hit counter script
Download Print this page
Sony SRS-XB13 Reference Manual

Sony SRS-XB13 Reference Manual

Hide thumbs Also See for SRS-XB13:

Advertisement

Quick Links

Wireless Speaker
SRS-XB13
©2021 Sony Corporation
Printed in China
https://www.sony.net/
English
Wireless Speaker
Before operating the unit, please read this guide thoroughly and retain it
for future reference.
Please access the following URL and read the contents of the END USER
LICENSE AGREEMENT.
https://rd1.sony.net/help/speaker/el21/h_zz/
CAUTION
Do not expose the appliance to naked flame sources (for example,
lighted candles).
Do not install the appliance in a confined space, such as a bookcase or
built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to
excessive heat such as sunshine, fire or the like for a long time. Do not
subject the batteries to extreme low temperature conditions that may
result in overheating and thermal runaway. Do not dismantle, open or
shred secondary cells or batteries. In the event of a cell leaking, do not
allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with copious amounts of water and
seek medical advice. Secondary cells and batteries need to be charged
before use. Always use the correct charger and refer to the
manufacturer's instructions or equipment manual for proper charging
instructions. After extended periods of storage, it may be necessary to
charge and discharge the cells or batteries several times to obtain
maximum performance. Dispose of properly.
Do not place this product close to medical devices
This product (including accessories) has magnet(s) which may interfere
with pacemakers, programmable shunt valves for hydrocephalus
treatment, or other medical devices. Do not place this product close to
persons who use such medical devices. Consult your doctor before using
this product if you use any such medical device.
This equipment has been tested and found to comply with the limits set
out in the EMC regulation using a connection cable shorter than
3 meters.
Caution on charging
Inserting the USB plug while it is wet may cause a short circuit due
to foreign matter or liquid (tap water, salt water, soft drinks, etc.)
getting on the main unit or charging cable. This may cause
malfunctions or abnormal overheating.
Never insert the USB plug while the main unit or
charging cable is wet.
Precautions
On safety
• Important information such as the model name is located on the
bottom of the unit.
On placement
• To eliminate the risk of malfunctions, avoid the following locations
when placing or leaving this unit.
– A place subject to high temperatures, such as under direct sunlight or
lighting equipment, near a heat source, or in a sauna
– Inside a vehicle with the windows closed (especially in summertime)
– A place subject to excessive dust
– A place subject to strong vibration
• Place this unit on a flat, level surface. When placed on a sloped surface,
the unit may fall over or fall off the surface due to its own vibration,
resulting in injuries, malfunctions, or performance degradation.
• Depending on the conditions where this unit is placed, it may fall over
or fall off the surface. Do not leave any valuables near the unit.
• This unit is not anti-magnetic. Keep objects susceptible to magnetism
(recorded tapes, watches, cash cards and credit cards with magnetic
coding, etc.) away from the unit. When you carry around the unit, keep
this in mind as well.
Others
• Do not use or leave the unit in an extremely cold or hot environment
(temperature outside the range of 5 °C – 35 °C). If the unit is used or left
in outside the above range, the unit may automatically stop to protect
internal circuitry.
• At high temperature, the charging may stop or the volume may reduce
to protect the battery.
• Even if you do not intend to use the unit for a long time, charge the
battery to its full capacity once every 6 months to maintain its
performance.
On Copyrights
• Android is a trademark of Google LLC.
• The BLUETOOTH® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Sony Corporation is under license.
• iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
• USB Type-C® and USB-C® are registered trademarks of
USB Implementers Forum.
• Other trademarks and trade names are those of their respective
owners.
• ™ and ® marks are omitted in the documents.
5-025-467-41(1)
Reference Guide
참고 설명서
Notes on waterproof and dustproof
features (Read before using the unit)
Waterproof and dustproof performance of the unit
The unit, with the cap closed securely, has a waterproof specification of
1
IPX7*
as specified in "Degree of protection against water immersion" of
the IEC60529 "Ingress Protection Rating (IP Code)"*
2
specification of IP6X*
as specified in "Degrees of protection against
solid foreign objects"*
3
.
Liquids that the waterproof performance specifications
apply to
Applicable
fresh water, tap water, pool water
Not applicable
liquids other than the above (soapy water, water
with detergent or bath agents, shampoo, hot spring
water, salt water, etc.)
1
*
IPX7 (Degree of protection against water immersion): For details, refer
to the Help Guide.
2
*
IP6X (Degrees of protection against dust): For details, refer to the Help
Guide.
*
3
