Miele DA424V Operating And Installation Manual
Ventilation system
Hide thumbs
Also See for DA424V:
- Operating and installation instructions (40 pages) ,
- Product dimensions (2 pages) ,
- Operating and installation instructions (36 pages)
Related Manuals for Miele DA424V
Summary of Contents for Miele DA424V
- Page 1 Operating and Installation Instructions Ventilation System DA 424 V en - US To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 07 261 690...
-
Page 3: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 4 Guide to the hood ..........8 Functional description . -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. - Page 5 However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements. WARNING - TO REDUCE THE RISK...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS , WARNING - TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. Always turn the hood on when cooking at high heat.
- Page 7 Installation , WARNING To reduce the risk of fire only use metal ductwork. Any fittings, sealant, or materials used to install the ductwork must be made of approved non-flammable materials. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood:...
-
Page 8: Guide To The Hood
Guide to the hood... - Page 9 a Cover frame b Telescopic chimney c Canopy The canopy is not designed to be used as a shelf. d Grease filter e Control panel f Overhead lighting g Light button This button turns the light on and off and also dims the light. h On/Off button i Fan power level buttons Four fan speed selection.
-
Page 10: Functional Description
Functional description The ventilation hood works by air extraction. The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 11: Operation
Turning on the fan ^ Press the On/Off button. The fan switches to level "2". The indicator light comes on. Select the power level ^ Use the buttons "– / +" to select the desired performance level. Button "+" = more power Button "–"... -
Page 12: Delayed Shut Down
Operation If the power level indicators "1" and "4" flash, the automatic switch back is not activated. ^ To activate the automatic switch back press the "+" button. The power level indicators "1" and "4" light continuously. ^ To deactivate press the "–" button. ^ To save the setting press the "Delay Shut Down"... -
Page 13: Turning The Lighting On/Off
Turning the lighting on/off The overhead lighting can be turned on and off independently of the fan. ^ Press the light button briefly to turn on the lighting. The light button indicator illuminates and the lighting comes on at maximum brightness. -
Page 14: Grease Filter Timer
Operation Grease filter timer A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation or the preselected time. The grease filter must then be cleaned. See "Cleaning and care / Grease Filter". After the grease filter has been cleaned and put back in place, the grease filter timer must be re-set. - Page 15 Reprogramming the grease filter timer The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying.
-
Page 16: Adjusting The Height Of The Canopy
Operation Adjusting the height of the canopy Be sure that no one is above or below the canopy while it is being adjusted. While the canopy is in motion refrain from using the cooktop until the hood is at the desired position. -
Page 17: Cleaning And Care
Before cleaning or servicing the hood, disconnect it from the power supply by either unplugging it from the outlet, manually "tripping" the circuit breaker or removing the fuse. Cleaning the casing Never use on the hood: - cleaning agents containing soda, acids, chlorides or thinners, - abrasive cleaning agents e.g. -
Page 18: Grease Filter
Cleaning and Care Grease filter The reusable metal grease filter removes solid particles from the vented kitchen air (grease, dust, etc). The grease filter should be cleaned every 3 - 4 weeks or whenever the grease filter indicator lights. Keep the grease filter clean to prevent a fire hazard. - Page 19 Cleaning the grease filter ^ By hand: use a scrub brush with a solution of warm water and mild detergent. Do not use the pure detergent, aggressive all purpose cleaners, oven sprays, abrasive cleaning agents or limescale removers. They could destroy the filter. ^ In a dishwasher: place the filter vertically in the lower basket, making sure that the spray arm is not...
-
Page 20: Changing The Light Bulbs
Cleaning and Care Changing the light bulbs Disconnect the exhaust hood from the power supply by either shutting off the main breaker or completely removing the fuse. When in use halogen bulbs become extremely hot, and can burn your hands. Do not attempt to change the bulbs until they have had sufficient time to cool. -
Page 21: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 23: Installation Instructions
Installation Instructions... -
Page 24: Caring For The Environment
Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. -
Page 25: Appliance Dimensions
Appliance dimensions Exhaust connection 6" (150 mm) diameter 1) Opening for ductwork and power cord... - Page 26 Appliance dimensions Distance between cooktop and hood (S) Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: - 22"...
-
Page 27: Structural Support
Structural support The ceiling mounting plate will support the weight of the hood. This ceiling plate must be attached to rigid structural framing that is supported in its entirety by the ceiling joists, or to the ceiling joists directly. Do not attach the plate directly to the ceiling with anchors, toggle bolts, etc. -
Page 28: Installation Accessories
Installation accessories Installation instructions ^ See the enclosed installation instruction sheet. ^ Please read the "Important Safety Instructions" and Installation Instructions before installing this hood. Installation accessories 4 screws (8 x 60 mm) with 4 washers for securing the ceiling plate. (the S10 wall anchors included in the packaging are NOT for use in the USA) 2 screws (M4 x 8 mm) for adjusting the... -
Page 29: Installation
Limiting the adjustable range You can use the limit switch to set the lower adjustable height range. This may be necessary if the safety clearance between the cooktop and the hood is too small when the canopy is lowered. You can use the limit switch to set the canopy so it cannot be lowered as far. - Page 30 Installation ^ Loosen the upper limit switch. dai2340 ^ To create a larger distance "S" from the cooking surface a, raise the canopy until the proper safety distance is reached. ^ Secure the limit switch opposite the guide on the chimney (see illustration).
-
Page 31: Air Extraction
" per foot (1 cm per meter) to prevent condensation dripping into the appliance. – If the exhaust is ducted through an outside wall, a Miele Telescopic Wall Vent can be used. -
Page 32: Condensate Trap
Air extraction – If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent... -
Page 33: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. WARNING: THIS APPLIANCE MUST BE... -
Page 34: Technical Data
Technical Data Total connected load ..580 W Fan motor ....350 W Height adjustment motor ..150 W Overhead lighting . - Page 36 Alteration rights reserved / 1508 M.-Nr. 07 261 690 / 00 For the most updated manual see the Miele web site.