Table of Contents
Advertisement
❖ Information
If you want to use the tethering, use of Packet Pack/
･
packet flat-rate service is highly recommended.
Tethering function cannot be used when neither
･
Wi-Fi nor mobile data communication is not
available on the terminal.
Up to 15 (portable hotspot (Wi-Fi tethering) : 10, USB
･
tethering : 1, Bluetooth tethering : 4) can be
connected at the same time.
When Data Saver (P.155) is ON, tethering function is
･
not available.
Enabling Portable hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 10 wireless LAN
devices to the Internet simultaneously.
From the Home screen,
1
u
[Settings]
[Network & internet]
[Hotspot & tethering].
[Portable hotspot]
2
❖ Information
When you start using the portable hotspot during
･
Wi-Fi network connection, Wi-Fi connection is
disconnected. When using the portable hotspot is
ended, the terminal is automatically connected to
Wi-Fi network.
To display the QR code for password of Wi-Fi access
･
point, in Step 2, tap [Portable hotspot]
"Hotspot name".
u
u
u
.
u
for
Changing the portable hotspot
settings
You can change the default network name
(SSID), security setting, or password.
From the Home screen,
1
u
[Settings]
[Network & internet]
[Hotspot & tethering]
hotspot].
[Hostpot name]
2
network name (SSID) of the Wi-Fi
hotspot name
The device name of the terminal is set
･
by default.
u
[Security]
Tap a security type you
3
want to set.
Tap [Hotspot password]
4
u
password
[OK] as required.
By default, a password is set in a
･
random manner.
❖ Information
Tapping
of "Turn off hotspot automatically" in
･
Step 2 sets to automatically turn off the portable
hotspot when the terminal keeps no connection to
wireless LAN device.
u
u
[Portable
u
Enter the
u
[OK].
u
Enter a
Settings
u
153
Advertisement
Table of Contents
