Page 1
During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance. You can download the latest version of firmware from www.toshiba-om.net/firmware.php Some features listed in this document are limited due to local legislation and may not be available in all countries.
Page 2
New channels are launched on Freeview from time to time along with other updates to the service. So it pays to retune your digital TV periodically to make sure your Digital TV/Radio channels are up to date. To retune your Toshiba Digital TV, please refer to the Re-tune section for guidance.
Contents Safety Precautions ..........5 Viewing Info Banner, Electronic Programme Guide ..............22 Air Circulation ............. 5 Viewing Info Banner .......... 22 Heat Damage............5 Electronic Programme Guide......22 Mains Supply ............5 Language Selection ..........23 Warning .............. 5 Do ...............
Page 4
CEC Auto Power On ......... 35 Network Settings, Portal, Internet Browser and YouTube ............... 36 Configuring Network Settings ......36 First enter to Toshiba Portal ......36 Using the Toshiba Portal ........36 Using the Internet Browser ....... 36 Using YouTube ..........
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products.
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
Important safety information • Any function related to the digital television (with the DVB logo) is available only within the country or area where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/T2/C signal in the area where you live.
Fitting or Removing the stand Fitting or Removing the stand (1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge. (2) To fit the stand use the screws supplied. (3) Remove the screws fixing the stand (4) After the screws are removed, hold the stand in place, then remove the stand and the plastic moulding from the TV.
The Remote Control Simple at-a-glance reference of the remote control. 1. Standby 18. Play 2. Numeric buttons 19. Subtitle on-off (in Media Browser mode and in DVB 3. No function channels) 4. Mute 20. Stop 5. Volume Up / Down 21.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). LAN Input 5Vdc HDMI Input Max:500mA Sockets (*) USB Inputs (*) RGB/PC Input SPDIF...
CEC operation is available if a CEC device is present. This or uncompressed digital video from a DVI (Digital Visual feature is limited to Toshiba disc players that support CEC. Interface) source device. The CEC osd menu is accessed through the “QUICK” button...
Connecting a Computer Connecting a DVD Player To Connect a Computer Connecting to a DVD Player via YPbPr Some DVD players are connected through COMPONENT With either an RGB/PC or an HDMI connection, you can watch SOCKETS (YPbPr). In this case, you must use the supplied your computer’s display on the TV and hear the sound from Component YPbPr video connection cable for enabling the TV’s speakers.
You can use this To connect the TV to the home network wirelessly just networking system to connect to the Toshiba Portal or select Network Type as Wireless Device in Network to access photo, video and audio files that are stored Settings menu and then highlight Network.
Power Save Mode Environmental Information This television is designed to be environment friendly. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
Controlling the TV A wide variety of external equipment can be connected via the sockets located on the side and back of the TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the buttons on the Back of the TV may be used for some functions.
Initial Installation Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on The Remote Control page.
Page 17
Initial Installation - continued Note: You can press MENU button to cancel. You can select Network, Frequency, Network While the search continues a message will appear, ID and Search Step from this screen. For asking whether you want to sort channels according highlighting lines you see, use Up or Down button.
Auto Tuning Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • It is recommended to run Auto Tuning periodically to ensure that all new services are added. Please be aware that Auto Tuning will completely retune the television and all current channels and settings will be lost.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or The television can be tuned-in manually. For example: can be used for direct channel entry if the multiplex if the television cannot be connected to a media channel is known.
General Operation Stereo and Bilingual Transmissions Standby Notifications If the TV switches off while in No Signal mode, the If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time following on-screen message will be displayed on the positions are changed, disappearing after a few seconds.
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. Viewing Channel List Deleting a Channel You can press GREEN button to tag/untag all The channel order may be changed to suit your channels;...
Viewing Info Banner, Electronic Programme Guide Viewing Info Banner • Press SUBTITLE button to sort channels by a genre. • For information on a highlighted programme, press • Press“INFO - ” button. The information screen will “INFO - ” button. appear giving details of the channel and programme currently being viewed.
Language Selection Language Settings Using this menu you can adjust the preferred language settings. Some features may not be available. • Press MENU button and select Settings by using Left or Right button. • Select Language and press OK to view this menu. Select the desired language by using Left or Right button.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. Viewing Parental Control Menu • Use numeric buttons to enter new pin number. You will need to input your new pin a second time for Press MENU button and select the Settings by using verification purposes.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. Configuring Picture Settings Sharpness You can use different picture settings in detail. You Sets the sharpness value for the objects displayed on the screen. Press Left or Right button to adjust can customize current picture mode settings as desired.
