Sony STR-DE915 Operating Instructions Manual page 32
Hide thumbs
Also See for STR-DE915:
- Operating instructions manual (41 pages) ,
- Operating instructions manual (40 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
32
Additional Information
ees
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 8-ohm load, both
channels driven, from 20 -
20,000 Hz, rated 100 watts
per channel, minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output
(USA model only).
Amplifier section
POWER OUTPUT
Stereo mode
(8 ohms 20 Hz - 20 kHz,
THD 0.09%)
100 W + 100 W
Surround mode (8 ohms at 1 kHz, THD
0.8%)
Front: 100 W/ch
А
Center*: 100W
Rear*: 100 W/ch
* Depending on the sound
field settings and the
source, sound will not be
output.
5.1/0У0 mode (unavailable on STR-DE915)
(8 ohms at 1 kHz, THD
0.8%)
Front: 100 W/ch
Center: 100W
Rear: 100 W/ch
Dynamic power output
155 W + 155 W, 8 ohms
220 W + 220 W, 4 ohms
Harmonic distortion at rated output
Less than 0.09% (with
DIRECT PASS on)
Frequency response
PHONO:
RIAA
equalization curve
+0.5 dB
CD, TAPE, DAT/MD, ~~
VIDEO 1, 2,:
10 Hz - 50 kHz ?? dB (with
DIRECT PASS on)
Inputs
ai
"e
weightin
Sensitivity impedance network, id
input level)
PHONO
2 .
50
754В*
25mV
jiohms
(A, 2.5 mV)
CD(STR-
150 mV
DE915)
CD (other
200 mV
models)
50
82 dB*
TAPE, DAT/MD,
kilohms
(A, 150 mV)
VIDEO 1, 2, 3
ER yy
LD/DVD,
TVIDBS
Prarie
100 dB
AC-3 R
(57-08915
—
759
(A, 20 KHz,
only)
LPF)
ртр. CD,
100 dB
DAT/M
OPTICAL
EN
м
(A, 20 kHz,
(STR-DE915
LPF)
only)
(un walla
d
navailable
50
82 dB*
on STR- — 200mV
| ,
у
DE915)
kilohms
(A, 150
mV)
* 78 IHF
Outputs
VIDEO 1, 2 AUDIO OUT:
Voltage: 150 mV,
Impedance: 10 kilohms
WOOFER:
Voltage: 2 V
E
Impedance: 1 kilohms
PHONES:
Accepts low and high
- impedance headphones
BASS BOOST
STR-DE915: +6 dB at 50 Hz
STR-DE715/DE615/D660Z/
D560Z: +10 dB at 70 Hz
TONE (unavailable on STR-DE915)
+8 dB at 100 Hz and 10 kHz
Digital signal processor section
(STR-DE915 only)
Modulation (A/D conversion)
High Density Linear
Converter
Demodulation (D/A conversion)
High Density Linear
Converter (Advanced
pulse D/A
converter)
Sampling frequency
48 kHz
LFE MIX:
MUTE, -20 - 0 dB, 0.5 dB
step
D. RANGE COMP:
OFF, 0.1 - 0.9, STD, MAX
REAR level:
-20 - +10 dB, 0.5 dB step
CENTER level:
-20 - +10 dB, 0.5 dB step
SUB WOOFER level:
~20 - +10 dB, 0.5 dB step
EFFECT:
21-step adjustable
WALL:
17-step adjustable
SEAT F/R:
17-step adjustable
SEAT L/R:
17-step adjustable
REVERB time:
17-step adjustable
Depending on the sound
field, some parameters
may not be adjustable (see
page 26).
Surround
Equalizer
BAND:
BASS/TREBLE
Turnover frequency:
Bass: 99 Hz - 992 Hz
Treble: 1.0 kHz - 8.6 kHz
Level: +10 dB, 0.5 dB step
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono: 18.3 dBf, 4.5 рУ
Stereo: 38.3 dBf, 45 ну
Usable sensitivity
11.2 dBf, 2 V (IHF)
SIN
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation
45 dB at 1 kHz
Frequency response
22.
~ 30Hz-
15 kHz 95 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
With 10 KHz interval:
530 - 1710 kHz (USA and
Canadian model only**)
530 - 1610 kHz (models for
all other countries except
for Australia)
With 9 kHz interval:
531 - 1710 kHz (USA and
Canadian model only)
531 - 1602 kHz (Australian
model and models for all
other countries"*)
Advertisement
Table of Contents
