHEMATIC DIAGRAM – MAIN BOARD (2/5) – • Refer to page 25 for Block Diagrams. MAIN BOARD MAIN BOARD (2/5) (3/5),(4/5),(5/5) (Page 51,52,53) MAIN BOARD Q510 2SC3052EF-T1-LEF (1/5),(3/5),(4/5),(5/5) SWITCH REC-R (Page 49,51,52,53) CN151 REC-L PB-L C601 C600 REC-F...

  • Page 51: Schematic Diagram - Main Board (3/5)

    HCD-GN1300D Ver. 1.3 6-24. SCHEMATIC DIAGRAM – MAIN BOARD (3/5) – • Refer to page 25 for Block Diagrams. • Refer to page 67 for IC Block Diagrams. MAIN BOARD (3/5) FAN HIGH SPEED MAIN BOARD D+3.3V (2/5) HP_R HP_R...

  • Page 52: Schematic Diagram - Main Board (4/5)

    HCD-GN1300D 6-25. SCHEMATIC DIAGRAM – MAIN BOARD (4/5) – • Refer to page 25 for Block Diagrams. MAIN BOARD MAIN BOARD (4/5) (2/5),(3/5),(5/5) (Page 50,51,53) MAIN BOARD MAIN (5/5) BOARD D633 (Page 53) MA2J1110GLS0 (1/5),(2/5),(3/5),(5/5) (Page 49,50,51,53) NO100 SUBTRANS AC-CUT DET...

  • Page 53: Schematic Diagram - Main Board (5/5)

    HCD-GN1300D 6-26. SCHEMATIC DIAGRAM – MAIN BOARD (5/5) – • Refer to page 25 for Block Diagrams. • See page 32 for Waveforms. MAIN BOARD (5/5) Q509 2SC3052EF-T1-LEF METER LED WHITE MAIN R509 BOARD (2/5),(3/5),(4/5) MAIN Q504 D505 KTA1271Y-AT MA2J1110GLS0...

  • Page 54: Printed Wiring Board - Str And Cd Sw Board

    HCD-GN1300D 6-27. PRINTED WIRING BOARD – STR and CD SW BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. CD SW BOARD 1-878-542 (12) OPEN/CLOSE DISC 3 DISC 2 DISC 1 EX-CHANGE/DISC SKIP R994 S954...

  • Page 55: Schematic Diagram - Str And Cd Sw Board

    HCD-GN1300D Ver. 1.3 6-28. SCHEMATIC DIAGRAM – STR and CD SW BOARD – • See page 25 for Block Diagrams. STR BOARD R938 R940 R942 R944 R946 R948 R950 R952 R954 R956 R966 R968 R969 R970 1.5k 1.5k 2.2k 3.3k 4.7k...

  • Page 56: Trans Board

    HCD-GN1300D 6-29. PRINTED WIRING BOARDS – SUBTRANS and TRANS BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. TRANS BOARD PT1201 W1255 W1252 W1254 W1253 C1252 C1255 D1251 C1254 R1250 F1281 FRONT BOARD JW1297 R1271...

  • Page 57: Schematic Diagram - Subtrans And Trans Board

    HCD-GN1300D Ver. 1.1 6-30. SCHEMATIC DIAGRAM – SUBTRANS and TRANS BOARD – • See page 25 for Block Diagrams. TRANS BOARD NO1296 120/127V PT1201 F1231 FH1230 FH1232 220V W1267 TP1250 W1255 120-127V F1251 FH1250 FH1252 W1266 W1254 220V JW1297 240V...

  • Page 58: Printed Wiring Board - Surround Board

    HCD-GN1300D Ver. 1.1 6-31. PRINTED WIRING BOARDS – SURROUND BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. SURROUND BOARD MAIN BOARD CN111 (Page 48) CN1501 JW1555 TB1503 R1592 C1508 JW1517 JW1554 R1566 Q1512 C1553...

  • Page 59: Schematic Diagram - Surround Board

    HCD-GN1300D Ver. 1.3 6-32. SCHEMATIC DIAGRAM – SURROUND BOARD – • See page 25 for Block Diagrams. SURROUND BOARD TB1502 IC1500 IC1502 JW1504 STK433-100-E STK433-290-E JW1506 SURROUND SPEAKER -37.6 -38.8 38.8 37.8 -37.8 38.3 IC1500 IC1502 RY1501 POWER AMP POWER AMP...

