hit counter script
Toshiba RemotEye ESS Instruction Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Storage
  5. RemotEye ESS
  6. Instruction manual
Toshiba RemotEye ESS Instruction Manual

Toshiba RemotEye ESS Instruction Manual

Energy storage system network card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RemotEye® ESS
Energy Storage System
Network Card
Instruction Manual
Document Number: 201791-002
July 2021

Advertisement

Table of Contents
loading

Related Manuals for Toshiba RemotEye ESS

Summary of Contents for Toshiba RemotEye ESS

  • Page 1 RemotEye® ESS Energy Storage System Network Card Instruction Manual Document Number: 201791-002 July 2021...
  • Page 3 Should further information be required or should particular problems arise which are not covered sufficiently the matter should be referred to the local TOSHIBA sales office. Nothing in this manual shall alter Toshiba International Corporation’s standard terms and conditions or the conditions of any written sales contract.
  • Page 4 TOSHIBA shall not be liable for technical or editorial omissions or mistakes in this manual. Nor shall it be liable for incidental or consequential damages resulting from the use of information contained in this manual.

  • Page 5: Table Of Contents

    Step 1: Ensure SCiB Cabinet and Network Connection ..................4 Step 2: Locate the RemotEye® ESS IP Address ....................5 Step 3: First Time Setup ............................7 Step 4: Establish Communication between SCiB ESS and RemotEye ESS ............8 ® RemotEye ESS Web Application Dashboard ..........................
  • Page 6 Manual Upgrade ..............................31 Setup Port (mini-USB port) Frequently Asked Questions Appendix A Technical Information Modbus Register Table ......................35 LED Definition .......................... 74 RemotEye ESS Technical Specification .................. 75 RS-485 Technical Specification ....................75 RemotEye® ESS Instruction Manual – 201791-002...

  • Page 7: Electronic Emission Notice Federal Communications Commission (Fcc)

    Electronic Emission Notice Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 8: Introduction

    Thank you for your purchase of a Toshiba Energy Storage System (ESS) device. RemotEye® ESS is a network card designed for Toshiba's SCiB ESS. It receives the status and data from the SCiB ESS host board to provide it to other systems. This data can be transmitted to other systems, such as building management systems via Modbus TCP/RTU, SNMP, and BACnet/IP protocols for trending and events monitoring.

  • Page 9: Package Contents

    Package Contents Carefully check the RemotEye® ESS package and the included accessories to ensure that all items are present and undamaged.  RemotEye® ESS Device  Mini USB Cable (USB A to USB Mini-B)  ESS Communication Cable  Power Cable and Adapter ...

  • Page 10: Rs-485 Wiring

    RS-485 Wiring Input Output Voltage Signals Voltage Range Range Signal Ground Signal Ground – (Negative) -7 to 12V 0 to 5V + (Positive) -7 to 12V 0 to 5V Setup Ensure Communication Connections Installation of the RemotEye® ESS on SCiB ESS must be completed by a trained technician. The below instructions provide an overview of RemotEye®...

  • Page 11: Step 2: Locate The Remoteye® Ess Ip Address

    Insert the RemotEye® ESS start-up CD into your computer and locate the Tupgrade application found in the "Upgrade" folder. If a CD reader is not available go to "www.ToshibaUPS.com > Toshiba RemotEye ESS > View Technical Downloads > Software > Toshiba RemotEye Firmware Upgrade Utility (Tupgrade) Version X.XX"...
  • Page 12 List of RemotEye® units on Network: RemotEye® Edit Window: Selected RemotEye® ESS Instruction Manual – 201791-002...

  • Page 13: Step 3: First Time Setup

    Selected RemotEye® Set IP Window Step 3: First Time Setup 1. Launch your web browser and enter your RemotEye ESS’s IP Address into the search bar or select a RemotEye and click “Browse” within Tupgrade 2. Enter the default username: TOSHIBA and password: ADMIN to login and start the First-Time Setup process.

  • Page 14: Step 4: Establish Communication Between Scib Ess And Remoteye Ess

    3. Follow the instructions on the First-Time Setup page on the web application to complete the first-time setup process. Step 4: Establish Communication between SCiB ESS and RemotEye ESS a) After the first-time setup, log in again to become an administrator (login with the credentials created in the first time setup).
  • Page 15 SCiB ESS. If there is a communication issue, there will be a "Connection Lost" pop-up. If this is the case, please check the communication cable between RemotEye ESS and the ESS cabinet and make sure they are securely connected.
  • Page 16 RemotEye® ESS Instruction Manual – 201791-002...

