Page 1 R200/R205 Series User’s Guide If you need assistance: Toshiba’s Support Website pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 206 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Website at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 ETS 300 328 Technical requirements for radio equipment. ETS 300 826 General EMC requirements for radio equipment. English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 12 Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13 The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Device Authorization
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. The Name of the radio equipment: refer to the equipment label provided on the computer JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS...
Page 15 NOTE This device works on passive scan only. A peer-to-peer mode is not available in 802.11a and Turbo Mode. 802.11b (2.4 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique:...
Page 16 Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être utilisés endroits extérieur en France. Vous pouvez contacter I’Autorité de Régulation des Télécommuniations (http://www.art-telecom.fr) pour la procédure à suivre. Italia: License required for indoor use. Use with outdoor installations not allowed.
Page 17 European Community Countries Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK Iceland, Spain O: allowed ×: forbidden To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation.
Page 18 Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 19 Mexico Norway Singapore Switzerland Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 20: Bluetooth Wireless Technology Interoperability
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 21: Bluetooth Wireless Technology And Your Health
PC. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information. Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another.
Page 22: Regulatory Statements
Regulatory statements This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.
Page 23 The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 24 Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery. Using this equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).
Page 25 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 26 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Trademarks Portégé is a registered trademark and SmartMedia is a trademark, of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 28 Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners. All other brand and product names are trademarks or registered trademarks of their respective companies.
Page 29: Table Of Contents
Precautions... 44 Important information on your computer’s Setting up your computer ... 47 Setting up your software... 48 Registering your computer with Toshiba ... 49 Adding external devices ... 50 Connecting the AC adapter... 51 Using the main battery... 54...
Page 30 Connecting other external devices ... 79 Using the TouchPad ... 80 Disabling or enabling the TouchPad... 81 Using the Toshiba Assist button... 82 Customizing your computer’s settings... 83 Powering off the computer ... 83 Closing the display panel ... 84 Different ways to turn the computer on and off 85 Caring for your computer...
Page 31 Character keys ... 89 Making your keyboard emulate a full-size keyboard ... 90 Ctrl, Fn and Alt keys ... 90 Function keys... 91 ® Windows special keys ... 91 Overlay keys... 92 Saving your work ... 93 Using a file extension... 94 Printing your work ...
Page 32 Contents Chapter 3: Mobile Computing ... 114 Toshiba’s energy-saver design ... 114 Running the computer on battery power ... 114 Battery Notice ... 115 Power management ... 116 Using additional batteries ... 116 Charging batteries... 117 Charging the main battery... 117 Charging the RTC battery...
Page 33 Connecting the optional external USB diskette drive... 135 Using an external keyboard... 136 Connecting a keyboard ... 137 Using an external monitor... 137 Connecting the monitor ... 137 Connecting a mouse or a printer... 138 Using PC Cards... 138 Hot swapping PC Cards ... 139 Inserting a PC Card ...
Page 34 Contents Chapter 6: Toshiba Utilities ... 158 Fn-esse Starting Fn-esse... 159 Assigning a key to a program or document ... 160 Viewing existing key assignments... 162 Changing or removing existing key Hotkey utility ... 163 Toshiba Mobile Extension ... 164 TOSHIBA Assist ...
Page 35 Deleting the hard disk drive master and user Fingerprint recognition utility ... 187 Enrolling in OmniPass... 188 Replacing your passwords... 194 Remembering passwords ... 195 Authentication settings ... 197 Password management ... 198 OmniPass user identities ... 199 Identities and password management ... 202 Care and maintenance of your fingerprint Fingerprint sensor limitations ...
Page 36 Data and system configuration backup in If you need further assistance... 246 Before you contact Toshiba... 246 Contacting Toshiba ... 247 Other Toshiba Internet Web sites ... 248 Toshiba’s worldwide offices ... 248 Appendix A: Hot Keys ... 250 Volume Mute... 250 Password security ...
Page 37 Australia... 258 Europe ... 258 Appendix C: Using ConfigFree™ with your Toshiba Computer ... 259 Getting Started... 260 Starting ConfigFree ... 260 ConfigFree Utilities... 262 Connectivity Doctor ... 262 Search for Wireless Devices ... 265 Profile Settings ... 270 ConfigFree SUMMIT... 274 Quick Connect...
Page 38: Introduction
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your access to information can accompany you wherever you go. You will find that the Microsoft operating system is already installed on your computer. It offers exciting features and easy Internet access.
Page 39: This Guide
Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, and system/ component/options availability are all subject to change without notice.
