hit counter script
Sony RDR-GX330 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. RDR-GX330 - DVD Recorder With TV Tuner
  6. Service manual

Sony RDR-GX330 Service Manual

Hide thumbs Also See for RDR-GX330:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
System
Laser: Semiconductor laser
Channel coverage:
NTSC
VHF: 2 to 13
UHF: 14 to 69
CATV: A-8 to A-1, A to W, W+1 to
W+84
Video reception: Frequency synthesizer
system
Audio reception: Inter carrier system
Antenna: 75-ohm antenna terminal for
VHF/UHF
Timer: Clock: Quartz locked/Timer
indication: 12-hour cycle (digital)/
Power back-up duration: 1 hour
Video recording format: MPEG-2,
MPEG-1
Audio recording format/applicable
bit rate: Dolby Digital 2 ch
256 kbps/128 kbps (in EP and SLP
mode)
All manuals and user guides at all-guides.com
SPECIFICATIONS
Inputs and outputs
LINE OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
LINE 1 IN/LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
P
):
R
Phono jack/Y: 1.0 Vp-p/
P
, P
: 0.7 Vp-p
B
R
RDR-GX330
Canadian Model
General
Power requirements: 120 V AC, 60 Hz
Power consumption: 22 W
Dimensions (approx.):
430 × 58 × 291 mm
(17 × 2
depth) incl. projecting parts
Mass (approx.): 3.1 kg (6.83 lb)
Operating temperature:
5ºC to 35ºC (41ºF to 95ºF)
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1)
Power cord (1)
Antenna cable (1)
,
Remote commander (remote) (1)
B
Size AA (R6) batteries (2)
Specifications and design are subject to
change without notice.
DVD RECORDER
RMT-D229A
US Model
× 11
in.) (width/height/
3
1
8
2

Advertisement

Table of Contents
loading

Related Manuals for Sony RDR-GX330

Summary of Contents for Sony RDR-GX330

  • Page 1 RDR-GX330 All manuals and user guides at all-guides.com RMT-D229A SERVICE MANUAL US Model Canadian Model SPECIFICATIONS System Inputs and outputs General Laser: Semiconductor laser LINE OUT Power requirements: 120 V AC, 60 Hz Channel coverage: (AUDIO): Phono jack/2 Vrms/10 kilohms Power consumption: 22 W (VIDEO): Phono jack/1.0 Vp-p...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com TABLE OF CONTENTS SERVICE NOTE DISASSEMBLY DISK REMOVAL PROCEDURE IF THE TRAY 2-1. UPPER CASE ································································· 2-2 CANNOT BE EJECTED (FORCED EJECTION) ············ 5 2-2. TRAY COVER ASSEMBLY ·········································· 2-2 2-3. FRONT PANEL SECTION ············································· 2-3 GENERAL 2-4.
  • Page 4 All manuals and user guides at all-guides.com SERVICE MODE 6-1. Checking Item ································································· 6-1 6-2. Screen Transition in the Service Mode ···························· 6-2 6-3. Service Mode Menu Items and Description ···················· 6-3 6-4. Device Check Menu (1/2) ··············································· 6-3 6-5. Device Check Menu (2/2) ··············································· 6-3 6-6.

  • Page 5: Service Note

    All manuals and user guides at all-guides.com SERVICE NOTE 1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) Remove the upper case. Insert the stiff wire in the hole and eject the tray. Hole Stiff wire Open the tray NOTES DURING THE FORCED EJECTION 1.
  • Page 6 All manuals and user guides at all-guides.com MEMO — 6 —...

  • Page 7: General

    Should any solid object or liquid shop. This symbol is may cause harmful interference to Sony is not liable and will not Caution: This recorder is fall into the cabinet, unplug the intended to alert the radio communications. However,...