  • Page 17: Remoteye ® Ess Web Application

    ® RemotEye ESS Web Application Dashboard After the first-time setup is completed, the first page that comes up when logged in or users visit the RemotEye® ESS web application is the "Dashboard" page. Navigation bar The navigation bar displays the basic information such as the current page, the ESS ID number, and RemotEye®...

  • Page 18: Sidebar And Pages Description

    Sidebar and Pages Description The sidebar displays the list of all of the web pages. Click on the name of a page to access it. Pages Description Dashboard This page provides an overview of the ESS data. This page provides basic information about the General Info cabinet.

  • Page 19: Settings

    ESS. (Max logs: 1024) EMD General Log By default, it is set to record data every minute. Thus, it provides up to 2d 20h 16m 0s worth of data. The polling rate can be customized for a longer period. (Max Logs: 4096) EMD General Extended By default, it records in one-hour intervals.

  • Page 20: Configuring Settings With Web Browser Initial Configuration

    SNMP, Modbus, BACnet, HTTP, Email Server Notification Email Notification, SNMP Traps Receivers, Reminders Security Timer, RADIUS, Authentication Method, Firewall, HTTPS Toshiba Monitoring TMS Setup Request Form, IoT Server Settings System General About, Profile, Other User Profiles, Firmware Update, History Logs Sample Rate, Reset System Current Time &...

  • Page 21: Modbus Setup

    5. Enter Subnet. 6. Click "Save" to save the settings, enter the new IP address in your web browser, re-login as administrator, and go to the "Settings" page to continue. 7. Go to "Current Time & Date" within the "System" menu to configure the appropriate date and time information.

  • Page 22: Modbus Rtu Setup

    Modbus RTU Setup: 1. Login to become an administrator and go to the settings page by clicking the "gear" icon on the top navigation bar. 2. Go to “Modbus Settings” within the “Protocol" menu to set up Modbus settings. 3. Toggle "Modbus RTU Protocol" to "Enabled "(toggle should point to the right). 4.

  • Page 23: Bacnet/Ip Setup

    BACnet/IP Setup BACnet/IP Protocol is supported in firmware version v2.2.4.16 and above. The following will help you set up your RemotEye® ESS to communicate with another system via BACnet/IP. BACnet/IP Setup: 1. Login to become an administrator and go to the settings page by clicking the "gear" icon on the top navigation bar.

  • Page 24: Toshiba Monitoring Service Setup

    Toshiba Monitoring System (TMS) is a monitoring service that allows Toshiba experts to monitor your SCiB ESS 24/7. If interested go to "Toshiba Monitoring Service" within the "Settings" menu and fill in the required information. After submitting the form a TMS representative will call you to setup the service.

  • Page 25: Mqtt Settings Setup

    MQTT Settings Setup This settings page allows connectivity to the TMS monitoring service. Once you have received two files from a TMS agent, go to the "Upload" tab of the "IoT Server Settings" section within the "Settings/Toshiba Monitoring System" menu.

  • Page 26: Snmp Setup

    SNMP Setup SNMP Protocol is supported in firmware version v2.2.4.16 and above. SNMPv1/v2c and SNMPv3 are enabled by default. To change the default configurations, follow the below steps. 1. Login to become an Administrator and go to the settings page by clicking the "gear" icon on the top navigation bar.

  • Page 27: Https Setup

    Note: The RemotEye® ESS can only store up to 8 SNMPv3 usernames. 6. Select the trap type. The setting options are "None" and "TOSHIBA". If "None" is selected, traps are not sent. If "TOSHIBA" is selected, traps are received based on the Toshiba mib.

  • Page 28: Self-Signed Ssl

    Self-Signed SSL Click on the "Self-Signed SSL" tab of the "HTTPS" section and follow the steps to generate a new self- signed certificate. Custom SSL Click on the "Custom SSL" tab of the "HTTPS" section and follow the steps and the user guide page's example to create a custom SSL certificate.