Page 40 Introduction Safety icons the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Page 41: Other Icons Used
Your computer comes with the following documentation: An electronic version of the user’s guide. It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com. Introduction Other documentation...
Page 42: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 206. “If...
Page 43: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 44: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 45 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 46 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.
Page 47: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 48: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account during the initial setup of your computer, you must connect the built-in modem to a telephone line. See “Connecting the modem” on page Setting up your software NOTE The names of windows displayed, and the order in which...
Page 49: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 50: Adding External Devices
Getting Started Adding external devices Adding external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page After starting your computer for the first time you may want Add more memory (see...
Page 51: Connecting The Ac Adapter
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 52 Getting Started Connecting the AC adapter AC adapter Sample power cord/cable and AC adapter To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 53 Connecting the AC adapter to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows blue. Never tamper with the power cable or plug; never splice or alter a power cable; never bend or twist a power cable; never place heavy objects on a power cable;...
Page 54: Using The Main Battery
Getting Started Using the main battery Glows blue when the main battery is fully charged Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet Flashes amber means the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter.
Page 55: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time NOTE The first time you use your computer, a utility called OmniPass runs automatically. When you see the OmniPass welcome screen, DO NOT click Enroll. Instead, click Cancel to exit OmniPass.
Page 56: Opening The Display Panel
Getting Started Using the computer for the first time Opening the display panel Lift the display panel to open it Opening the display panel To avoid damaging the display panel do not force it beyond the point where it moves easily. Never lift or move the computer using the display panel.
Page 57: Turning On The Power
specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide. Below are examples of some of the many possible icons used on your computer: Sample system icons Turning on the power...
Page 58: Adding Memory (Optional)
For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page “Setting up your...
Page 59: Installing A Memory Module
Installing a memory module Additional memory modules can be installed in the memory module slot on the base of the computer. You will need a standard Phillips No. 0 screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot.
Page 60 Getting Started Adding memory (optional) Sample base of the computer Using a standard Phillips No. 0 screwdriver, loosen the screw that secures the memory slot cover. Sample loosening the memory slot cover screw Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 61 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Page 62 Getting Started Adding memory (optional) Hold the memory module by its edges so that the gold connector bar faces the slot, at a slight angle to the socket. clip Sample inserting the memory module into the socket Check that the module is inserted completely into the socket and lined up squarely with the socket clips.
Page 63 clip Sample pressing down on the memory module connector until the clips snap into place Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. The clips on either side of the memory module snap into place when the memory module is properly inserted.
Page 64: Removing A Memory Module
Getting Started Removing a memory module If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described Removing a memory module If you need to remove a memory module: Complete steps page 59 module slot cover.
Page 65 Removing the memory module Replace the memory module slot cover and tighten the screw. Turn the computer over and restart it. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change.
Page 66: Hard Disk Drive (Hdd) Recovery Utilities
Getting Started Hard Disk Drive (HDD) Recovery Utilities Hard Disk Drive (HDD) Recovery Utilities HDD Recovery is available for the Portégé R200 only. NOTE Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities.
Page 67: Creating Recovery Cds/Dvds
Recovery discs. The external optical media drive must be purchased separately. You can purchase an optical media drive from Toshiba’s Web site at accessories.toshiba.com. The system will prompt you to insert the appropriate number NOTE of CDs or DVDs to copy the HDD Recovery Utilities.
Page 68: Hard Disk Drive Recovery Using The Recovery Partition
Getting Started Hard Disk Drive (HDD) Recovery Utilities Sample Recovery Disc Creator screen Select the items you want to copy by clicking the checkbox next to the item’s Name – recovery files, applications (original bundled drivers and applications), or both the recovery files and applications. Click Burn.
Page 69 Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. Sample TOSHIBA HDD Recovery Utility screen...
Page 70 To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 71: Hard Disk Drive Recovery Using The Recovery Media
Insert the first recovery CD or DVD into your optional external CD/DVD drive. Power on the computer while holding F12. Select the CD/DVD drive icon and press Enter. The TOSHIBA HDD Recovery Utility screen displays. Getting Started “Creating Recovery CDs/DVDs” on...
Page 72 Getting Started Hard Disk Drive (HDD) Recovery Utilities Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard disk drive and your information will be lost.
Page 73: Recovery Partition
To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 74: Deleting The Hard Disk Recovery Utility
Hard Disk Drive (HDD) Recovery Utilities To recover your C: drive without the recovery partition: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all data will be lost during the recovery process.
Page 75: Installing Drivers And Applications
(for example, E: drive) for the extra space and formats the drive. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.