  • Page 8: Quick Guide To Disc Types

    All manuals and user guides at all-guides.com Usable disc versions (as of March 2006) Quick Guide to Disc Types • 8x-speed or slower DVD+RWs • 6x-speed or slower DVD-RWs (Ver.1.1, Ver.1.2 with CPRM • 16x-speed or slower DVD+Rs Recordable and playable discs •...

  • Page 9: Hookups And Settings

    All manuals and user guides at all-guides.com A: Cable box or satellite receiver with a video/audio output Hookups and Settings With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that Hooking Up the Recorder the satellite receiver or cable box is turned on.

  • Page 10: Step 2: Connecting The Video Cords

    All manuals and user guides at all-guides.com When playing “wide screen” images Step 2: Connecting the Video Cords Some recorded images may not fit your TV screen. To change the picture size, see page 74. Select one of the following patterns, A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver).

  • Page 11: Step 5: Preparing The Remote

    The remote performs the following: Notes Buttons Operations M/m, • If the supplied remote interferes your other Sony ENTER TV [/1 Turns your TV on or DVD recorder or player, change the command mode number for this recorder (page 21).

  • Page 12: Connecting A Vcr Or Similar Device

    All manuals and user guides at all-guides.com Notes Connecting a VCR or Similar Device • Pictures containing copy protection signals that prohibit any copying cannot be recorded. • If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen. After disconnecting the recorder’s AC power cord from the AC outlet, connect a VCR or DVD recorder similar recording device to the LINE IN jacks of this recorder.

  • Page 13: Playing The Recorded Program (Title List)

    All manuals and user guides at all-guides.com To stop recording Press TITLE LIST. Select a title, and press ENTER. Press x REC STOP. 3. Playing the Recorded To show the extended Title List, press The sub-menu appears. Note that it may take a few seconds for OPTIONS to select “Display List,”...

  • Page 14: Information

    All manuals and user guides at all-guides.com Press </M/m/, to select the Example: When playing a CD Checking the remaining disc 5. Changing the Name of Track playing time and the current track/index character you want to enter, and press number space ENTER.

  • Page 15: Reformatting A Disc

    All manuals and user guides at all-guides.com Finalizing is necessary when Finalizing the disc using “Disc Unfinalizing a disc 8. Reformatting a disc playing on any equipment other Information” display Video than this recorder. After finalizing, you cannot edit or Video record on the disc.

  • Page 16: Timer Recording

    All manuals and user guides at all-guides.com Select an item using </, and If the timer settings overlap Recording a stereo/SAP Timer Recording adjust using M/m. Then press ENTER. Overlapped timer settings are shown as program To make additional changes to items in follows.

  • Page 17: Checking/Changing/Canceling Timer Settings (Timer List)

    All manuals and user guides at all-guides.com “Check Overlap”: Changing the priority of Checking/Changing/ Indicates that the timer recording cannot Checks for overlapped settings. be recorded as set, such as for a timer The timer setting without the mark overlapped settings Canceling Timer recording that cannot be recorded in the has priority over the other settings.

  • Page 18: Playback

    All manuals and user guides at all-guides.com If the timer settings of a Synchro- Press the pause (or play) button on the Select the title, and press ENTER. Recording and another timer recording connected equipment to cancel the The sub-menu appears. Playback overlap playback pause status.

  • Page 19: Searching For A Title/Chapter/Track, Etc

    All manuals and user guides at all-guides.com Notes Select an item, and press ENTER. Notes Playing from the beginning of • Angles and subtitles cannot be changed with titles • If the outlines of the images on your screen The adjustment display appears. recorded on this recorder.

  • Page 20: Erasing And Editing

    All manuals and user guides at all-guides.com To play the beginning of the track About MP3 audio tracks and MP3 audio tracks or JPEG About playback order of Press OPTIONS to select “Play Beginning,” JPEG image files image files that the recorder albums, tracks, and files and press ENTER.

  • Page 21: Erasing And Editing A Title

    All manuals and user guides at all-guides.com “Set Thumbnail”: Changes the title’s When you finish selecting titles, Select point B using , and Erasing and Editing a thumbnail picture that appears in the select “OK,” and press ENTER. press ENTER. Title List (page 30).

