Table of Contents
Advertisement
SETTING UP YOUR TV
To delete a transponder:
a
In the Transponder Settings menu, press
to highlight the line you want to delete.
b
Press the RED button.
To edit the Transponder Settings:
a
In the Transponder Settings menu, press
to highlight the line you want to edit and press OK.
b
C
c
Press
/
to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons and
c
Press OK to save your settings.
d
Repeat steps 1 through 3 for other lines.
e
Press the BLUE button to finish editing and return
to Satellite Settings.
Press the GREEN button to cancel any edits that
were made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.
To select the Dish Type:
a
In the Satellite Settings menu, press
select the required satellite line and press OK.
b
C
c
Press
/
to highlight Dish and press the
GREEN button.
Dish Settings
Dish : 1
Dish Type
c
c
B
b
Press
and
/
select Movable or Fixed as the Dish Type.
To select the LNB Settings:
a
In the Satellite Settings menu, press
select the required satellite line and press OK.
b
C
c
Press
/
to highlight LNB and press the
GREEN button.
LNB Settings
LNB : 1
Lower LOF
Upper LOF
B
B
B
b
/
if necessary.
B
b
/
to
Fixed
to select Dish Type. You can
B
b
/
to
9750
10600
c
B
Press
/
and use the number buttons (0-9) to input the
b
/
appropriate frequencies.
NOTE: As new services are broadcast, it will be necessary
to re-tune the television in order to view them.
b
/
Auto Tuning will completely re-tune the television and
can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be lost.
a
Press
icon.
b
c
Press
and
press OK.
c
B
Press
/
< Channel Tuning
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
A message will appear, and then press
select Yes and press OK.
d
c
Press
and
or ATV, if available, then highlight Start Scan and
press OK to continue with the Auto Tuning.
Auto Tuning - Antenna
Tuning Mode
NOTE: If you have selected Others for the
Country field in the Installation menu, and
selected a tuning mode other than DTV, choose
the optimum ATV broadcasting system (B/G, I, D/
K or L).
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning
screen will display the services found.
e
B
Press
/
channel and press OK to view.
22
b
to select Lower LOF or Upper LOF
Auto Tuning
B
b
and
/
to highlight Installation
B
b
/
to select Channel Tuning and
b
to select Auto Tuning and press OK.
B
b
/
to select DTV, DTV and ATV,
DTV
Start Scan
b
to move through the list to select a
C
c
/
to
DTV
DTV and ATV
ATV
Advertisement
Table of Contents
