Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Toshiba Satellite P30-132
Summary of Contents for Toshiba Satellite P30-132
- Page 1 Satellite P30 Series TOSHIBA Satellite P30 Series User's Manual...
- Page 2 Microsoft Corporation. Centronics is a registered trademark of Centronics Data Computer Corporation. Photo CD is a trademark of Eastman Kodak. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. iLINK is a trademark of Sony Corporation.
-
Page 3: Safety Instructions
Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. - Page 4 ■ To remove power from the computer, turn it off, remove the battery, and disconnect the AC adapter from the electrical outlet. ■ To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm.
-
Page 5: Fcc Information
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, USB port and microphone jack. - Page 6 Contact Address: Telephone: EU Declaration of Conformity TOSHIBA declares, that the product: Satellite P30 conforms to the following Standards: Supplementary Information: "The product complies with the requirements This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany.
- Page 7 In other countries, the drive is certified to comply with the requirement pursant to IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drives in the following list according to the model. Manufacturer TOSHIBA Samsung Matsushita Matsushita Matsushita TEAC...
- Page 8 International precautions ■ This drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
- Page 9 VORSICHT: Dieses Gerät enthält ein Laser- System und ist als "LASERSCHUTZKLASSE 1 PRODUKT" klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste "autorisierte Service-Vertretung".
- Page 10 Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
-
Page 11: Type Of Service
Redial Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or longer. -
Page 12: If Problems Arise
When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. Disconnection... - Page 13 Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.
-
Page 14: Important Notice
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. - Page 15 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under “Environmental Requirements” in Appendix A, Specifications. Contact Toshiba Technical Service and Support for more information. User’s Manual...
-
Page 16: Table Of Contents
Satellite P30 Series Table of Contents Preface ...xxii Introduction Chapter 1 Equipment checklist........1-1 Hardware . - Page 17 Restoring the preinstalled software ......3-12 Restoring TOSHIBA utilities and drivers ..... 3-12...
- Page 18 DLA for TOSHIBA ........
- Page 19 The Keyboard Chapter 5 Typewriter keys......... . . 5-1 F1 ...
- Page 20 Optional Devices Chapter 7 PC cards ..........7-2 Installing a PC card.
- Page 21 TOSHIBA support ........
-
Page 22: Preface
Satellite P30 Series Preface Congratulations on your purchase of the Satellite P30 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite P30 computer. -
Page 23: Manual Contents
Manual contents This manual has eight chapters, three appendixes and a Glossary. Chapter 1, Introduction, is an overview of the computer's special features, utilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function. Chapter 3, Getting Started, provides a quick overview of how to begin operating your computer and gives tips on safety and designing your work area. - Page 24 Keys The keyboard keys are used in the text to describe many computer operations. A distinctive typeface identifies the key top symbols as they appear on the keyboard. For example, Enter identifies the Enter key. Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+).
-
Page 25: Introduction
Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use. -
Page 26: Software
LAN and Multiple Digital Media Card Slot) ■ Online help ■ Product Recovery Disk ■ TOSHIBA Tools & Utilities CD-ROM The system may not function properly if you use drivers that are not preinstalled or distributed by TOSHIBA Documentation ■ Your computer's documentation: ■... -
Page 27: Features
Features The Satellite P30 series computer uses TOSHIBA's advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Chip Set User’s Manual... - Page 28 Memory Slot L2 Cache Video RAM BIOS User’s Manual Two DDR SODIMM sockets with support for 256MB/512MB/1GB modules Two DDR SODIMM sockets with support for 256MB/512MB/1GB modules ® 128KB L2 Cache (Intel Celeron to 2.8GHz) ® 256KB L2 Cache (Intel Celeron 325/330/335 or higher) 512KB L2 Cache (Mobile Intel...
-
Page 29: Touch Pad
Power Battery Pack RTC Battery AC adaptor Floppy Diskette Drive Devices Touch pad Display User’s Manual 12-cell Li-Ion smart battery pack with 14.8V*6450mAh capacity or 8-cell Li-Ion smart battery pack with 14.8V*4300mAh capacity (depending on the model) Approximately 12 hours or longer charging time to 100% battery capacity (system on). - Page 30 Disks Fixed hard disk CD-RW/DVD-ROM drive User’s Manual Either one 40GB/60GB/80GB/100GB or larger capacity hard drive Bus Master IDE 9.5m/m 2.5" HDD Support Ultra DMA 100 Some models are equipped with a full-size CD- RW/DVD-ROM module that lets you record data to rewritable CD-Rs and CD-RWs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor.