  • Page 60: Printed Wiring Board - Video Board

    HCD-GN1300D 6-33. PRINTED WIRING BOARDS – VIDEO BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. VIDEO BOARD J1702 J1701 J1700 S VIDEO VIDEO COMPONENT VIDEO Pr/Cr Pb/Cb (CHASSIS) (CHASSIS) (CHASSIS) C1722 R1718 R1722 JW1707...

  • Page 61: Schematic Diagram - Video Board

    HCD-GN1300D 6-34. SCHEMATIC DIAGRAM – VIDEO BOARD – • See page 25 for Block Diagrams. • See page 32 for Waveforms. • See page 67 for IC Block Diagrams. VIDEO BOARD IC B/D IC1700 IC1700 MM1758AFBE VIDEO AMP, CN1700 75 OHM DRIVER...

  • Page 62: Printed Wiring Board - Hp Board

    HCD-GN1300D : Uses unleaded solder. 6-35. PRINTED WIRING BOARDS – HP BOARD – • See page 33 for Circuit Boards Location. 6-36. SCHEMATIC DIAGRAM – HP BOARD – HP BOARD HP BOARD ET1003 ET1003 J1005 PHONES NO1013 (CHASSIS) C1060 D1050...

  • Page 63: Printed Wiring Board - Driver Board

    HCD-GN1300D 6-37. PRINTED WIRING BOARDS – DRIVER BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. M751 (LOADING) 1-687-134- (12) (12) 1-687-133- MAIN CN711 BOARD CN132 (Page 48) 1-687-132- (12) (DISC TRAY ADDRESS DETECT) 1-866-201-...

  • Page 64: Schematic Diagram - Driver Board

    HCD-GN1300D 6-38. SCHEMATIC DIAGRAM – DRIVER BOARD – • See page 25 for Block Diagrams. • See page 32 for Waveforms. • See page 67 for IC Block Diagrams. DRIVER BOARD IC B/D IC701 IC701 BA6956AN LD MOTOR DRIVER MOTOR (LD) BOARD...

  • Page 65: Printed Wiring Boards - Connector Board

    HCD-GN1300D 6-39. PRINTED WIRING BOARDS – CONNECTOR AND USB DVD BOARD – • See page 33 for Circuit Boards Location. : Uses unleaded solder. CONNECTOR BOARD CN1600 LP1600 VIDEO BOARD NO1701 NO1600 CN1601 (Page 60) 1-878-539- (12) MIC DVD BOARD...