  • Page 22: Dv/Digital8 Dubbing

    All manuals and user guides at all-guides.com To add the entire title to the Playlist title Combining multiple Playlist Dividing a Playlist title (Divide as one scene (Make a Playlist) titles (Combine Titles) Title) Press TITLE LIST. If the Title List (Playlist) appears, press ,.

  • Page 23: Recording An Entire Dv Format Tape

    All manuals and user guides at all-guides.com Select “DV / D8 EDIT,” and press When you finish adding scenes, press Recording an Entire DV Program Edit ENTER. The display asks if you want to start The scene list is displayed. Format Tape (One Touch selecting scenes.

  • Page 24: Video Settings (Video)

    All manuals and user guides at all-guides.com Press , to select “AFT.” Select “Antenna / Cable,” and press Select “Full Auto,” and press ENTER. Daylight Saving ENTER. Select “On” or “Off” (standard time), or Automatically sets your select “Auto” to have the recorder time zone and Daylight automatically set the daylight saving Saving Time (if...

  • Page 25: Audio Settings (Audio)

    All manuals and user guides at all-guides.com Audio ATT (attenuation) Set the digital output signal. Audio DRC (Dynamic Range Control) Audio Settings (Audio) If the playback sound is distorted, set this (DVDs only) • Dolby Digital (DVDs only) item to “On.” The recorder reduces the audio Selects the dynamic range (difference Selects the type of Dolby Digital signal.

  • Page 26: Remote Control Settings/Factory Settings (Others)

    Command Mode. For details, see “If you Subtitle have a Sony DVD player or more than one Switches the language of the subtitles Sony DVD recorder” on page 21. recorded on the disc.

  • Page 27: Display

    The remote does not function. being made without the use of the timer Synchro-Recording does not complete. , Contact your Sony dealer or local , Batteries are weak. (page 47). , The timer setting for the connected authorized Sony service facility.

  • Page 28: Notes About This Recorder

    IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. Required i.LINK cable IEEE 1394 is an international standard standardized by the Institute of Electrical and Use the Sony i.LINK 4-pin-to-4-pin cable...

  • Page 29: Guide To Parts And Controls

    All manuals and user guides at all-guides.com Front panel Guide to Parts and Controls For more information, see the pages in parentheses. Remote J SUBTITLE button (51) K SYSTEM MENU button (68, 71) TITLE LIST button (28, 49, 60) TIMER button (40) L CHAPTER MARK button (62) A [/1 (on/standby) button (23) I z REC button (27)
  • Page 30 All manuals and user guides at all-guides.com MEMO 1-24E...

  • Page 31: Disassembly

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. Upper case (Page 2-2) Tray cover assembly DVD drive RD-60 board D.C. fan Front panel section (Page 2-6) (Page 2-2)

  • Page 32: Upper Case

    All manuals and user guides at all-guides.com NOTE: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE 2 Three tapping screws (+BV 3 x 8) 3 Upper case 1 Two tapping screws 2-2. TRAY COVER ASSEMBLY Hole 3 Two claws 1 The stiff wire 4 Tray cover assembly...

  • Page 33: Front Panel Section

    All manuals and user guides at all-guides.com 2-3. FRONT PANEL SECTION 1 Five claws 2 Three claws 3 Front panel section 2-4. FL-155 BOARD, FR-237 BOARD 1 Flexible flat cable 7 Connector (FAR-003) (CN3002) (CN3004) 2 Flexible flat cable (FAR-002) (CN3005) 6 Remove the FL-155 board in the direction of the arrow.

