Advertisement
MX95/MX105 Series Hardware Installation Guide
The network performance benchmarks listed in the KB are target numbers based on initial testing and can change on further testing.
About this Guide
This guide provides instruction on how to install and configure your MX95/105 series device. This guide also provides mounting instructions and limited
troubleshooting procedures. For more MX device installation guides, refer to the
Product Overview
The Meraki MX95/105 is an enterprise security appliance designed for distributed deployments that require remote administration across Medium branch
environments. It is ideal for network administrators who demand both ease of deployment and a state-of-the-art feature set. The Meraki Dashboard allows for
simple and easy deployment of the MX95/105 with minimal pre-configuration in almost any location.
MX95/105 appliance provides the following features:
• Four dedicated WAN uplinks, two 10G SFP+ ports and two RJ45 2.5G mGig ports.
• The LAN ports include four RJ45 1G ports and two SFP+ 10G ports.
• Dedicated management port
• Front-panel rack mounts
Features
•
Managed via Cisco Meraki Dashboard
•
Automatic Firmware upgrades
•
WAN Link Balancing
MX installation guides section
on our documentation website.
•
Meraki AutoVPN and L2TP/IPSec VPN endpoint
•
Active Directory integration
•
Content Filtering
1
Advertisement
Table of Contents
Related Manuals for Cisco Meraki MX95 Series
Summary of Contents for Cisco Meraki MX95 Series
- Page 1 • The LAN ports include four RJ45 1G ports and two SFP+ 10G ports. • Dedicated management port • Front-panel rack mounts Features • Managed via Cisco Meraki Dashboard • Meraki AutoVPN and L2TP/IPSec VPN endpoint • Automatic Firmware upgrades •...
-
Page 2: Physical Specifications
• Automatic WAN Failover • Malware Protection (AMP) w/ optional Threat Grid integration • SD-WAN over Meraki AutoVPN • IDS/IPS protection • L3/L7 Stateful Firewall • Custom Traffic Shaping • Geo based firewall rules • Historical Client Usage statistics • 1:1 and 1:Many NAT •... - Page 3 Accessories The Cisco Meraki MX95/105 models support pluggable optics for high-speed backbone connections between wiring closets or to aggregation switches. Cisco Meraki offers several standards-based Gigabit and 10 Gigabit pluggable modules. Each appliance has also been tested for compatibility with several third party modules.
- Page 4 MA-PWR-CORD-UK 1x AC Power Cable, UK plug MA-PWR-CORD-AU 1x AC Power Cable, AU plug MA-RCKMNT-KIT-1 Rack mount screws kit MA-FAN-18K 1x Meraki 18K RPM system fan for MX105 MA-PWR-150WAC 1x Meraki MX105 Power Supply Unit (PSU) Note: Please refer to meraki.com for additional single-mode and multi-mode fiber transceiver modules Product View and Physical Features Front Panel Status Indicators...
-
Page 5: Mounting Recommendations
Back Panel MX-95 MX-105 Please note that the serial number is located on the product label at the back panel of the MX95/105. Insert a paper clip if a reset is required. • A brief, momentary press: To delete a downloaded configuration and reboot. Reset button •... -
Page 6: Pre-Install Preparation
• Power off the unit before you begin. Read the installation instructions before connecting the system to the power source. • Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. -
Page 7: Connecting To Wan
Connecting to WAN All Meraki MX devices must have an IP address. This section describes how to configure your local area network before you deploy it. A local management web service, running on the appliance, is accessed through a browser running on a client PC. This web service is used for configuring and monitoring basic ISP/WAN connectivity. -
Page 8: Basic Troubleshooting
If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard and using the Help option near the top of the page, then opening and email case or calling using the contact information on that page. - Page 9 If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned.