SERVICE MANUAL
Ver. 1.2 2005.07
AUDIO POWER SPECIFICATIONS
For the U.S.A. model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohm loads, from 20 – 200 Hz; rated 800 watts, minimum RMS
power, with no more than 0.8 % total harmonic distortion from 250
milliwatts to rated output.
System
Type
Active Subwoofer, magnetically shielded (closed cabinet)
Speaker units
Woofer : 30 cm dia. (12 in.), cone type x 2
Continuous RMS output
North American model
(4 ohms/100Hz, 0.8%) : 1,000 W
European model (DIN 4 ohms/100Hz, 0.8%) : 1,000 W
Reproduction frequency range
20 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector
NORMAL, REVERSE
Mode selector
MOVIE, MUSIC
BASS-BOOST OFF, 1, 2
Sony Corporation
9-961-097-03
2005G02-1
Home Audio Group
© 2005.07
Published by Sony Engineering Corporation
SA-WX900
SPECIFICATIONS
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
North American model : 120 V AC, 60 Hz
European model : 220 – 240 V AC, 50 Hz
Other models : 220 – 240 V AC, 50 Hz
Power consumption
220 W
less than 0.5 W (Standby mode)
Dimensions
Approx. 440 x 550 x 620 mm
3
7
(17
/
x 21
/
x 24
8
8
Mass
48 kg (105lb 14oz)
Supplied accessories
Audio connecting cord
(1 phono plug – 1 phono plug) (1)
Speaker cords (2)
Spike
Design and specifications are subject to change without notice.
US Model
Canadian Model
AEP Model
UK Model
1
/
in.) (w/h/d)
2
ACTIVE SUBWOOFER