  • Page 34: Dvd Drive

    All manuals and user guides at all-guides.com 2-5. DVD drive 3 Four tapping screws 5 Two Non-HALOGENE tapes (+BV 3 x 10) 6 Flexible flat cable (FRD-010) 2 Connector (CN1) 8 DVD drive 4 Remove the DVD section in the direction of the arrow. 7 Harness (PD-137) 1 Flexible flat cable (FRD-010) (CN101)
  • Page 35 All manuals and user guides at all-guides.com 2-7. AV-100 BOARD 2 Connector (CN103) 4 Flexible flat cable 1 The wire pin that holds (FAR-002) (CN701) the harness is set up. 3 The three wire pins that holds the flexible flat cables are set up. 5 Flexible flat cable (FAR-003) (CN602) qd xxxxxxxx...

  • Page 36: Power Block

    All manuals and user guides at all-guides.com 2-8. Power block 3 Three tapping screws (+BV 3 x 8) 4 Remove the Power block in the direction of the arrow. 2 Tapping screw (+P 3 x 8) 1 Connector (CN3) 2-9. D. C. FAN 4 Remove the D.C.

  • Page 37: Circuit Boards Location

    All manuals and user guides at all-guides.com 2-10.CIRCUIT BOARDS LOCATION Power block AV-100 board FL-155 board RD-60 board FR-237 board...
  • Page 38 All manuals and user guides at all-guides.com MEMO 2-8E...

  • Page 39: Block Diagrams

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM J701 AV-100 BOARD J701 LINE OUT IC702 S VIDEO VIDEO COMPONENT VIDEO AMP SELECTOR TU401 VIDEO OUT AUDIO L UHF/VHF AUDIO R TU VIDEO...

  • Page 40: Block Diagram

    All manuals and user guides at all-guides.com RDR-GX330 3-2. AV-100 BLOCK DIAGRAM AV-100 BOARD J701 IC702 WIDE SELI VIDEO AMP CVBS OUT SELECTOR J701 C OUT S-Y OUT 27 LINE OUT CVBS1 Y2 IN C-Y OUT 25 S VIDEO C2 IN...
  • Page 41 All manuals and user guides at all-guides.com RDR-GX330 3-3. RD-060 BLOCK DIAGRAM RD-060 BOARD FR-237 BOARD(2/2) FR5V RECDY 1 VOUT AT1DATA0 RECCCR FL-155 BOARD IDE D0-D15 AT1DATA15 IC3002 S3101 Q601 COUT REMOTE COMMANDER AD10 COUT C6,C7 SIRCS RECIEVER POWER AT1 ADRO,ADR1...

  • Page 42: Power Block Diagram

    All manuals and user guides at all-guides.com RDR-GX330 3-4. POWER BLOCK DIAGRAM SWITCHING REGULATOR RD-060 BOARD (SRV-1854UC) IC301 IC601 D303 P301 2A 12V REG T101 1V REG POWER TRANSFORMER F101 D101 L601 T3.15A / 250V RECT UNSW 5V SW1V D301...

  • Page 43: Schematic Diagrams

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 4 SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-1. FRAME SCHEMATIC DIAGRAM CN103 FAN_OUT FAN_DET CN104 UNSW12V UNSW12V AV-100 UNSW6V UNSW6V UNSW6V UNSW6V SW5V SW5V UNSW4V UNSW4V UNSW4V UNSW4V POWER UNSW-8V UNSW-8V...

  • Page 44: Schematic Diagrams

    All manuals and user guides at all-guides.com RDR-GX330 4-2. SCHEMATIC DIAGRAMS WAVEFORMS AV-100 BOARD THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) J701 COMPONENT P (For schematic diagrams) X602 •...
  • Page 45 All manuals and user guides at all-guides.com RDR-GX330 AV-100 BOARD(1/6) R135 POWER UNSW-8V-V PS102 -REF.NO.:3000 SERIES- 0.63A TO(6/6) UNSW5V-V NO MARK:REC/PB MODE GND-V R137 CN104 JL102 UNSW12V UNSW12V-A R140 UNSW6V-A JL104 UNSW6V PS103 JL105 0.63A UNSW6V TO(3/6) JL106 UNSW-8V-A SWITCHING...
  • Page 46 All manuals and user guides at all-guides.com RDR-GX330 SWA-8V AV-100 BOARD(2/6) SWA12V AUDIO IN SWA5V AOUTR- AOUTR- -REF.NO.: SERIES- TO(3/6) AOUTR+ AOUTR+ NO MARK:REC/PB MODE AOUTL+ AOUTL+ AOUTL- AOUTL- SPDIFO SPDIFO CN503 C205 R212 AINL- ± 0.5% AINL+ AU2INR AUGND...

