The model number and serial number are on the back of your DVD Recorder. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this DVD Recorder. Model number: Serial number:...
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS WARNING: APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
Page 4
480 progressive scan output, it is recommended that the user switch the connection to the “standard definition” output. If there are questions regarding your TV set compatibility with this 480p DVD recorder, please contact Toshiba Customer Service. E7M70UD_D-R560KU_EN.indd 4 E7M70UD_D-R560KU_EN.indd 4 PRECAUTIONS...
Page 5
Maintenance Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 108-111 before returning the product. • If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product.
This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording This unit is compatible with recording on DVD-RW/+RW which are recordable repeatedly and DVD-R, DVD+R which accept the additional recordings until the disc becomes full but not overwritable.
Page 9
Discs for Recording, Playing back Disc type Logo Can be formatted in VR or video Format mode Video Mode Icon Maximum record 480 min (12cm) time 144 min (8cm) Ver.1.1,1.2 Recordable/playable Ver.1.1/2× CPRM compatible versions Ver.1.2/4× CPRM compatible Playable on most DVD players.
Page 10
DVD+R 4x/8x/16x, DVD+RW 4x DVD+R 4x/8x/16x Performance of any other discs are not guaranteed. • Toshiba is not liable for any damage or loss caused directly or indirectly by the malfunction of this recorder, including, without limitation, any one of the following: •...
FUNCTIONAL OVERVIEW Front Panel DVD -RW/R +RW/R RECORDING ON/STANDBY ( * ) The unit can also be turned on by pressing these buttons. 1. I/y ON/STANDBY button Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. Open the cover. Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment.
Page 13
FUNCTIONAL OVERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. INPUT SELECT button • Press to select the appropriate input. 2. OPEN/CLOSE A button* • Press to open or close the disc tray. 3.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
Page 15
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Title/File Name Information Title name information Title Name My Title File name information File Name My File MP3/WMA Tag Information • First, track name will be displayed. Track Name • If you press [DISPLAY] one more time, artist name will be displayed.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [ENTER] to display the menu. These menus provide entries to all main functions of the unit. Setup General Setting Timer Programming...
FRONT PANEL DISPLAY GUIDE : Appears in the afternoon with the clock display. 2. DTV : Appears when the channel is in DTV mode. 3. Title/Track and chapter mark : Appears when indicating a title/track number. : Appears when indicating a chapter number.
ANTENNA CABLE CONNECTION This section describes how to connect your unit to an antenna, cable box, etc. Disconnect the power cord of your TV from the AC outlet. Disconnect RF coaxial cable from antenna input jack of your TV. VHF / UHF antenna cable TV company...
RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.
CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. e.g.) satellite dish cable TV...
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your display device. analog audio rear of your TV audio cable this unit VIDEO VIDEO HDMI OUT COAXIAL AUDIO IN DIGITAL AUDIO OUTPUT S-VIDEO ANTENNA AUDIO OUT (L1) PCM / BITSTREAM...
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals. HDMI IN HDMI cable this unit HDMI OUT When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 21.
Page 23
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT Actual Output Modes by Media Audio recording format of the disc Dolby Digital DVD-video LPCM Dolby Digital DivX® MP3 / MP2 For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the “Dolby Digital” setting. If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select “Stream”...
CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the owner’s manual accompanying external devices for more information. Playing Back 2 Channel Analog Audio stereo system analog audio input jacks RCA audio cable VIDEO VIDEO...
INITIAL SETTING Turn on this unit for the first time, you need to follow these steps. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264...
CHANNEL SETTING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. Auto Channel Scan OPEN/ INPUT CLOSE SELECT HDMI .@/: .@/: PQRS PQRS WXYZ WXYZ SPACE SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU...
Adding/Deleting Channels You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channels is only available for the analog TV channels. Make sure • You perform “Auto Channel Scan” before adding or deleting the channels.
Page 28
ANALOG Select the channel number to add or delete. • Use [CH ] to cycle through only the memorized channels. • Use [{ / B] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly.
SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30. Auto Clock Setting This unit can set the time and date automatically by referring to a PBS station.
Manual Clock Setting Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. Use [K / L] to select “Clock”, then press [ENTER]. “Clock” menu will appear. Use [K / L] to select “Clock Setting”, then press [ENTER]. Use [K / L] to select calendar or time, then press [ENTER].
TUNER SETTINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. Note •...
This section describes how to switch the TV audio. When you record a TV program, only output sound channel will be recorded. Selecting TV Audio OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU ENTER CLEAR SKIP PAUSE...
Page 33
Selecting TV Audio (cont’d) OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 E7M70UD_D-R560KU_EN.indd 33 E7M70UD_D-R560KU_EN.indd 33 TUNER SETTINGS Analog TV Press [SETUP] and use [K / L] to select “General Setting”, then press...