The supplied accessories and the connectors of this unit (USB) are
neither waterproof nor dustproof. To reduce the risk of fire or electric
shocks, do not expose the unit to water or droplets while using either
or both of the connectors (USB). Do not place a vase or any other
liquid-filled container on the unit.
The waterproof and dustproof performance of the unit is based on our
measurements under the conditions herein described. Note that
malfunctions as a result of water immersion or dust intrusion caused
by misuse by the customer are not covered by the warranty.
To avoid the deterioration of waterproof and dustproof
performance
Check the following and use the unit correctly.
• This unit does not have a design that is resistant to water pressure. Use
of the unit in a location where high water pressure is applied, such as
in the shower, may cause a malfunction.
• Do not pour high-temperature water or blow hot air from a hair dryer
or any other appliance on the unit directly. Also never use the unit in a
place subject to high temperatures, such as in a sauna or near a heat
source.
• Handle the cap with care. The cap plays a very important role in
maintenance of the waterproof and dustproof performance. When
using the unit, make sure that the cap is closed completely. When
closing the cap, be careful not to allow foreign objects inside. If the cap
is not closed completely the waterproof and dustproof performance
may deteriorate and may cause a malfunction of the unit as a result of
water or dust particles entering the unit.
How to care for the unit
You can use the unit more comfortably and for a longer period of time
by following the maintenance procedure below.
• If the surface of the unit gets dirty in the following cases, wash the unit
with fresh water (tap water, etc.) promptly to remove the dirt. Leaving
dirt on its surface may cause the surface to discolor or deteriorate, or
the unit to malfunction.
Ex.
– When the unit has sand, salt (chlorine), or other residue on it after
having been used in a mountain area, by a swimming pool, etc.
– When the unit is stained with foreign substances (sunscreen, suntan
oil, etc.)
• If the unit gets wet, wipe off the moisture using a dry soft cloth
immediately. In addition, dry the unit in an airy place until no moisture
remains.
• The sound quality may change if water enters the speaker component
of the unit. This, however, does not indicate a malfunction. Wipe the
moisture off the unit surface, and leave the unit on a dry soft cloth with
its surface with the speaker component facing down to let the water
out from inside the unit. Then, dry the unit in an airy place until no
moisture remains.
Note
• If the surface of the unit gets dirty, do not use detergent, thinner,
benzine, alcohol, etc. to clean the unit because it will affect the water
repellent function of the unit.
• Especially in cold regions, be sure to wipe off the moisture after using
the unit. Leaving moisture on its surface may cause the unit to freeze
and malfunction.
Notes on the License
This product contains software that Sony uses under a licensing
agreement with the owner of its copyright. We are obligated to
announce the contents of the agreement to customers under
requirement by the owner of copyright for the software.
Please access the following URL and read the contents of the
license.
https://rd1.sony.net/help/speaker/sl/21/
Disclaimer regarding services offered by third parties
Services offered by third parties may be changed, suspended, or
terminated without prior notice. Sony does not bear any
responsibility in these sorts of situations.
Specifications
Speaker section
Speaker system Approx. 46 mm dia. × 1
Enclosure type Passive radiator model
BLUETOOTH
Communication System
BLUETOOTH Specification version 4.2
Maximum communication range
Line of sight approx. 10 m*
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible BLUETOOTH Profiles*
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Supported Codec*
3
SBC (Subband Codec)
AAC (Advanced Audio Coding)
Transmission range (A2DP)
20 Hz - 20 000 Hz (Sampling frequency 44.1 kHz)
1
*
The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, reception sensitivity, antenna's performance, operating
system, software application, etc.
2
*
BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communications between devices.
3
*
Codec: Audio signal compression and conversion format
Note
Depending on the network environment, there may be an interruption at
the high bitrate transmission.
Microphone
Type
Electret condenser
Directional characteristic
Omni directional
Effective frequency range
100 Hz - 7 000 Hz
3
, and a dustproof
Cap
1
2

Advertisement

loading

Summary of Contents for Sony SRS-XB13

  • Page 1 Inserting the USB plug while it is wet may cause a short circuit due to foreign matter or liquid (tap water, salt water, soft drinks, etc.) This product contains software that Sony uses under a licensing getting on the main unit or charging cable. This may cause agreement with the owner of its copyright.
  • Page 2 5. 단락으로 인한 전지의 발열을 방지하기 위하여 방전상태로 폐기하여 주십시오. 라이선스에 관한 유의 사항 6. 단자 부분이 쇼트(단락)하지 않도록 테이프 등으로 싸서 버려 주십시오. 이 제품에는 Sony가 해당 저작권 소유자와의 사용권 계약에 따라 사용하는 7. 취급설명서로 지정한 충전 방법을 따라서 충전하십시오. 소프트웨어가 들어 있습니다. 당사는 소프트웨어의 저작권 소유자의 요구에...