  • Page 47: 3/6) (Audio Out)

    All manuals and user guides at all-guides.com RDR-GX330 AV-100 BOARD(3/6) AUDIO OUT NO MARK:REC/PB MODE R310 5100 R320 ± 0.5% 2200 AOUTR- R323 R311 C313 5600 5100 560p ± 0.5% ± 0.5% AOUTR+ R314 C316 R317 5600 C310 C314 R326 2200 ±...
  • Page 48 All manuals and user guides at all-guides.com RDR-GX330 TU401 (TUNER) AV-100 BOARD(4/6) VHF/UHF TUNER -REF.NO.: SERIES- NO MARK:REC/PB MODE 10 11 L402 Q405 10uH BC847CE6327 R415 C415 R410 100u JL404 TU_G_MAX JL406 R414 TU_AFT 100k TU_AFT TU_AUTOP TU_AUTOP C416 TO(5/6)
  • Page 49 All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-4 for waveforms. AV-100 BOARD(5/6) IT CONTROLLER -REF.NO.:10000 SERIES- NO MARK:REC/PB MODE R :REC MODE R673 P :PB MODE * :Cannot be measured R674 R675...

  • Page 50: 6/6) (Video In/Out)

    All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-4 for waveforms. AV-100 BOARD(6/6) AU2INL vIDEO IN/OUT AU2INR AU1INL -REF.NO.: SERIES- AU1INR D717 D727 NO MARK:REC/PB MODE STZ6.8N-T146 STZ6.8N-T146 TO(2/6) AU_GND SPD_GND JL735 R1707...

  • Page 51: Power Switch

    All manuals and user guides at all-guides.com RDR-GX330 FL-155 BOARD POWER SWITCH S3101 POWER CN3101 JL3101 IT_GND JL3102 KEY0 FR-237 BOARD JL3103 CN3001 IT_GND (PAGE 4-19) JL3104 IT_GND JL3105 IT_GND POWER SWITCH 4-17 4-18 FL-155...

  • Page 52: Fl Drive, Line2 In, Function Sw

    All manuals and user guides at all-guides.com RDR-GX330 ND3001 (FLUORESCENT TUBE DISPLAY) FR-237 BOARD FL DRIVE,LINE2 IN,FUNCTION SW -REF.NO.:1000 SERIES- 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46...
  • Page 53 All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-33 for printed wiring board. RD-060 BOARD(1/5) R143 R1066 R146 4700 RISM3 4700 ± 0.5% RB180 ± 0.5% C1031 -REF.NO.: SERIES- C1030 0.1u 0.1u NO MARK:REC/PB MODE...

  • Page 54: 2/5) (Flash Rom, Super And)

    All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-33 for printed wiring board. HMS[0] HMS[0] RD-060 BOARD(2/5) FLASH ROM,SUPER AND NAND_CS NO MARK:REC/PB MODE NAND_CS HCS[0] :Voltage measurement of the CSP IC HCS[0]...
  • Page 55 All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-33 for printed wiring board. RD-060 BOARD(3/5) AV-CN/POWER -REF.NO.:10000 SERIES- NO MARK:REC/PB MODE R612 Q601-605 BUFFER XRMUTE XRMUTE R613 CN604 XLMUTE CR/R XLMUTE R603 GND_V...
  • Page 56 All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-33 for printed wiring board. RD-060 BOARD(4/5) :Voltage measurement of the CSP IC and the Transistors with mark,is DV-PHY not possible. TO(1/5,2/5,3/5) XSYSRST PHYLPS PHYLREQ...
  • Page 57 All manuals and user guides at all-guides.com RDR-GX330 For Schematic Diagram • Refer to page 4-33 for printed wiring board. • Refer to page 4-4 for waveforms. IC802 IC802 RD-060 BOARD(5/5) ICS650G-42LFT R823 C806 PLL/AUDIO-AD-DA REF27M3 0.01u JL802 REF27M2 C807...