  • Page 66: Schematic Diagram - Connector Board

    HCD-GN1300D 6-40. SCHEMATIC DIAGRAM – CONNECTOR AND USB DVD BOARD – • See page 25 for Block Diagrams. CONNECTOR BOARD NO1600 DMB18 BOARD MTK_GND CN111 (Page 36) CN1600 MTK_GND MIC DVD VIDEO_SGN BOARD VIDEO_GND NO1016 (Page 43) CN1601 VIDEO-SIGNAL VIDEO...
  • Page 67 HCD-GN1300D • IC Block Diagrams IC105 TK11133CSCL-G (DMB18 Board) IC107 TK11133CSCL-G (DMB18 Board) OVER HEAT & OVER CURRENT PROTECTION CONTROL CIRCUIT BANDGAP REFERENCE IC4602 AK4359AEF-E2 (DMB18 Board) DZF1 AUDIO DZF2 AVDD AVSS MCLK VCOM BICK DATT LOUT1 SDTI1 ROUT1 DATT...
  • Page 68 HCD-GN1300D IC104 EM638165TS-6G (DMB18 Board) DQ15 VDDQ VSSQ DQ14 DQ13 1M ¥ 16 VSSQ CELL ARRAY VDDQ (BANK #A) DQ12 COLUMN DECODER DQ11 VDDQ VSSQ DQ10 VSSQ VDDQ 1M ¥ 16 CELL ARRAY (BANK #B) COLUMN DECODER LDQM BUFFER NC/RFU...
  • Page 69 HCD-GN1300D IC004 BD9701CP-V5 (MAIN Board) IC006 BD9701CP-V5 (MAIN Board) REGULATOR STANDBY VOLTAGE REFERENCE 2 3 4 5 IC256 NJM2903M-TE2 (MAIN Board) IC2001 NJM2903M-TE2 (KARAOKE SCORING Board) IC2002 NJM2903M-TE2 (KARAOKE SCORING Board) AOUT BOUT AIN+ BIN+ IC1100 TC9488FG (MIC DVD Board)
  • Page 70 HCD-GN1300D IC1701 MM1508XNRE (VIDEO Board) 6 IN1 DRIVER CLAMP CLAMP BIAS IC1700 MM1758AFBE (VIDEO Board) S-DC OUT VCC2 S1/S2 S-DC OUT 150KΩ 75Ω VCC1 BIAS 6.75MHz DRIVER LOW-PASS COUT FILTER MUTE 1 CLAMP CVBS IN 75Ω 6.75MHz DRIVER YC MIX...
  • Page 71 HCD-GN1300D IC701 BA6956AN (DRIVER Board) IC712 BA6956AN (DRIVER Board) CONTROL LOGIC...
  • Page 72 HCD-GN1300D • IC Pin Function Description MAIN BOARD IC100 R5F3640MDFAR (SYSTEM CONTROL) Pin No. Pin Name Desciption LED DRIVER - CLOCK Clock signal for LED Driver IC. LED DRIVER - DATA Data signal for LED Driver IC. LED DRIVER - LATCH Latch control signal for LED Driver IC.
  • Page 73 HCD-GN1300D STBY RELAY Main power on/off control signal output. (“H”:power on) STK-MUTE Power amplifi er and sub woofer amplifi er on/off control signal output. (“H”: amplifi er on) PROTECTOR Speaker protect detection signal input from speaker protect circuit. (“H”:protector on)
  • Page 74 HCD-GN1300D DMB18 BOARD (3/5) IC102 CXD9894R-A (CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Desciption RF offset cancellation capacitor connecting pin RFGC RF AGC loop capacitor connecting for DVD-ROM IREF Current reference input AVDD3 –...
  • Page 75 HCD-GN1300D 63, 64 HA18, HA19 Host address output bit 18, 19 DVDD3 – Power supply pin (+3.3 V) for internal digital circuitry Write enable output (active Low) 67 to 74 HA16 to HA9 Host address output bit 16 to 9...
  • Page 76 HCD-GN1300D RA11 DRAM address output bit 11 150 to 155 RA9 to RA4 DRAM address output bit 9 to 4 DVDD3 – Power supply pin (+3.3 V) for internal digital circuitry MUTE123 Mute signal output for other motor drivers (SL, TRK, FCS)
  • Page 77 HCD-GN1300D DVDD18 – Power supply pin (+1.8 V) for internal digital circuitry KMOD Karaoke mode status output (L: normal, H: karaoke) XVOICE MIC signal detection input (L: voice is absence, H: voice exist) SPDIF SPDIF output (HCD-GZR7D only) APLLVDD3 –...

  • Page 78: Exploded Views

    HCD-GN1300D Ver. 1.3 SECTION 7 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • Hardware (# mark) list and accessories are The components identifi ed by mark 0 they may have some difference from the given in the last of this parts list.

  • Page 79: Back Panel Section

    HCD-GN1300D Ver. 1.3 7-2. BACK PANEL SECTION not supplied TU901 not supplied (SUBTRANS Board) M891 not supplied not supplied chassis section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 80: Front Panel Section

    HCD-GN1300D Ver. 1.3 7-3. FRONT PANEL SECTION not supplied (MOTOR DRIVE board) not supplied not supplied not supplied not supplied (DISPLAY board) not supplied (SW(meter)board) S935 not supplied not supplied (HP board) not supplied not supplied (USB DVD board) not supplied...

  • Page 81: Chassis Section

    HCD-GN1300D Ver. 1.3 7-4. CHASSIS SECTION not supplied F1231 (TRANS board) F1251 F1261 F1241 not supplied not supplied not supplied not supplied (SURROUND board) PT1201 not supplied M892 not supplied not supplied (Bracket Fan) not supplied not supplied not supplied...