  • Page 29: Date & Time Setup

    This section allows enabling/disabling network-specific protocols. To access this section, login as an administrator and go to the "Settings/System" page. SSH – This allows access to the RemotEye ESS console menu via SSH. Network Upgrade - This allows the user to perform a firmware upgrade via the network. For more details on performing firmware upgrade, go to "Firmware Upgrade"...

  • Page 30: Profile

    This enables/disables the "Guest Mode" button on the login screen. If enabled, it allows any user to login with read-only access. (Default: Enabled). Login Screen This setting allows administrators to enable/disable the login screen. If disabled, any user will be routed inside the RemotEye ESS with read-only access. (Default: Enabled) RemotEye® ESS Instruction Manual – 201791-002...

  • Page 31: About

    The temperature unit set will be reflected in all the temperature-based parameters. Once changes are made, click the "Save" button to save. It also allows the user to view the communication settings and status between RemotEye ESS and the SCiB ESS cabinet.

  • Page 32: Configuring Emd With Web Browser Initial Configuration

    Configuring EMD with Web Browser Initial Configuration The following will help you setup and configure the optional environmental sensor (EMD). The EMD device allows the user to monitor environmental temperature and humidity. It also has the ability to add two additional sensors that can be connected to its two digital inputs.

  • Page 33: Temperature Thresholds Settings

    4. If successful, the temperature and humidity will update shortly on the "Monitoring" page under the "Environmental Device" located in the side menu. Temperature Thresholds Settings The RemotEye® ESS allows users to configure temperature alarms to alert you whenever a temperature threshold has been reached.

  • Page 34: Humidity % Thresholds Settings

    Warning (High) Enter the threshold when you want to be notified when temperature is getting close to critical high level. This value has to be lower than critical high setting. Temperature Calibration Offset This allows you to calibrate the EMD temperature sensor. Humidity % Thresholds Settings The RemotEye®...
  • Page 35 RemotEye® ESS Instruction Manual – 201791-002...

  • Page 36: Firmware Upgrade

    "System/Network" menu and enable "Network Upgrade" function. 2. Open Tupgrade application and click on the Discover icon. If no RemotEye ESS auto populates on the list click on the "+" icon and enter the IP, username, and password. If it still does not work, please check with your network administrator to make sure that TFTP is allowed over the network.

  • Page 37: Web Procedure

    Automatic Upgrade Go to the "Firmware Update" section within the "Settings/General" menu. 2. Click on the "Check" button to check for the Toshiba server's latest firmware. (This function requires internet access) 3. If there is a new firmware, click on the "Upgrade" button to proceed with the firmware update.

  • Page 38: Setup Port (Mini-Usb Port)

    Setup Port (mini-USB port) RemotEye® ESS provides the ability to connect to its console to allow device configuration. This will allow you to have access to the RemotEye® ESS network settings. In order to successfully connect to the RemotEye® ESS device, a Windows OS workstation with internet access is required. Connect to PC 1.
  • Page 39 5. Type in the Default Username (if not previously changed): TOSHIBA and Password: ADMIN and press Enter. 6. Once logged in successfully all the settings are available configure. RemotEye® ESS Instruction Manual – 201791-002...

  • Page 40: Frequently Asked Questions

    2. Remove the four Phillips screws under the RemotEye ESS and open the case. 3. Power the RemotEye ESS with the supplied AC/DC power adapter, and wait 1 minute so that it fully boots up. 4. Then press and hold the "Reset" pin button for 10 seconds. The "Reset" pin button location is depicted in the picture below with the "C"...

