WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein.
IMPORTANT NOTICE User's Guide Contents: Install Autodesk DWF Viewer Internet Explorer Settings Operating Environment Functions Provided on Each Drawing Page Using with Network Install Autodesk DWF Viewer Autodesk DWF Viewer is necessary to view drawings and to activate the functions of this system. Please download and install.
Page 4
for Internet Explorer 7 for Windows Vista...
Operating Environment : Pentium III or higher recommended Monitor : 1024 x 768 or higher resolution recommended Mouse : A mouse with wheel recommended : Microsoft Windows 2000 SP4 / XP / Vista Browser Microsoft Internet Explorer 6.0 / 7.0 Drawing viewer : Autodesk DWF Viewer 6.0 / 7.0 * Use the software following respective license terms and conditions.
Page 6
ZEUS Engine Program Ver.2 and ZEUS Service Manual Ver.2 are to be modified. Perform the procedure described below. Preparation 1. Run the program file zuesFPch.exe to install the program file for File-Path to the Local PC. -> Download zeusFPch_setup.zip (2.3MB) 2.
Page 7
1. Whenever changing the file-path of both ZEUS Engine Program and ZEUS Service Manual to use with network, pay the attention to set the "Exchange to" column that should have a proper relation between ZEUS Engine Program and ZEUS Service Manual with referring the following. Run the zeusFPch and set "Exchange to"...
Page 8
4. Run the ZeusFPch to change the path in the ZEUS Service Manual Ver2. 5. Set unzipped ZEUS Service Manual in the created folder in the server to the "Target Folder", and then press "START". (This procedure is required whenever placing service manual.) Confirmation Confirm that service manual on the server can be operated normally by client PC.
Page 9
Through WEB, ver. 6.5 has been released but with it, the linking function in this manual may not work properly. If ver. 6.5 has been installed, uninstall it and reinstall ver. 6.0. To get ver. 6.0, click the icon, or contact to the nearest Toshiba Service Centre for further assistance. Freezing windows opened (Cannot close the open windows) This may happen occasionally.
Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts.
LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING: This product is manufactured using lead free solder.
SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
10. Touch current check. (After completing the work, measure touch current to prevent an electric shock.) Plug the AC cord directly into the AC outlet. Do NOT use an isolation transformer for this check. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth ground such as a water pipe.
Page 14
characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the international hazard symbols on the schematic diagram and the parts list.
SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 16
result in discoloration or stripes. Immediately remove any type of fluid from the screen. 5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can damage the panel. 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity.
Page 17
10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity.
SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
ADJUSTMENT Service Mode Entering to Service Mode 1. Press button once on remote control. ↓ 2. Press button again and hold button down. ↓ Service Mode display 3. While holding the button, press MENU button on TV set. Displaying the Adjustment Menu Press MENU button on TV.
Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC. button (on remote control) Test signal selection PROGRAMME (on TV or remote control) Selection of the adjustment items Change of the data value Volume...
Page 140
BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX CONTRAST MAX MOID MODEL ID PLVN PANEL VENDOR PLSZ PANEL SIZE OPT5 OPTION DATA 5 OPT2 OPTION DATA 2 OPT6 OPTION DATA 6 OPT7 OPTION DATA 7 OPT8 OPTION DATA 8 HTLID HOTEL ID VOLX MAXIMUM VOLUME LEVEL The listed items are set to proper values after setting the correct Model ID data (Refer to...
Option Data Model Name (HEX) Vendor Size ID (HEX) ID (HEX) (OPT5) (HEX) 32SL733 0x13 SAMSUNG 0x05 0x06 0x00 40SL733 0x14 SUMSUNG 0x0e 0x06 0x00 46SL733 0x15 SAMSUNG 0x0a 0x06 0x00 Initializing Data setting flowchart after replacing the Signal Unit...
Test Signal Selection Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster All Black All White Self Diagnostic Function 1. Press "9" button on remote control during display of adjustment menu in the Service...