  • Page 58: Switching Regulator (Srv-1854Uc)

    All manuals and user guides at all-guides.com RDR-GX330 SWITCHING REGULATOR (SRV-1854UC) C112 D101 680P S1WBA60B IC301 250V RECT T101 12V REG P301 L302 D301 L301 D303 POWER TRANSFORMER 11EQS06 S3L20U 10uH R104 C106 1000P 100k C303 C105 R113 220u R301...

  • Page 59: Printed Wiring Boards

    All manuals and user guides at all-guides.com RDR-GX330 4-3. PRINTED WIRING BOARDS RD-060 BOARD (SIDE A) • : Uses unleaded solder. RD-060 BOARD (SIDE A) CN101 B-1 CN601 A-1 CN603 A-4 CN604 A-3 IC605 CL627 CN701 E-5 CN601 R656 D503...
  • Page 60 All manuals and user guides at all-guides.com RDR-GX330 RD-060 BOARD (SIDE B) • : Uses unleaded solder. RD-060 BOARD (SIDE B) JL620 FB606 JL637 RB601 JL636 IC101 JL123 JL622 C614 JL619 JL618 JL638 JL640 JL631 R660 R661 JL630 IC601 JL1001...

  • Page 61: Ic Pin Function Description

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC603: M306H5FGFP-302UO (AV-100 BOARD)) Pin No. Pin Name Function ONDO Detection of board temperature SIRCSIN Input of remote control signal AVLINK-IN Fixed at “L”...
  • Page 62 All manuals and user guides at all-guides.com Pin No. Pin Name Function Fixed at “L” HDET_2 Not used INSEL_PCONT1 Output of IC’s power supply signal (“H”:INSEL) XP_AMUTE Output of muting signal for audio SLICE_V_SW Not used SYNCHRO_DET — Detection of selection signal from component video signal AREA0 Fixed at “H”...
  • Page 63 All manuals and user guides at all-guides.com Pin No. Pin Name Function AVCC — Power supply input (Analog 5V) TEST3_CONT Not used START Fixed at “H” SYNCIN Input composite video signal SVREF When slice the vertical synchronous signal input slice power TEST2 Fixed at GND VDD3...