DTV Closed Caption Apart from closed captions, Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER...
Closed Caption Style Digital TV can also change the style of its closed caption such as font, color or size, etc. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP...
Page 36
Use [K / L] to select the item and switch the setting for each item you want to set, then press [ENTER]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting”...
FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the unit.
Reformatting a Disc Manually If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc. OPEN/ INPUT CLOSE...
SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu” menu. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY...
PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. OPEN/ INPUT CLOSE SELECT HDMI...
PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back on other DVD players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization.
Page 42
PLAYING THE DISCS IN OTHER DVD PLAYERS Note • Finalizing a disc in video mode and +VR mode automatically creates a title menu. • After you finalize the DVD+RW, you can call up the title list by pressing [TOP MENU], or you can call up the title menu by pressing [MENU/LIST].
INFORMATION ON DVD RECORDING Recording Mode You can select a recording mode among 5 options, and the recording time will depend on the recording mode you select as follows. Recording time Recording mode 12cm 60 min 18 min 120 min 36 min 240 min 72 min...
SETTINGS FOR A RECORDING Make Recording Compatible Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title list is automatically converted to our style.
SETTINGS FOR A RECORDING Recording Audio Select (XP) You can enjoy high quality sound recording. This function works only when the recording mode is set at XP. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER].
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. OPEN/ OPEN/ INPUT CLOSE CLOSE SELECT HDMI .@/: .@/: PQRS PQRS WXYZ WXYZ SPACE SPACE DTV/TV DTV/TV SETUP DISPLAY DISPLAY TOP MENU ENTER CLEAR SKIP PAUSE PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY...
Page 47
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC I] to start recording. “I” will be displayed for 5 seconds. Press [PAUSE F] to pause recording. Press [PAUSE F] ] or [REC I] again to restart recording. To set one-touch timer recording (OTR)... This is a simple way to set the recording time in blocks of 30 minutes.
TIMER RECORDING You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Set the clock before setting a timer programming. • Insert a recordable disc with enough recordable space. OPEN/ OPEN/ INPUT...
Use [K / L] to enter the date, then press [B]. Timer Programming TUE JAN/01 10:00AM Date Start New Program Date Start JAN/02 - - : - - - - : - - Mode DTV125- 1 JAN/01 When pressing [L] at Daily the current date, the MON-SAT...
Page 50
How to select a channel number for the timer recording Analog TV For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number. Analog CATV For channel number 1-12, press [B] or [ –...
Page 51
Checking, canceling, or correcting the timer programming information 1) Press [I/y ON/STANDBY]. 2) Press [TIMER PROG.]. 3) Check the information on the list you want to edit. Timer Programming JAN/ 2/08 12:00 AM 125-01 SP SP (1:00) TUE JAN/01 10:00AM Date Start JAN/02...
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted or if a inserted disc is not recordable (finalized DVD-RW/-R, finalized DVD+RW, a fully recorded disc, etc.), flashes and timer recording cannot be performed.
SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 and DV IN(L3) (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection.
SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 53. OPEN/ OPEN/ INPUT INPUT CLOSE SELECT HDMI CLOSE SELECT .@/: .@/: PQRS WXYZ PQRS WXYZ SPACE SPACE...
Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to DVD. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode.
DVC to DVD Dubbing Before recording from DVC, see page 53 for connection instructions. OPEN/ INPUT INPUT CLOSE SELECT SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PAUSE PLAY PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE...
Page 57
Press [PLAY B] to find the point where you wish to start dubbing. Then, press [STOP C] where you wish to start dubbing. Use [K / L] to select “Start Rec”, then press [ENTER]. The dubbing will start. To stop dubbing; Use [K / L] to select “Control”, then press [ENTER].
INFORMATION ON PLAYBACK Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. Data disc contains MP3/WMA/JPEG/DivX® are divided into folders, and the folders are subdivided into files. DVD video Title 1 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3...
BASIC PLAYBACK Direct Playback OPEN/ OPEN/ INPUT CLOSE CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU ENTER CLEAR SKIP PAUSE PLAY PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Note • Some discs may start playback automatically. E7M70UD_D-R560KU_EN.indd 59 E7M70UD_D-R560KU_EN.indd 59 Press [I/y y ON/STANDBY].
Playback from the Title List OPEN/ OPEN/ INPUT CLOSE CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU TOP MENU ENTER ENTER CLEAR SKIP SKIP PAUSE PLAY PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Note •...
Page 61
Use [K / L / ] to select a desired title, then press [ENTER]. e.g.) VR mode DVD-RW original Title List JAN/ 1/08 12:00AM CH10 SP 12:00AM (0:12:00) JAN/ 1/08 CH10 SP Use [K / L] to select “Play From Start”, then press [ENTER].
