Table of Contents
Advertisement
Quick Links
QAS Nail Drag
Sand Pro
Model No. 08761—Serial No. 270000001 and Up
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
/Infield Pro
Figure 1
Figure 1
Register at www.Toro.com.
®
3040 and 5040 Traction Unit
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
g006212
Original Instructions (EN)
Form No. 3443-815 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
*3443-815*
Printed in the USA
All Rights Reserved
g000502
Advertisement
Table of Contents
Related Manuals for Toro 08761
Summary of Contents for Toro 08761
- Page 1 Whenever you need service, genuine Toro parts, or Safety-alert symbol additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 This manual uses 2 words to highlight information.
-
Page 2: Safety And Instructional Decals
Safety Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal106-5517 106-5517 1. Warning—do not touch the hot surface. - Page 3 Setup Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Nail drag Mount the nail drag. – No parts required Adjust the link assembly. – No parts required Grease the nail drag. Mounting the Nail Drag Adjusting the Link Assembly Note:...
-
Page 4: Operation
Greasing the Nail Drag Operation Before operating the nail drag, grease it; refer to Operating the Nail Drag Lubricating the Machine (page Important: Failure to properly grease the unit will • The amount the drag nails engage in the ground result in premature failure of critical parts. - Page 5 Inspecting and Cleaning the Nail Drag When the scarifying operation is completed, clean the machine thoroughly. Since this machine is used primarily in extremely abrasive conditions, the material should be flushed off after each use. If the machine is cleaned frequently, it can be cleaned with a stream of water from a hose with the nozzle removed.
-
Page 6: Maintenance
Maintenance Lubricating the Machine Service Interval: Every 100 hours The nail drag has bushings that must be lubricated regularly. The bushings are located in the frame hub; lubricate the grease fitting immediately after every washing, regardless of the interval listed. g006211 Figure 7 Greasing the Attachment Adapter... -
Page 7: Optional Equipment
Optional Equipment Quick-attach system groomer Model No. 08762 Automat kit (requires Model No. 08763 quick-attach system groomer kit, Model 08762) Manual drag mat kit Model No. 130-7852... - Page 8 Countries Other than the United States or Canada Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor's service or have difficulty obtaining guarantee information, contact your Authorized Toro Service Center.