- Page 31 DVD±R/±RW (DVD Dual) drive supporting Double Layer User’s Manual Some models are equipped with a full-size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor.
- Page 32 DVD±R/±RW (DVD Dual) drive User’s Manual Some models are equipped with a full-size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at a maximum 8 speed and CD-ROMs at a maximum 24 speed.
- Page 33 DVD Super Multi drive supporting Double Layer User’s Manual Some models are equipped with a full-size DVD Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor.
- Page 34 DVD Super Multi drive Computers in this series can be configured with multiple types of optical media drive. For more information on the optical media drives available, talk to your dealer. More information on using the optical media drive can be found in Chapter 4, Operating Basics.
- Page 35 Slots PC Card Multiple Digital Media Card (SD/ MMC/SM/MS/MS Pro/ Ports (depending on configuration) External monitor Universal Serial Bus i.LINK (IEEE1394) TV Out Multimedia Sound system Direct CD Play Headphone jack Microphone jack User’s Manual The computer is equipped with one Type II PC Card slot MODEM/LAN card PC Card 8.0 Compliant, supports 3V and 5V...
-
Page 36: Security Lock Slot
Communications Modem Wireless LAN Security Security Lock Slot User’s Manual An internal modem provides capability for data and fax communication. It supports V.90 or V.92 depending on the region. The speed of data and fax transfer depends on the analog telephone line conditions. -
Page 37: Special Features
Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Display Automatic Power off HDD Automatic Power off System Automatic Standby/Hibernation Keypad Overlay Power-on Password Battery Save Mode... - Page 38 Hibernation Mode and shuts down. You can activate this setting in the TOSHIBA Power Saver utility. This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk.
-
Page 39: Utilities
ConfigFree also allows you to find communication problems and create profiles for easy switching between different locations and communication networks. To start ConfigFree, click the Windows Start Button, point to All Programs, point to TOSHIBA, point to Networking and click ConfigFree. 1-15... - Page 40 DVD±RW or CD-RW media via a drive letter like a floppy disk or other removable disks. TOSHIBA Touch and Launch is a tool that allows you to perform various tasks easily by using the Touch pad. It is useful in the following conditions.
-
Page 41: Options
You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules The computer comes with at least one memory module pre-installed. Use only PC2700 compatible DDR memory modules. See your TOSHIBA dealer for details Battery Pack AC Adaptor USB FDD Kit User’s Manual... -
Page 42: Chapter 2 The Grand Tour
Satellite P30 Series The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features. -
Page 43: Left Side
Power LED Battery LED Left side The following figure shows the computer left side Optical Media Drive Optical Media Drive User’s Manual The Power LED flashes amber while the system is in Standby mode. The LED turns off when the computer is turned off or in hibernation mode. -
Page 44: Right Side
Right side The following figure shows the computer right side PC Card Slot Multiple digital media card slot * Some models are not equipped with Wireless Communication Switch. * i.LINK is provided with some models. PC Card Slot Multiple Digital Media Card Slot Universal Serial Bus (USB) Port... -
Page 45: Back Side
Microphone Jack Wireless Communication Back side The following figure shows the computer back panel. DC-IN 19V Jack Security Lock Security Lock DC-IN 19V Jack External Monitor Port TV Out Universal Serial Bus (USB) Port User’s Manual A standard 3.5 mm mini microphone jack enables connection of a three conductive type mini-jack for a monaural microphone. -
Page 46: Underside
LAN Jack Modem Jack Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Expansion Memory Socket Battery User’s Manual This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second,... -
Page 47: Front With The Display Open
Battery Double Lock Battery Latch Front with the display open The following figure shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle Display Screen Power Button * Some models are not equipped with a CD/DVD button and CD/DVD play... - Page 48 Power Button Left and Right Speakers TouchPad TouchPad Cotrol Buttons Previous/Rewind Next/Fast Forward Stop Play/Pause CD/DVD Button If Random or Shuffle is selected in Windows Media Player, selecting Next or Previous advances to a random selection. User’s Manual Press the power button to turn the computer's power on and off.
