6-3.
Items and Description of Service Mode Menu
1)
When the key "1" is pressed down, the monitor display moves
to the Version No. check menu screen.
2)
When the key "2" is pressed down, the monitor display moves
to the Display Color check menu screen.
3)
When the key "3" is pressed down, the monitor display moves
to the Total Time check menu screen.
4)
When the key "4"is pressed down, the monitor display moves
to the Error History check menu screen.
5)
When the key "5" is pressed down, the monitor display moves
to the Command History check menu screen.
6)
When the key "6" is pressed down, the monitor display moves
to the History Clear check menu screen.
7)
When the key "7" is pressed down, the monitor display moves
to the Factory Set Up check menu screen.
8)
When the key "8" is pressed down, the monitor display moves
to the Device Check menu screen.
9)
Key "9" is not used.
0)
When the key "0" is pressed down, the monitor display moves
to the G-code Setting menu screen.
6-4.
Device Check Menu (Diagnostic Test)
1)
Key "1" is not used.
2)
When the key "2" is pressed down, the Super AND device check
will be executed. (The Super AND device is checked whether
it is mounted or not, and the I2C communication between Rism3
(IC103) and Super AND is checked.)
3)
Key "3" is not used.
4)
When the key "4" is pressed down, the DDR Data device check
will be executed. (The DDR device is checked whether it is
mounted or not, and the electrical signal connection between
Rism3 (IC103) and DDR device is checked.)
5)
When the key "5" is pressed down, IC603 of the AV board will
be patched.
(Never press the key "5" unless otherwise specified.)
Check result display: IC105 check result/IC106 check result
Display Message
Meaning of Display
DATA OK/OK
Both IC105 and IC106 are OK.
DATA OK/NG
IC105: OK, IC106: NG
(NG: No Good)
DATA NG/OK
IC105: NG, IC106: OK
DATA NG/NG
Both IC105 and IC106 are NG.
All manuals and user guides at all-guides.com
6-3
<< MAIN MENU >>
1) Version No.
2) Display Color
3) Total Time
4) Error History
5) Command History
6) History Clear
7) Factory Set Up
8) Device Check
9) HDD MODE
t Not used
0) G-code Setting
MODEL
***
SYSCON Version [
]
***
HDD Serial ID [
]
***
Sony ID [
***
]
<< Device check >>
1) EEPROM Check
2) Super AND Check
3) Video Dec Device Check
4) DDR Date Check
5) IT Setting
t Not used
t Not used