Page 143
Mode. The diagnosis will begin to check if interface among IC's is executed properly. 2. During diagnosis, the following displays are shown. * Self check displays and items are subject to the models. Item Explanation/Data Format 1 TV CPU SW Version information of TV-MICRO.
Page 144
1. Press "9" button twice on remote control during display of adjustment menu in the Service Mode. 2. During Version Check, the following displays are shown. * Version check displays and items are subject to the models. Item Explanation/Data Format 1 TV Model Display model name strings 2 TV Model ID...
OK : A/D adjustment set correctly. NG : A/D adjustment set incorrect. – : A/D adjustment is not needed because the picture format is not used. 21 A/D Adjust RGB A/D adjustment status of RGB (SCART or PC) input. Same as above 22 Default PhotoView JPEG Status of Default picture for Photo Frame xxx.jpg : default picture is loaded : default picture is not loaded...
Page 146
power ON when D6 is set to 1.) D6 (bit6) Enable mode that TV On will be appeared Enable Disable in forced when turning the main power ON D5 (bit5) FRONT Key Disable Enable D4 (bit4) All keys except for INPUT key Disable Enable (Video/TV)
Page 147
D0 (bit0) 1 [dec]: Dynamic 2 [dec]: Standard 3 [dec]: Movie Setting Hotel Mode via Hotel Mode Settings Menu 1. Press button once on remote control. ↓ 2. Press button again and hold button down. ↓ (Hotel Mode Settings menu) 3.
Page 148
Setting Option Data Hotel Mode Disable OPT2, D0 Enable Control Panel Enable all front panel keys OPT2, D5 ~ D4 Disable all front panel keys Disable all front panel keys except (Except for INPUT Input) Remote Enable OPT2, D3 Disable (except for Service Mode function) SETUP Menu Enable access to Setup menu...
Page 149
applied Force On Force TV ON when the main power is applied Force Force TV Standby when the main Standby power is applied RF tuning by P , and Position Change OPT8, D3 RETURN keys is enabled on HDMI/PC Input When the input source is HDMI or PC Input, RF tuning by P and RETURN keys is disabled...
↓ (Hotel Clone menu display) c. While holding the button, press P button on TV set. 3. Press buttons to select "TV to USB". 4. Insert a USB device and press OK to copy the settings to the USB device. 5.
Page 151
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer. PowerOn/Standby LED Red ON (solid) = The TV power cord is plugged in, but TV is in Standby. Green ON (solid) = The TV is turned on. OnTimer LED Green ON (solid) = The OnTimer is set.
Page 152
6. When the upgrade is completed, the following message is displayed. 7. Disconnect the USB device. 8. The TV set is automatically turned off and then on. 9. After the TV is turned on, perform Factory Reset (select "Reset TV" in the Setup Menu).
PANEL IDENTIFICATION Panel Identification If the several panels are alternatively used in the same model without amending the model name, the identification marking will be shown at the last digit of the set serial number on the specification label on the back cover. In servicing, do not alter the panel because several setting and parts are different.
PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" "PRODUCT SAFETY NOTICE". CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 155
PARTS LIST ↓Select Block : Search 1 / 1 Jump Page : Jump Location : Search Parts No. :...
Page 191
PARTS LIST Cabinet Block : Search 1 / 1 Jump Page : Jump Location : Search Parts No. : Block Location Parts No. Description Cabinet A201S 75018253 FRONT BEZEL ASSY, FRO SERVICE Cabinet A401A 75018265 CABINET/RACK BACK COVER ASSY, BACK COVER ASSY Cabinet A421 75018176 STAND ASSY...
Page 192
PARTS LIST Packing Block : Search 1 / 1 Jump Page : Jump Location : Search Parts No. : Block Location Parts No. Description Packing A701A 75018266 CARTON TOP CASE, TOP CASE Packing A701B 75018267 CARTON BOTTOM CASE, BOTTOM CASE Packing A702A 75018268 PAD TOP PACKING L/R/C, TOP PACKING L/R/C...
FUNCTION AND OPERATION Controls and Input Connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
FUNCTION AND OPERATION Tuning the Television for the First Time Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control.