Table of Contents
Advertisement
When [USB Connect] is not set
to [PictBridge] on the Setup
screen
Even if you turn on the camera, you cannot
use the PictBridge function.
Set [USB Connect] to [PictBridge].
1 Press MENU and select [USB Connect],
then press z.
2 Select [PictBridge] with v, then press
z.
USB Connect
PictBridge
PTP
Normal
Printing images
Mode switch:
/
/
You can select the image and print it. Set up
the camera following the procedure on page
2, and connect the printer.
Control button
MENU
Mode switch
• You cannot print movies.
• When you print an E-mail image, only the
JPEG image that was recorded at the same time
is printed.
• When an error notification is received from the
connected printer, the
indicator flashes for
approximately 5 seconds. Check the connected
printer.
In single-image mode
a Display the image you want to
print with b/B.
b Press MENU.
The menu appears.
c Select
(Print) with b/B, then
press z.
d Select [This image] with v/V,
then press z.
The print setting screen appears.
5M
101
2/9
Print
Index
Off
Date
Off
Quantity
1
Exit
OK
• Items that the printer does not support are
not displayed.
e Select [Quantity] with v/V,
select the number of sheets
with b/B.
You can select the number up to 20.
3
Advertisement
Table of Contents