-
Page 49: System Status Indicators
Display Screen To prolong the life of your display screen, use a screen saver when you're not working the computer and it is idle. System Status Indicators The following figure shows the system indicator lights, which light when various computer operations are in progress HDD Drive LED HDD Drive LED CD Playback Mode... -
Page 50: Keyboard Indicators
Keyboard Indicators Arrow Mode Arrow Mode Numeric Mode Caps Lock Caps Lock User’s Manual Numeric Mode When the Arrow mode icon lights green, you can use the keypad overlay (light gray labeled keys) as cursor keys. Refer to the Keypad Overlay section in Chapter 5, The Keyboard. -
Page 51: Optical Media Drive
Optical Media drive One of the following optical media drives is installed in the computer: CD-RW/ DVD-ROM drive, DVD-ROM drive, DVD-R/-RW drive, DVD±R/ ±RW drive, DVD Super Multi drive. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. -
Page 52: Formats
Formats The drives support the following formats ■ DVD-ROM ■ CD-DA ■ Photo CD™ (single/multi- session ■ CD-ROM XA Mode 2 (Form1, Form2) ■ CD-RW/DVD-ROM drive The full- size CD-RW/DVD-ROM drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/ DVDs without using an adaptor. -
Page 53: Dvd±R/±Rw (Dvd Dual) Drive
DVD±R/±RW (DVD Dual) drive The full- size DVD±R/±RW drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the other edge. -
Page 54: Dvd Super Multi Drive
DVD Super Multi drive The full-siza DVD super multi drive module lets you record data to rewritable CD/DVDs as well as run either 12cm(4.72") or 8cm(3.15") CD/ DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the other edge. -
Page 55: Ac Adaptor
To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 4, Operating Basics, for details. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. -
Page 56: Chapter 3 Getting Started
Satellite P30 Series Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability. -
Page 57: General Conditions
In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ TOSHIBA Power SaverMake sure there is adequate space around the computer for proper ventilation. ■... -
Page 58: Seating And Posture
Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips and to figure. ■ Place your chair so that the keyboard is at or slightly below the level of your elbow. -
Page 59: Work Habits
Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency. -
Page 60: Connecting The Ac Adaptor
AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. -
Page 61: Opening The Display
Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to the right to unlatch the display panel. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. -
Page 62: Turning On The Power
Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Starting up for the first time in this chapter. -
Page 63: Turning Off The Power
Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system's main screen. -
Page 64: Starting Hibernation
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Power Save Modes tab and the Advanced tab. Otherwise, the computer will shut down in Standby mode. -
Page 65: Standby Mode
To prevent the computer from automatically entering standby mode, disable Standby in the TOSHIBA Power Saver. Open the TOSHIBA Power Saver and click the Power Save Modes tab. Next select either an AC Power or Battery Power option and then click details. - Page 66 1. Click start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. To enable it, select the TOSHIBA Power Saver icon in the Control Panel and select the Advanced tab and then set your When I close the lid options to Standby.
-
Page 67: Restarting The Computer
Restoring the preinstalled software If preinstalled files are damaged, use the Product Recovery Media or the TOSHIBA Tools & Utilities CD-ROM to restore them. To restore the operating system and all preinstalled software, follow the steps below. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. -
Page 68: Chapter 4 Operating Basics
Satellite P30 Series Operating Basics This chapter gives information on basic operations including using the Touch pad, optical media drives, the internal modem, LAN, wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the Touch pad To use the Touch pad, simply move your finger tip across it in the direction you want the on-screen pointer to go. -
Page 69: Using Optical Media Drives
The Touch pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap the Touch pad instead of pressing a control button. You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window. -
Page 70: Loading Optical Media Discs
Loading optical media discs To load a DVD/CD, follow the steps below and refer the following figures. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. b. Pressing the eject button will not open the drawer when the computer's power is off. - Page 71 4. Lay the DVD/CD, label side up, in the drawer. Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the DVD/CD until you feel it click into place.
-
Page 72: Removing Optical Media Discs
Removing optical media discs To remove the DVD/CD, follow the steps below and refer the following figure. Do not press the eject button while the computer is accessing the DVD drive. Wait for the Diskette/Optical Media indicator to go out before you open the drawer. -
Page 73: Cd/Dvd Button
CD/DVD Button The CD/DVD button can be defined upon user's preference. Once the button has been defined, activate this button will launch the application defined. If without specific definition it will launch CD/DVD only. Press CD/DVD or play buttons when the computer system power is off. If an audio CD is in the drive, the system enters CD playback mode and operates as a stand-alone CD player. -
Page 74: Writing Cds On A Cd-Rw/Dvd-Rom Drive
DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW disc that may be caused by writing or rewriting with this product. -
Page 75: Before Writing Or Rewriting
We recommend the following manufacturers of CD-R and CD-RW media. Media quality can affect write or rewrite success rates. CD-RW: TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■... -
Page 76: Writing Cd/Dvds On A Dvd±R/±Rw Drive And A Dvd±R/±Rw Drive Supporting Double Layer
DVD±R/±RW drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW disc that may be caused by writing or rewriting with this product. -
Page 77: Before Writing Or Rewriting
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW or DVD-R/-RW/+R/+RW disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. - Page 78 ■ Data deleted (erased) from a CD-RW and DVD-RW/+RW disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive. ■...