  • Page 82: Dvd Mechanism Section-1 (Cdm74Hfv-Dvbu101)

    HCD-GN1300D Ver. 1.3 7-5. DVD MECHANISM SECTION-1 (CDM74HFV-DVBU101) M741 DVD mechanism section-2 Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement. Ref. No. Part No. Description Remark Ref. No.

  • Page 83: Dvd Mechanism Section-2 (Cdm74Hfv-Dvbu101)

    HCD-GN1300D Ver. 1.3 7-6. DVD MECHANISM SECTION-2 (CDM74HFV-DVBU101) S711 not supplied (spindle motor) M751 not supplied not supplied (sled motor) not supplied not supplied Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.

  • Page 84: Electrical Parts List

    HCD-GN1300D Ver. 1.3 SECTION 8 CD SW CONNECTOR ELECTRICAL PARTS LIST DISPLAY Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- the parts list may be different from the uF: μF ber, please include the board name.
  • Page 85 HCD-GN1300D Ver. 1.3 DISPLAY DMB18 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R996 1-216-827-11 METAL CHIP 3.3K 1/10W C149 1-107-826-11 CERAMIC CHIP 0.1uF R997 1-216-841-11 METAL CHIP 1/10W C151 1-162-964-11 CERAMIC CHIP 0.001uF R998 1-216-841-11...
  • Page 86 HCD-GN1300D Ver. 1.3 DMB18 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C308 1-164-690-91 CERAMIC CHIP 0.0022uF D3602 6-501-817-01 DIODE MA2J1110GLS0 C402 1-124-589-11 ELECT 47uF D3603 6-501-713-01 DIODE MAZ8033G0LS0 C403 1-124-589-11 ELECT 47uF < EARTH TERMINAL >...
  • Page 87 HCD-GN1300D Ver. 1.3 DMB18 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > R152 1-216-864-11 SHORT CHIP R153 1-216-864-11 SHORT CHIP IC101 (Not supplied) IC MX29LV320DBTI-70-CBA-0901CE R154 1-216-864-11 SHORT CHIP (EA, E15, E4) R155...
  • Page 88 HCD-GN1300D Ver. 1.3 DMB18 DRIVER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R514 1-216-809-11 METAL CHIP 1/10W R2504 1-216-829-11 METAL CHIP 4.7K 1/10W R515 1-216-829-11 METAL CHIP 4.7K 1/10W R3504 1-216-809-11 METAL CHIP 1/10W R516...
  • Page 89 HCD-GN1300D DVD MIC VR FRONT DRIVER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C736 1-164-159-21 CERAMIC 0.1uF C1316 1-128-582-11 ELECT 10uF 100V C737 1-164-159-21 CERAMIC 0.1uF C1318 1-100-153-91 CERAMIC CHIP 220PF 100V C741 1-114-708-41 CERAMIC 0.01uF...
  • Page 90 HCD-GN1300D KARAOKE SCORING FRONT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q1314 8-729-821-00 TRANSISTOR 2SA1207 R1396 1-216-829-11 METAL CHIP 4.7K 1/10W R1397 1-216-829-11 METAL CHIP 4.7K 1/10W < RESISTOR > < RELAY > R1306 1-216-821-11...
  • Page 91 HCD-GN1300D Ver. 1.3 KARAOKE SCORING MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC2001 8-759-700-07 IC NJM2903M C033 1-126-926-11 ELECT 1000uF IC2002 8-759-700-07 IC NJM2903M C034 1-128-959-21 ELECT 1000uF C035 1-100-566-91 CERAMIC CHIP 0.1uF < RESISTOR >...
  • Page 92 HCD-GN1300D MAIN Ref. No. Part No. Description Remark Ref. No. Ref. No. Part No. Part No. Description Description Remark Remark C195 1-117-720-11 CERAMIC CHIP 4.7uF C357 1-117-720-11 CERAMIC CHIP 4.7uF C202 1-126-926-11 ELECT 1000uF C358 1-100-831-91 CERAMIC CHIP 0.001uF C203 1-117-720-11 CERAMIC CHIP 4.7uF...