Use of CD-RW for MP3 files is not recommended. You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such 1/ 2 permission. : 44.1 kHz or 48 kHz.
Playing Back a DivX® OPEN/ OPEN/ INPUT CLOSE CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 E7M70UD_D-R560KU_EN.indd 63 E7M70UD_D-R560KU_EN.indd 63 BASIC PLAYBACK Follow steps 1 to 2 in “Direct...
Page 64
It is recommended that files to be played back in this unit are recorded under the following specifications: Official DivX® Certified product • Playable codec of AVI files : DivX®3.x, DivX®4.x, DivX®5.x, DivX®6.0 • Maximum size of image : 720 x 480 @30 fps 720 x 576 @25 fps •...
Using the Title/Disc Menu DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. 1) Press [TOP MENU] or [MENU/LIST] to call up the title list or disc menu.
SPECIAL PLAYBACK Resume Playback You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last.
Rapid Playback Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound output. 1) During playback, press [1.3X / 0.8X PLAY]. B x0.8 : Press [1.3X / 0.8X PLAY] once during playback.
Zoom 1) During playback, press [DISPLAY] or [ZOOM]. • If you press [ZOOM], skip to step3. 2) Use [{ / B] to select , then press [ENTER] within 1 second, or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5...
Chasing Playback during Recording You can play back the already recorded part of the currently recording program without waiting for the recording to the end. This function works from 1 minute after the start of the recording. 1) During recording, press [PLAY B]. Playback will start from the beginning of the program that you are currently recording.
Simultaneous Playback and Recording You can also play back a recorded title during current recording or the timer recording on the same disc. 1) During recording, press [DISPLAY]. Screen for the current recording: 1:23:45 icon using [{ / B], then press [ENTER]. 2) Select The title number next to will be highlighted.
Title/Chapter Search Using [SKIP ] / [SKIP 1) During playback, press [SKIP i ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped.
Time Search • For audio CD, skip to step 2. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [ENTER]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 The number next to will be highlighted.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Repeat Playback Available repeat function may vary depending the discs. • For audio CD, MP3, or WMA, skip to step 2, or press [REPEAT] and skip to step 3. 1) During playback, press [DISPLAY] or [REPEAT]. • If you press [REPEAT], skip to step3. 2) Use [{ / B] to select , then press [ENTER] within 1 second, or wait for 1 second to display the...
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Program Playback You can program the disc to play back in your desired order. 1) Press [SETUP] in stop mode. 2) Use [K / L] to select “CD Playback Mode”, then press [ENTER]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [ENTER].
SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles DVD-video may have subtitles in one or more languages. Available subtitle languages can be found on the disc case.
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. • For audio CD, MP3 or WMA, skip to step 2. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [ENTER] within 1 second, or wait for 1 second to display the...
SELECTING THE FORMAT OF AUDIO AND VIDEO Adjusting Black Level You can adjust the black level to control the brightness of the picture in order to get a better picture. 1)During playback, press [DISPLAY]. 2) Use [{ / B] to select .
INFORMATION ON DISC EDITING Guide to a Title List Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU].
DELETING TITLES After the disc is fully recorded: DVD-RW/DVD+RW • When a title is deleted from DVD-RW in VR mode, the recordable disc space will be increased. The Full-Recorded disc Delete! You can record a new title. Once all editings are made, press [RETURN] several times to exit the editing mode. “Writing to Disc” appears momentarily.
Page 80
You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read “Notes for deleting titles” on page 79 before you delete the title. OPEN/ INPUT CLOSE...
CREATING/DELETING PLAYLIST Adding Titles to a Playlist Playlist For VR mode DVD-RW, you can create the playlist as you wish. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 chapters).
CREATING/DELETING PLAYLIST Erasing All Playlist Playlist A playlist can be deleted if it is no longer needed. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE...
Putting Names on Titles You can put a name on the disc and change it from this menu. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU TOP MENU MENU/LIST MENU/LIST ENTER ENTER CLEAR SKIP PAUSE PLAY In stop mode, press [TOP MENU].
Page 84
Putting Names on Titles (cont’d) OPEN/ INPUT CLOSE SELECT HDMI .@/: .@/: PQRS PQRS WXYZ WXYZ SPACE SPACE DTV/TV SETUP DISPLAY TOP MENU ENTER ENTER CLEAR CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 E7M70UD_D-R560KU_EN.indd 84 E7M70UD_D-R560KU_EN.indd 84 EDITING DISCS...
Setting Chapter Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP...
Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. OPEN/ INPUT HDMI CLOSE SELECT .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU TOP MENU ENTER ENTER CLEAR SKIP SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE...
Deleting a Part of a Title Original Playlist You can delete a specific part of a title. Even when parts of title are deleted from the playlist, the original title will remain as it is. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ...