-
Page 79: Writing Cd/Dvds On A Dvd Super Multi Drive And A Dvd Super Multi Drive Supporting Double Layer
DVD Super Multi drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product. -
Page 80: Before Writing Or Rewriting
Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. - Page 81 ■ You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. You cannot use a disc with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity. ■ Other DVD-ROM drives for computers or other DVD players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
-
Page 82: Recordnow! Basic For Toshiba
RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!. ■ DVD-Audio cannot be created using RecordNow!. ■ You cannot use RecordNow!'s "Audio CD for Car or Home CD Player" function to record music to the DVD-R/-RW or DVD+R/+RW disc. -
Page 83: Data Verification
3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW). -
Page 84: When Windvd Creator Platinum Is Used
When WinDVD Creator Platinum is used: You can record video back to your digital camcorder via i.LINK (IEEE1394) using WinDVD Creator Platinum. However, there is a case where its playback sound is choppy. 1. Click the Windows Start button and select the Control Panel option. 2. -
Page 85: Important Information For Use
Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use WinDVD Creator. ■ Make sure that your computer is running on AC power when using WinDVD Creator. - Page 86 2. Before recording the video to DVD ■ When you record to DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD. ■...
-
Page 87: Media Care
Media Care This section provides tips on protecting data stored on your CD/DVDs and diskettes. Handles your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: 1. Store your CD/DVDs in the container they came in to protect them and keep them clean. -
Page 88: Using The Internal Modem
1. Point to "All Programs", point to "TOSHIBA", point to "Networking" and click "Modem Region Select". Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. -
Page 89: Properties Menu
4. Select a region from the region menu or a telephony location from the submenu. ■ When you click a region it becomes the modem's region selection, and the New Location for telephony will be set automatically. ■ When you select a telephony location, the corresponding region is automatically selected and it becomes the modem's current region setting. -
Page 90: Dialing Properties
16-bit PC card, modem speed might be slow or communication might be interrupted. If modem speed is low or communication is interrupted when you are using modem, please check and set CPU speed to Maximum by TOSHIBA Power Saver utility. Disconnecting To disconnect the internal modem cable(optional), follow the steps below. -
Page 91: Lan
The computer is equipped with LAN circuits that support Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/ disconnect to a LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled. -
Page 92: Wireless Lan
TOSHIBA strongly recommend the customer to enable the WEP function. 2. TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Wireless communication switch You can enable or disable wireless LAN function, with the on/off switch. -
Page 93: Tv-Out
TV-Out Use the TV-Out jack to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B, Display Modes. Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. -
Page 94: Cleaning The Computer
If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable. -
Page 95: Chapter 5 The Keyboard
Satellite P30 Series The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with. -
Page 96: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features. -
Page 97: Hotkeys
Press Fn + Enter to simulate Enter on the enhanced keyboard's numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Fn + F1 Fn + F2 Fn + F3 Fn + F4 Fn + F5 Default resolution for simultaneous mode is set to XGA (1024x768). -
Page 98: Windows Special Keys
Change Resolution Cycles sequentially from the current resolution to 800x600 to 1024x768 and back again to the original resolution. TOSHIBA Zooming Utility (reduce) To reduce the icon size on the desktop or the application window, press 1 key while holding down teh Fn key. -
Page 99: Keypad Overlay
Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard in figure 5-2. -
Page 100: Temporarily Using Normal Keyboard (Overlay On)
Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off. 2. -
Page 101: Chapter 6 Power And Power-Up Modes
Satellite P30 Series Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a... -
Page 102: Power Indicators
User’s Manual Power on • Operates • LED: Battery off DC IN off • Operates • Alarm sounds (depending on the TOSHIBA Power Saver utility setting) • LED: Battery flashes amber DC IN off Computer goes into Hibernation or shuts down... -
Page 103: Dc In Indicator
DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Green No light Power indicator Check the Power indicator to determine the power status with the AC adaptor connected: Blue/Green Blinking amber No light Battery types The computer has two types of batteries:... -
Page 104: Battery Pack
Press <F1> to resume, <F2> to Setup The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. -
Page 105: Care And Use Of The Battery Pack
Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. - Page 106 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