  • Page 64: Main Control Ic

    All manuals and user guides at all-guides.com 5-2. MAIN CONTROL IC (IC103: R8A34012BG (RD-060 BOARD)) Pin No. Pin Name Function AT1DATA[11] — Input/output of data 11 AT1DATA[12] — Input/output of data 12 AT1DATA[14] — Input/output of data 14 AT1DIOW Output of write signal AT1INTRQ Input of IRQ HDREQ[0]...
  • Page 65 All manuals and user guides at all-guides.com Pin No. Pin Name Function VCCAAD10A — Power supply input (Analog 3.3V)(ADC) VROA — Fixed at “L” VROB — Fixed at “L” VCCAAD10B — Power supply input (Analog 3.3V)(ADC) VCCADA10 — Power supply input (Analog 3.3V)(DAC) VCCADA10 —...
  • Page 66 All manuals and user guides at all-guides.com Pin No. Pin Name Function VSSADA10 — Analog GND BOUT(PD2) Output of analog video signal (blue) VSSADA10 — Analog GND AD10 COUT(PD3) Output of analog video signal (chroma) AD11 TESTMOD[2] Fixed at “L” AD12 TESTMOD[7] Fixed at “L”...
  • Page 67 All manuals and user guides at all-guides.com Pin No. Pin Name Function HADRS[31] Output of address 30 HADRS[27] Output of address 30 HADRS[23] Output of address 30 HADRS[20] Output of address 30 HADRS[16] Output of address 30 HADRS[12] Output of address 30 HADRS[8] Output of address 30 MSBS...
  • Page 68 All manuals and user guides at all-guides.com Pin No. Pin Name Function HADRS[18] Output of address 18 HADRS[14] Output of address 14 HADRS[9] Output of address 9 MSINS — Fixed at “L” SCLK[2] — Fixed at “H” CTS[2] — UART(CSIO)/GPIO TX[0] —...
  • Page 69 All manuals and user guides at all-guides.com Pin No. Pin Name Function VDD33 — Power supply input (Digital 3.3V) Digital GND CSYNC — Fixed at “H” HDATA[6] — Input/output of data 6 HDATA[3] — Input/output of data 3 HDATA[2] — Input/output of data 2 AT2DATA[0] —...
  • Page 70 All manuals and user guides at all-guides.com Pin No. Pin Name Function AT2DATA[7] — Fixed at “L” AT2DATA[8] — Fixed at “L” Digital GND Digital GND Digital GND Digital GND Digital GND Digital GND — Power supply input (Digital 1.0V) DDATA[30] —...
  • Page 71 All manuals and user guides at all-guides.com Pin No. Pin Name Function Digital GND DDATA[25] — Input/output of data 25 VDD25 — Power supply input (Digital 2.5V) Digital GND DDATA[16] — Input/output of data 16 DDATA[17] — Input/output of data 17 A0LRCKI Input of audio L/R clock signal DACCLKO...
  • Page 72 All manuals and user guides at all-guides.com Pin No. Pin Name Function DDATA[12] — Input/output of data 12 DDATA[5] — Input/output of data 5 Digital GND 5-12E...

  • Page 73: Service Mode

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 6 SERVICE MODE This is the diagnostics to locate cause of fault. The diagnostics can be executed using the remote commander and a monitor. To enter the service mode, connect the VIDEO OUT connector of the main unit to the monitor. While pressing the “A” (Open/Close) button and the “G”...

  • Page 74: Screen Transition In The Service Mode

    MODEL SYSCON Version [ < RETURN > HDD Serial ID [ Setting ON/OFF of the NTSC 100% white signal output HDD Sony ID [ << Display Color >> 1) White Signal ON < 2 > 2) White Signal OFF < RETURN >...

  • Page 75: Device Check Menu (1/2)

    When the key “8” is pressed down, the monitor display moves HDD Serial ID [ to the Device Check menu screen. Sony ID [ Key “9” is not used. When the key “0” is pressed down, the monitor display moves to the G-code Setting menu screen.
  • Page 76 All manuals and user guides at all-guides.com MEMO 6-4E...

  • Page 77: Adjustment

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 7 ADJUSTMENT 7-1. Video System Adjustment 2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video Y-signal output has the rated Preparing for Adjustment amplitude. If it adjusted incorrectly, the playback video signal will 1.

  • Page 78: Component Video Output Y Check

    All manuals and user guides at all-guides.com 3. S-Video Output S-C Check 5. Component Video Output B-Y Check <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video NTSC standard.

  • Page 79: Repair Parts List

    All manuals and user guides at all-guides.com RDR-GX330 SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark 0or have some differences from the original one.

