Selecting The Method For Measuring The Brightness Of A Subject (Metering Mode) - Sony DSLR-A200 Instruction Manual (DSLR-A200) Instruction Manual
Digital single lens reflex camera
Hide thumbs
Also See for DSLR-A200 Instruction Manual (DSLR-A200):
- Service manual (123 pages) ,
- Specifications (2 pages) ,
- Quick start manual (1 page)
Table of Contents
Advertisement
ADI flash
Pre-flash TTL
ADI: Advanced Distance Integration
TTL: Through the lens
• When [ADI flash] is selected, using a lens that is provided with a distance
encoder feature can perform more accurate flash compensation by using
more accurate distance information.
Notes
• When the distance between the subject and the external flash (not supplied) cannot
be determined (wireless flash shooting using an external flash (not supplied),
shooting with an off-camera flash using a cable, shooting with a macro twin flash,
etc.), the camera automatically selects Pre-flash TTL mode.
• Select [Pre-flash TTL] in the following cases, as the camera cannot perform flash
compensations with ADI flash.
– A wide panel is attached to the HVL-F36AM flash.
– A diffuser is used for flash shooting.
– A filter with an exposure factor, such as an ND filter, is used.
– A close-up lens is used.
• ADI flash is only available in combination with a lens that is provided with a
distance encoder. To determine if the lens is equipped with a distance encoder, refer
to the operating instructions supplied with the lens.
Selecting the method for measuring the brightness of a
subject (Metering mode)
Fn button t [Metering mode] t Select the desired mode
(Multi segment)
(Center weighted) While emphasizing the central area of the screen, this mode
(Spot)
80
This method controls the lighting of the flash, factoring in the
focus distance information and light metering data from the
pre-flash. This method enables an accurate flash
compensation with virtually no effect from the reflection off
the subject.
This method controls the amount of flash light depending on
the data only from pre-flash light metering. This method is
susceptible to the reflection off the subject.
This divides the whole screen into 40 segments to measure
light (40-segment honeycomb pattern metering).
measures the average brightness of the entire screen.
This mode measures light only in the spot metering circle in
the center of the frame.
- Quick Links:
- Inserting a Memory Card
Hide quick links:
Advertisement
Table of Contents