Configuring Picture Settings - continued Picture Zoom: Sets the picture size to Auto, Full, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Press Left or Right button to change the setting. Film Mode (optional): Films are recorded at a different number of frames per second to normal television programmes.
Changing Picture Format Press “SCREEN - ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.
Configuring PC Picture Settings PC Picture Settings (*) Press Left or Right button to adjust the value. Dot Clock (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings Dot Clock adjustment corrects the interference will be added to the Picture Settings while in VGA/ that appear as vertical banding in dot intensive PC mode.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. Configuring Sound Settings Balance (Only for speaker) Sound settings can be configured according to your This setting is used for emphasizing left or right speaker personal preferences.
Settings Menu Operation, Conditional Access Configuring Your TV’s Settings Also use this option to view your ESN-number, which is an unique ID number for Netflix, created especially Detailed settings can be configured to suit your to identify your TV. Enter this number if requested by personal preferences.
Setting Timers Timers Playback: Controls the permission for the playback of the programme that will be recorded. There are three To view Timers menu, press MENU button and options available, Use parental settings, Disallowed select Settings by using Left or Right button. Press and Allowed.
Recording Configuration This feature is not available in all countries. For the countries where this feature is available a USB connected storage device will be required. Recording Configuration IMPORTANT: Note 1: ALL the data stored on the USB storage You can configure recording preferences using this device will be lost and then the disk format will be menu.
Setting Date/Time Source Settings Configuring Date/Time Settings Configuring Source Settings You can configure date/time preferences by using You can enable or disable selected source options. The TV will not switch to the disabled source options when the this menu screen. “SOURCE - ”...
Other Controls Configuring Other Settings - General Blue Background You can configure the settings of your TV. Select If the signal is weak or absent, the TV will automatically Settings from main menu and press OK to view the change to a blue screen. To enable this, set Blue Settings menu.
Other Controls - continued • Use Up or Down button to select Audio Description Power Up Mode setup and then press Left or Right button to set This setting configures the power up mode preference. this setting. Standby: The TV always powers up in Standby mode. Auto TV Off Last State: The TV always switches on with the last You can set the timeout value of auto off feature.
Point the cursor to “ ” button and Toshiba Portal is a service, where content (web sites, press OK. applications, online services etc.) can be viewed Press the BACK button to close the virtual keyboard across the web through a simple user interface.
Network Settings, Portal, Internet Browser and YouTube continued Press the EXIT button to close the portal and watch TV again. NOTES: • The virtual keyboard or numeric buttons on the remote, which are assosiated with the letters of the alphabet, can be used for entries. •...
USB Record Feature This feature is not available in all countries. For the countries where this feature is available a USB connected storage device will be required. This feature allows you to record and play back About the USB Record Feature digital broadcast contents stored on a USB storage •...
” button on the remote control. The Media Browser menu is also accessable from the main menu. Press Toshiba cannot and does not grant such permission. the MENU button on the remote. Select Media • Depending on the file size and amount in your USB...
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory or media server, To view photo files from a USB Memory or media server, you can use this menu screen.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. Slideshow Feature (Play Preview): Display selected file in LANG - a small preview screen. Press again to stop preview. You can use this feature to display all images Red button: Sort files by name.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. Note: Using MENU button in Media Browser Mode You can set subtitles by using button “LANG - ”...
• For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer. Below is a guide to the functions of the remote control text buttons. Accessing Sub-Pages If a text page has sub-pages, press Left/Right buttons or enter the sub-page number 0001, 0002, 0003 etc.
Appendix A: PC Input Typical Display Modes The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix C: PIN Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No.
You must allow the television to complete the search. * This retune process may affect any saved information stored on your product. Please consult your on-line web manual or contact the Toshiba support as detailed below. TOSHIBA Customer Helpline: 0333 222 7111 TOSHIBA Online Support: www.toshiba.co.uk/tv-dvd-support...
For more detailed information about the collection and recycling programmes available in your country, please visit our website (www.toshiba.eu/recycling) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
Q & A Section Question Answer Check if the TV is not in standby mode Why is there no sound or picture? Check the mains plug and all mains connections Check if the volume has not been turned off or sound mute has Why is there a picture but no sound? not been selected Why does the sound come only from...
Page 52
REACH in a concentration above 0.1 % weight by weight. Toshiba herby declares that this product with an integrated Wireless Function is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.