  • Page 80: Chassis Section

    All manuals and user guides at all-guides.com 8-1-2. CHASSIS SECTION supplied supplied supplied TU401 supplied supplied supplied supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks A-1183-535-A RD-60 BOARD, COMPLETE 3-077-331-31 +BV3 (3-CR) 1-832-951-12 CABLE, FLEXIBLE FLAT (FRD-010) 3-077-331-01 +BV3 (3-CR) * 53 1-831-411-11 CABLE, FLEXIBLE FLAT (FRA-005)

  • Page 81: Electrical Parts List

    All manuals and user guides at all-guides.com AV-100 8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name. specified in the diagrams or the components •...
  • Page 82 All manuals and user guides at all-guides.com AV-100 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C652 1-107-826-11 CERAMIC CHIP 0.1uF C775 1-126-947-11 ELECT 47uF C655 1-107-826-11 CERAMIC CHIP 0.1uF C1452 1-107-826-11 CERAMIC CHIP 0.1uF C657 1-107-826-11 CERAMIC CHIP 0.1uF C1453...
  • Page 83 All manuals and user guides at all-guides.com AV-100 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC LINK > R222 1-218-879-11 METAL CHIP 0.5% 1/10W R223 1-218-879-11 METAL CHIP 0.5% 1/10W 0 PS102 1-576-570-21 FUSE, MICRO (1608 TYPE) R224 1-218-863-11 METAL CHIP 4.7K...
  • Page 84 All manuals and user guides at all-guides.com AV-100 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R405 1-216-821-11 METAL CHIP 1/10W R669 1-216-833-11 METAL CHIP 1/10W R410 1-216-809-11 METAL CHIP 1/10W R670 1-216-833-11 METAL CHIP 1/10W R411 1-216-864-11 SHORT CHIP R671...
  • Page 85 All manuals and user guides at all-guides.com AV-100 FL-155 FR-237 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1453 1-218-905-11 METAL CHIP 270K 0.5% 1/10W FR-237 BOARD, COMPLETE(NOT SUPPLIED) R1454 1-218-885-11 METAL CHIP 0.5% 1/10W ************************************ R1610 1-216-809-11 METAL CHIP 1/10W...
  • Page 86 All manuals and user guides at all-guides.com FR-237 RD-060 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < RESISTOR > C110 1-125-777-11 CERAMIC CHIP 0.1uF C111 1-125-777-11 CERAMIC CHIP 0.1uF R3001 1-218-285-11 METAL CHIP 1/10W C112 1-125-777-11 CERAMIC CHIP 0.1uF R3002...
  • Page 87 All manuals and user guides at all-guides.com RD-060 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C170 1-125-777-11 CERAMIC CHIP 0.1uF C805 1-125-777-11 CERAMIC CHIP 0.1uF C171 1-125-777-11 CERAMIC CHIP 0.1uF C806 1-164-943-81 CERAMIC CHIP 0.01uF C172 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 88 All manuals and user guides at all-guides.com RD-060 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > R134 1-218-933-11 RES-CHIP 1/16W R135 1-218-990-81 SHORT CHIP IC101 6-702-302-01 IC TK11133CSCL-G R136 1-218-935-11 RES-CHIP 1/16W IC103 6-708-896-01 IC R8A34012BG R137 1-218-973-11 RES-CHIP...
  • Page 89 All manuals and user guides at all-guides.com RD-060 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R548 1-218-990-81 SHORT CHIP R717 1-208-910-11 METAL CHIP 9.1K 0.5% 1/16W R549 1-218-990-81 SHORT CHIP R718 1-218-938-11 RES-CHIP 1/16W R551 1-218-990-81 SHORT CHIP R719 1-218-938-11 RES-CHIP...
  • Page 90 All manuals and user guides at all-guides.com RD-060 POWER BLOCK Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB111 1-242-963-21 RES, NETWORK 33 (1005X4) 1-468-959-11 POWER BLOCK (SRV-1854UC) RB112 1-242-963-21 RES, NETWORK 33 (1005X4) ************************ RB113 1-242-963-21 RES, NETWORK 33 (1005X4) RB114 1-242-963-21 RES, NETWORK 33 (1005X4)
  • Page 91 All manuals and user guides at all-guides.com RDR-GX330 Sony Corporation 2006C1600-1 Home Electronics Network Company 9-883-907-11 ©2006.03 — 114 — Published by Quality Assurance Dept.

This manual is also suitable for:

Rmt-d229a

Table of Contents