  • Page 93 HCD-GN1300D Ver. 1.3 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C636 1-162-960-11 CERAMIC CHIP 220PF D570 6-500-848-01 DIODE MC2840-T112-1 C637 1-107-826-11 CERAMIC CHIP 0.1uF D600 6-500-335-01 DIODE MC2838-T112-1 C638 1-126-964-11 ELECT 10uF D601 6-501-722-01...
  • Page 94 HCD-GN1300D Ver. 1.3 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR420 1-216-864-11 SHORT CHIP Q608 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF Q609 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF < COIL > Q610 6-551-696-01 TRANSISTOR ISA1235AC1TP-1EF L001 1-457-822-11 COIL, CHOKE 47uH...
  • Page 95 HCD-GN1300D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R138 1-216-833-11 METAL CHIP 1/10W R262 1-216-825-11 METAL CHIP 2.2K 1/10W R141 1-216-809-11 METAL CHIP 1/10W R264 1-216-827-11 METAL CHIP 3.3K 1/10W R142 1-216-833-11 METAL CHIP...
  • Page 96 HCD-GN1300D MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R402 1-216-809-11 METAL CHIP 1/10W R513 1-216-833-11 METAL CHIP 1/10W R403 1-216-809-11 METAL CHIP 1/10W R514 1-216-829-11 METAL CHIP 4.7K 1/10W R404 1-216-809-11 METAL CHIP 1/10W...
  • Page 97 HCD-GN1300D Ver. 1.3 MAIN MIC DVD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R622 1-216-817-11 METAL CHIP 1/10W R686 1-218-446-11 METAL CHIP 1/10W R623 1-216-833-11 METAL CHIP 1/10W R687 1-218-446-11 METAL CHIP 1/10W R688 1-218-446-11...
  • Page 98 HCD-GN1300D Ver. 1.3 MIC DVD MOTOR(LD) MOTOR(TB) SENSOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1128 1-124-257-00 ELECT 2.2uF R1119 1-216-809-11 METAL CHIP 1/10W C1129 1-124-257-00 ELECT 2.2uF R1120 1-216-809-11 METAL CHIP 1/10W C1130 1-124-257-00 ELECT 2.2uF...
  • Page 99 HCD-GN1300D Ver. 1.3 SUBTRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D929 6-502-795-02 DI 1L0351B12C0MXT03 S919 1-771-410-21 SWITCH, KEYBOARD (PRESET -.) D930 6-502-795-02 DI 1L0351B12C0MXT03 D931 6-502-795-02 DI 1L0351B12C0MXT03 S920 1-771-410-21 SWITCH, KEYBOARD (NIGHT MODE)
  • Page 100 HCD-GN1300D Ver. 1.3 SURROUND SUBTRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > < DIODE > 0 S1200 1-786-055-32 SELECTOR, VOLTAGE D1500 6-500-335-01 DIODE MC2838-T112-1 D1502 6-501-817-01 DIODE MA2J1110GLS0 < TRANSFORMER > D1506...
  • Page 101 HCD-GN1300D Ver. 1.3 SURROUND TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1540 1-216-825-11 METAL CHIP 2.2K 1/10W < TERMINAL > R1541 1-216-845-11 METAL CHIP 100K 1/10W R1542 1-216-839-11 METAL CHIP 1/10W TB1502 1-820-067-11 TERMINAL BOARD (SURROUND SPEAKER)
  • Page 102 HCD-GN1300D Ver. 1.3 USB DVD VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark USB DVD BOARD < IC > ************** IC1700 6-710-470-01 IC MM1758AFBE < CAPACITOR > IC1701 6-703-622-01 IC MM1508XNRE C1052 1-164-360-11 CERAMIC CHIP 0.1uF <...
  • Page 103 HCD-GN1300D Ver. 1.3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-500-657-11 CORD, FERRITE 1-400-092-11 CORD, FERRITE (EA) 1-481-528-11 FILTER, CLAMP (FERRITE CORE) (EA) 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 0 321 8-820-322-04 DEVICE, OPTICAL KHM-313CAB/C2NP...
  • Page 104 HCD-GN1300D REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2009.06 2009.09...

Table of Contents

Save PDF