Table of Contents
Advertisement
Notes
• If voice alert is actively linked with a different alarm
type while another voice alert is occurring, the first
voice alert is cancelled and the second one is output.
• When you play back a test, do not set Voice alert in
the Execution Condition tab of the Action output
menu to Off.
• If two or three audio files are set to be output
simultaneously linked with the same alarm type,
priority is given in the order Voice alert 1, 2 then 3.
OK/Cancel
See "Buttons common to every menu" on page 23.
HTTP alarm notification Tab
Set to notify a specified URL of an alarm when an event
is detected.
HTTP alarm notification 1, 2, 3
Set up to 3 recipients who you want to notify of the
alarm.
User name
Type the user name for authentication using up to 64
characters.
Password
Type the password for authentication using up to 64
characters.
Notification at the beginning of event detection
Select the checkbox for the alarm notification when the
event detection starts.
URL
Type the recipient of the alarm.
Test
If you click Execute, the alarm will be notified
manually regardless of whether an event is detected.
Notification at the end of event detection
Select the checkbox for the alarm notification when the
event detection ends.
Note
If the VMF, Camera tampering detection, Face
detection, Event condition are set as conditions for
executing HTTP alarm notification, the Notification
at the end of event detection cannot be set.
70
Setting the Action output — Action output Menu
URL
Type the recipient of the alarm.
Test
If you click Execute, the alarm will be notified
manually regardless of whether an event is detected.
Use Proxy
Select the check box if you use a proxy server.
Address
Type the address of the proxy server using up to
255 characters.
Port No.
Type the port number of the proxy server using up to
255 characters.
User name
Type the user name for proxy server authentication
using up to 64 characters.
Password
Type the password for proxy server authentication
using up to 64 characters.
OK/Cancel
See "Buttons common to every menu" on page 23.
FTP still image sending Tab
Set the items for the still file images that are recorded at
alarm detection or recorded periodically and sent to the
FTP server.
Notes
• While transferring the files with FTP still image
sending, the frame rate and operability of the main
viewer decrease.
• When the Image rotate in the Installation tab of the
System menu is set to 90 degrees or 270 degrees, the
still image becomes an image that does not rotate.
FTP server
Set the items for the FTP server where files will be sent.
Server name
Type the FTP server name of the FTP server where you
want to upload the files using up to 64 characters or type
the IP address of the FTP server.
User name
Type the user name for the FTP server using up to 64
characters.
Advertisement
Table of Contents