-
Page 107: Charging The Batteries
6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Standby and Suspend will not function and data in memory will be lost. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries. -
Page 108: Battery Charging Notice
Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Battery pack RTC battery The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. -
Page 109: Monitoring Battery Capacity
Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver utility. Refer to Utilities in Chapter 1, Introduction. ■... -
Page 110: Maximizing Battery Operating Time
Maximizing battery operating time A battery's usefulness depends on how long it can supply power on a single charge. How long the charge lasts in a battery depends on: ■ How you configure the computer (for example, whether you enable battery power saving options). -
Page 111: Replacing The Battery Pack
6. Slide the battery latch to the right, then pull the battery out of the battery bay. For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. User’s Manual Removing the battery pack... -
Page 112: Installing The Battery Pack
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer. -
Page 113: Panel Power Off/On
Panel power off/on You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Standby or Hibernation mode but not in boot mode. If the panel power off function is enabled and you use Shut down Windows, do not close the display until the shut down function is completed. -
Page 114: Chapter 7 Optional Devices
Satellite P30 Series Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ PC cards ■ SD (Secure Digital)/MMC (MultiMediaCard)/SM (SmartMedia)/MS (Memory Stick)/MS Pro (Memory Stick Pro)/xD (xD-Picture Card) cards ■... -
Page 115: Pc Cards
The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC cards, including PC card 16's multifunction card and CardBus PC cards. -
Page 116: Removing A Pc Card
Optional Devices Removing a PC card 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click the PC card you want to remove. 3. Press the eject button of the PC card to extend it. 4. Press the extended eject button to pop the card out slightly. 5. -
Page 117: Sd/Mmc/Sm/Ms/Ms Pro/Xd Memory Cards
SD/MMC/SM/MS/MS Pro/xD Memory Cards The computer is equipped with a Multiple Digital Media Card Slot that can accommodate SD/MMC/SM/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash-memory. See below for the card capacities: Card Type MS Pro... -
Page 118: Installing An Memory Card
Installing an Memory card To install a memory card, follow the steps below. 1. Insert the memory card. 2. Press gently to ensure a firm connection. Be sure the memory card is oriented properly before you insert it. If Windows fails to read the memory card, remove it then reinsert it. ■... -
Page 119: Removing A Memory Card
Removing a Memory card To remove a memory card, follow the steps below. 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Stop a memory card device which you want to remove. 3. Grasp the card and remove it. ■... -
Page 120: Memory Card Care
CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. User’s Manual... -
Page 121: Installing Memory Module
Installing memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1. -
Page 122: Removing Memory Module
7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. 8. Seat the cover and secure it with two screws. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes. -
Page 123: Additional Battery Pack
5. Grasp the module and pull it out. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 6. Seat the cover and secure its screws. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs. -
Page 124: External Monitor
External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor's power on. 4. -
Page 125: Television
Television A television can be connected to the video out port on the computer. To connect a television, follow the steps below. 1. Turn the computer off. 2. Use a video cable (not supplied) to connect the television to the video out port. - Page 126 Optional Devices 4. Click the Advanced button and choose Displays 5. Click the TV button to open the TV Properties dialog box. 6. Adjust the TV properties accordingly User’s Manual 7-13...
-
Page 127: I.link (Ieee1394)
i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical media drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply. -
Page 128: Security Lock
Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. -
Page 129: Troubleshooting
Satellite P30 Series Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. -
Page 130: Preliminary Checklist
Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer. -
Page 131: Hardware And System Checklist
Software Hardware Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■ Self test ■ Power ■ Overheating power down ■ AC Power ■... -
Page 132: System Start-Up
If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally. -
Page 133: Power
Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply, Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. - Page 134 Replace it. If you do not think the battery is at the end of its operating life, see your dealer. Check the power consumption settings in the TOSHIBA Power Saver utility. Consider using a power saving mode.