Page 88
Deleting a Part of a Title (cont’d) Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the start point, then press [ENTER]. Edit - Scene Delete Start Preview Delete JAN/ 1/08 12:00AM CH10 LP 1 : 25 : 47 Then use [SKIP H / G], [REV E], [FWD D], [PLAY B] and...
Dividing a Title Playlist You can divide one title into two new titles. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU TOP MENU ENTER ENTER CLEAR SKIP SKIP PAUSE PAUSE PLAY PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE...
Combining Titles Playlist You can combine two titles into a single title. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Note •...
Setting or Releasing the Title Protection Original To prevent the accidental editing, or erasing of the titles, you can protect them in “Edit” menu. You can cancel the title protection feature after it is applied. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ...
Setting or Clearing All Chapter Marks at Once For titles in video mode DVD, you can set or edit chapter at every time interval. You can clear the chapter mark too. You can specify the interval of chapter marks for titles last more than 5 minutes.
LIST OF THE DEFAULT SETTINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) Playback Parental Lock → page 97 Audio Out Dynamic Range Control →...
Page 94
LIST OF THE DEFAULT SETTINGS Setup Items (highlight is the default) Display CC Style Font Opacity → page 36 Font Color → page 36 Edge Type → page 36 Edge Color → page 36 Back Opacity → page 36 Back Color →...
Page 95
LIST OF THE DEFAULT SETTINGS Setup Items (highlight is the default) Video TV Aspect → page 103 Select Video L1(Rear) → page 53 L2(Front) Recording Auto Chapter → page 44 Recording Audio Select (XP) → page 45 Auto Disc Full Finalize →...
GENERAL SETTING Playback OPEN/ OPEN/ INPUT CLOSE CLOSE SELECT HDMI .@/: .@/: PQRS PQRS WXYZ WXYZ SPACE SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 E7M70UD_D-R560KU_EN.indd 96 E7M70UD_D-R560KU_EN.indd 96...
Page 97
Playback (cont’d) Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
Playback (cont’d) Audio Out Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [K / L] to select a desired item, then press [ENTER]. General Setting Playback Display Parental Lock Video Audio Out Audio Out Recording Disc Menu Language...
Page 99
Playback (cont’d) Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a language, then press [ENTER]. General Setting Playback Display Parental Lock Video Audio Out Disc Menu Language Recording Disc Menu Language English Clock Audio Language...
Display OPEN/ INPUT CLOSE SELECT HDMI .@/: .@/: PQRS PQRS WXYZ WXYZ SPACE SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].
Page 101
Display (cont’d) V-Chip With the v-chip system in this unit, you can set the viewing limitation for the analog/digital TV programs received from the tuner or recorded on DVDs to prevent your children from watching inappropriate programs. If the unit detects a blocked program, a restriction message appears and you are not allowed to view the program.
Page 102
Display (cont’d) [Canadian English Rating] Rating Category Adult audience only Unsuitable for ages under 14 Parental guidance suggested General audience For children over 8 For all children Exempt program As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming.
Video OPEN/ INPUT HDMI CLOSE SELECT .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].
DivX® OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [ENTER].
HDMI OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 E7M70UD_D-R560KU_EN.indd 105 E7M70UD_D-R560KU_EN.indd 105 GENERAL SETTING Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [ENTER].
Page 106
HDMI (cont’d) HDMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUTPUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [K / L] to select a setting, then press [ENTER].
Reset All Reset the setting to default. OPEN/ INPUT CLOSE SELECT HDMI .@/: PQRS WXYZ SPACE DTV/TV SETUP SETUP DISPLAY TOP MENU ENTER ENTER CLEAR SKIP PAUSE PLAY TIME SLIP 1.3x / 0.8x PLAY REPEAT REC MODE SE-R0264 Note • The settings listed below will remain unchanged even after resetting to the factory default.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Power The power does not turn on.
Page 109
Symptom Playback The disc cannot be played back. Playback image freezes for a second. The disc does not start playback from the beginning. The unit starts playing back the disc automatically. Some functions such as stop, search, or slow-motion playback cannot be performed.
Page 110
Symptom DV signal cannot be input. The DVC cannot be operated with this unit. Certain functions of the unit cannot operate. DV audio signal cannot be switched. HDMI No image from HDMI connection. There is no sound or the sound is distorted.
Error message Disc Error — Please eject the disc. — Playback feature may not be available on this disc. Region Error — Please eject the disc. — Playback is not authorized in your region. Parental Lock On The current selected parental level prohibits playback.
Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square);...
SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. General System Power requirements Power consumption Weight Dimensions (width x height x depth)
Digital Audio Video (“DAV”) Product - Exchange Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
Page 116
116 EN 116 EN E7M70UD_D-R560KU_EN.indd 116 E7M70UD_D-R560KU_EN.indd 116 LIMITED WARRANTY 2007/12/17 11:13:27 2007/12/17 11:13:27...