  • Page 41: Appendix A Technical Information

    Appendix A Technical Information Modbus Register Table All registers are 16-bit in size with read-only access. The data is stored on the "Read Holding Registers" table. To access the data it requires to use "03" function code. The max request allowable per query is 100 registers with 500ms delay between polls. *SCiB gives temperature data in Celsius.
  • Page 42 1: true, 0: 1: true, 0: 1: true, 0: 1: true, 0: false false false false false false false false RemotEye ESS Real & SCiB ESS ESS In Fully 40800 Reserved Comm Status ESS In Fault Unknown Charging Discharging Low Battery...
  • Page 43 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 LED status Green LED Amber LED Red LED Bit 3 and Bit 2: Bit 5 and Bit 4:...
  • Page 44 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Right string charge Real 40036 x0.01 Amps Right string current value in the charge direction is indicated by 0.01A/LSB (655.35A to 0A) current...
  • Page 45 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 1 Module 1 40087 x0.001 Volts Time...
  • Page 46 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 2 Module 2 40109 x0.001 Volts Time...
  • Page 47 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 3 Module 3 40131 x0.001 Volts Time...
  • Page 48 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 4 Temperature Module 4 40153 Time Unit...
  • Page 49 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 5 Temperature Module 5 40175 Time Unit...
  • Page 50 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 7 Module 7 40197 x0.001 Volts Time...
  • Page 51 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 8 Module 8 40219 x0.001 Volts Time...
  • Page 52 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 9 Module 9 40241 x0.001 Volts Time...
  • Page 53 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 10 Temperature Module 10 40263 Time Unit...
  • Page 54 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 12 Module 12 40285 x0.001 Volts Time...
  • Page 55 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 13 Module 13 40307 x0.001 Volts Time...
  • Page 56 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 14 Module 14 40329 x0.001 Volts Time...
  • Page 57 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 15 Temperature Module 15 40351 Time Unit...
  • Page 58 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 16 Temperature Module 16 40373 Time Unit...
  • Page 59 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 18 Module 18 40395 x0.001 Volts Time...
  • Page 60 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 1 Module 1 40417 x0.001 Volts Time...
  • Page 61 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 2 Module 2 40439 x0.001 Volts Time...
  • Page 62 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 3 Temperature Module 3 40461 Time Unit...
  • Page 63 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 5 Module 5 40483 x0.001 Volts Time...
  • Page 64 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 6 Module 6 40507 x0.001 Volts Time...
  • Page 65 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 7 Module 7 40529 x0.001 Volts Time...
  • Page 66 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 8 Temperature Module 8 40551 Time Unit...
  • Page 67 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 9 Temperature Module 9 40573 Time Unit...
  • Page 68 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 11 Module 11 40595 x0.001 Volts Time...
  • Page 69 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 12 Module 12 40617 x0.001 Volts Time...
  • Page 70 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 13 Module 13 40639 x0.001 Volts Time...
  • Page 71 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 14 Temperature Module 14 40661 Time Unit...
  • Page 72 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 16 Module 16 40683 x0.001 Volts Time...
  • Page 73 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 17 Module 17 40705 x0.001 Volts Time...
  • Page 74 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Module 18 Module 18 40727 x0.001 Volts Time...
  • Page 75 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real 41004 x0.001 Volts Module 5 Voltage Module 5 Voltage Time Real...
  • Page 76 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Module 9 Average Real Temperature 41026 Module 9 Average Temperature Temperature...
  • Page 77 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real 41048 x0.001 Volts Module 13 Voltage Module 13 Voltage Time Real...
  • Page 78 (1 active, 0 inactive) inactive) inactive) inactive) inactive) inactive) inactive) inactive) RemotEye ESS Info Registers Software Version 41200 Config Major Number Minor Number (Major and Minor) Software Version 41201 Config Maintenance Number (Maintenance) Software Version 41202 Config...
  • Page 79 Name Type Units* Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Real Number of Outages 41251 Number of Outages Time Average System...

  • Page 80: Led Definition

    LED Definition The function of the RemotEye® ESS is indicated by the Status/EMD and Network LEDs, as listed in the following tables. Port Green LED Yellow LED Function Network Flashing Ethernet 100 Traffic Flashing Ethernet 10 Traffic 100 Base‐TX Ready 10 Base‐T Ready Ethernet Disconnection Status/...

  • Page 81: Remoteye Ess Technical Specification

    RemotEye ESS Technical Specification Function Description Dimension(L x W x H mm) 94 x 82 x 30.8 mm ‐20 ~ 40°C Operating Temperature Operating Humidity 10 ~ 80 % (Non‐condensing) EMC Regulation CE, FCC Class B RS-485 Technical Specification Cable type: Bidirectional communication possible over a single pair of twisted cables (AWG 16-26).
  • Page 82 RemotEye® ESS Instruction Manual – 201791-002...
  • Page 83 This Page Left Intentionally Blank RemotEye® ESS Instruction Manual – 201791-002...
  • Page 86 SOCIAL INFRASTRUCTURE SYSTEMS GROUP POWER ELECTRONICS DIVISION 13131 West Little York Rd., Houston, TX 77041 Tel: 855-803-7087 Fax 713-896-5212 US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204 www.toshibaups.com...

Table of Contents