-
Page 135: Keyboard
Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Some letter keys produce numbers. Output to screen is garbled. LCD panel Problem Lines appear broken. No display Problems above remain unresolved or other problems occur. -
Page 136: Hard Disk Drive
Hard disk drive Problem Computer does not boot from hard drive. Slow performance CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem You cannot access a CD/DVD in the drive. User’s Manual Procedure Insert a system diskette and reboot. There may be a problem with your operating system files. - Page 137 Region codes are listed in the Optical media section in Chapter 2, The Grand Tour. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
-
Page 138: Dvd±R/±Rw Drive (Dvd Dual Drive)
DVD±R/±RW drive (DVD Dual Drive) For more information, refer to Chapter 4, Operating Basics. Problem Some CD run correctly, but others do not. You cannot access a CD/DVD in the drive. User’s Manual Procedure The software or hardware configuration may be causing a problem. -
Page 139: Dvd Super Multi Drive
User’s Manual Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. - Page 140 Check the region code on the DVD. It must match that on the DVD±RW drive. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
-
Page 141: Diskette Drive
Diskette drive For more information on the diskette drive, refer to Chapter 2, The Grand Tour. For information on diskette care refer to Chapter 4, Operating Basics. Problem Some programs run correctly, but others do not. You cannot access the diskette drive probably causing the. -
Page 142: Memory Cards
Memory cards Refer also to Chapter 7, Optional Devices. Problem Memory card error occurs. Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touch pad Problem On-screen pointer does not respond to Pad operation. -
Page 143: Usb
USB mouse Problem On-screen pointer does not respond to Pad operation. Double-tapping does not work. The mouse pointer moves too fast or too slow. The mouse pointer moves erratically. Refer also to your USB device’s documentation. Problem USB device does not work. -
Page 144: Standby/Hibernation
Standby/Hibernation Problem The system will not enter Standby/ Hibernation. Real Time Clock Problem The following message is Displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent. Press [F2] key to set Date/ Time. User’s Manual Procedure Is Windows Media™... -
Page 145: Memory Expansion
Memory expansion Refer also to Chapter 7, Optional Devices, for information on installing memory modules. Problem The computer hangs up and issues beep sounds. (A long leep, three short beeps, three short beeps, and then a long beep.) Modem Problem Communication software can't initialize the modem. -
Page 146: Lan
Problem Character display becomes garbled during a communication. You cannot receive an incoming call. Problem Cannot access LAN LAN jack and the Wake up on LAN does not work. Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. -
Page 147: Monitor
Monitor Refer also to Chapter 7, Optional Devices, and to your monitor’s documentation. Problem Monitor does not turn No display Display error occurs. i.LINK (IEEE1394) Problem i.LINK device does not function. User’s Manual Procedure Make sure that the external monitor's power switch is on. -
Page 148: Toshiba Support
TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first. -
Page 149: Specifications
Satellite P30 Series Specifications This appendix summarizes the computer's technical specifications. Dimensions 420mm x 293mm x 39.9mm (Front)/47mm (Rear) Weight 4.3kg/9.49lbs (Actual weight may vary depending on configuration.) Environmental Requirements Conditions Operating Non-operating Conditions Operating Non-operating User’s Manual Appendix A Ambient temperature 5°C to 30°C -20°C to 65°C... - Page 150 Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialing Control command Monitor function Communication specifications Communication System Communication Protocol Communication Speed Error correcting Data compression User’s Manual Telephone line (analog only) Pulse Tone AT commands EIA-578 commands Computer's speaker Data:...
-
Page 151: Display Modes
Satellite P30 Series Display Modes This appendix contains a table listing all the display modes currently supported by the ATI Mobility Radeon graphics controller. CRT Display Resolution 800 x 600 1024 x 768 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 User’s Manual Appendix B... -
Page 152: Displaying Movies On A Tv Or Crt
Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor. Follow the steps below. 1. Open the Control Panel and click Appearance and Themes. 2. - Page 153 Display Modes 6. In the resulting properties box, if any additional options are available for your particular device, set then to your liking. User’s Manual...
- Page 154 Display Modes 7. Finally, click the ATI Overlay tab to adjust the video overlay properties. User’s Manual...
-
Page 155: Power Cable Connectors
Satellite P30 Series Power Cable Connectors The Satellite computer features a universal power supply you can use worldwide. This appendix shows the configuration of typical AC power cord plugs and sockets in various parts of the world. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe USA and Canada UL approved... -
Page 156: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased. -
Page 157: Toshiba Theft Registration
TOSHIBA Theft Registration Send to: Fax number: Country stolen: Machine type: (e.g. Satellite A50) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City: Country: Phone: Fax: User’s Manual... - Page 158 Satellite P30 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor...
- Page 159 RAM: random access memory ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array XGA: extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices.
- Page 160 cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
- Page 161 CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries.
- Page 162 floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
- Page 163 IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000;...
- Page 164 numeric keypad overlay: A feature that allows you to use certain keys on the keyboard to perform numeric entry, or to control cursor and page movement. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices.
- Page 165 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.