Page 76: Connecting A Mouse
Getting Started Connecting a mouse clicking Start, All Programs, then Hard Disk Recovery Utilities. Click Next. Click the item(s) you want to install. Click Install. Follow the on-screen prompts to complete the installation process. Connecting a mouse You may want to use a USB-compatible mouse instead of the TouchPad, the computer’s built-in pointing device.
Page 77 To make the connection, you need a suitable USB cable, which may come with your printer. If a USB cable was not included with your printer, you can purchase one from a computer or electronics store. TECHNICAL NOTE: Some printers require a specific installation process.
Page 78: Connecting The Modem
Getting Started Connecting the modem Sample Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting the modem Your computer comes with an integrated modem. Before you can communicate using the modem, you need to connect it to a standard voice-grade telephone line. Locate the modem port on the back of your computer.
Page 79: Connecting Other External Devices
Connect the other end of the telephone cable to the RJ11 wall jack of a standard voice-grade telephone line. Connecting to a wall jack The modem is designed for use with a standard analog telephone line. Never connect the modem to a digital telephone line.
Page 80: Using The Touchpad
Getting Started Using the TouchPad Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: To move the cursor to the top of the page, push your...
Page 81: Disabling Or Enabling The Touchpad
left one and corresponds to the left mouse button. To double- click, press the primary button twice in rapid succession. The function of the secondary button depends on the program you are using. It usually corresponds to the right mouse button.
Page 82: Using The Toshiba Assist Button
Using the Toshiba Assist button Using the Toshiba Assist button The Toshiba Assist button, located to the left of the keyboard, activates the Toshiba Assist. This gives you quick access to some common functions. You can change the function of this button so that it performs other operations if you desire.
Page 83: Customizing Your Computer's Settings
With the computer off, it may take up to six hours to charge the main battery. Powering off the computer “Conserving battery power” on “Toshiba Utilities” on page Getting Started 158.
Page 84: Closing The Display Panel
If you close the display panel while the computer is still on, and if you have an action feature set, the computer will perform that action (Nothing, Standby, Hibernate). For more information, see “Powering off the computer” on “TOSHIBA Power Saver” on page ® XP Professional 169. ®...
Page 85: Different Ways To Turn The Computer On And Off
Different ways to turn the computer on and off Pressing the power button is not the only way to turn on and off the computer. Alternatives include: Using Hot Key combinations Opening and closing the display panel For more information, see “Using Standby”...
Page 86: Moving The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Sample computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 87: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists computing tips and provides important information about the system’s basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 88 Learning the Basics Computing tips Back up your files to discs (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 89: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just passing over an area of the page.
Page 90: Making Your Keyboard Emulate A Full-Size Keyboard
Learning the Basics Using the keyboard Making your keyboard emulate a full-size keyboard Although your computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two editing keys; cursor positioning keys; and a numeric keypad. Pressing the of the specially marked keys allows you to emulate a full-size keyboard.
Page 91: Function Keys
Function keys Sample function keys The function keys (not to be confused with the 12 keys at the top of the keyboard. They are called function keys because they run programmed functions determined by the application you are using. For more information, see your program documentation.
Page 92: Overlay Keys
Learning the Basics Using the keyboard Overlay keys Sample keyboard overlay keys The keys with numbers and symbols on them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10- key keypad on a full-size keyboard.
Page 93: Saving Your Work
To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. Always save your data even when you are using Standby mode.
Page 94: Using A File Extension
Learning the Basics Saving your work Sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 95: Printing Your Work
with a .doc extension. Any file name with an extension of “.doc” is assumed to be a Microsoft Word file. Creating your own extension is usually unwise, since the program is unlikely to recognize a strange extension and may refuse to handle your file correctly.
Page 96: Backing Up Your Files
Learning the Basics Backing up your files Sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your files Back up all the files you create in case something happens to your computer.
Page 97: Restoring Your Work
Double-click the folder that contains the file, then click the file you want to copy. TECHNICAL NOTE: You can use the more than one file. To select multiple consecutive files, hold down the files within that range will be highlighted). To select non- consecutive files, hold down the individual files you want to select.
Page 98: Connecting An External Dvd-Rom/Multi-Function Drive
An external DVD-ROM/CD-RW drive is included with the Portégé R205 only. For the Portégé R200, you can purchase an optional external optical media drive from Toshiba’s Web site at accessories.toshiba.com. Sample external DVD-ROM/multi-function drive To connect an external USB DVD-ROM or multi-function drive, connect the cable to one of the USB ports.
Page 99 Sample Audio CD window The Windows Media Sample Windows Media Player screen The Windows Media an ordinary compact disc player: To play the CD or to pause, click the Play/Pause button on the CD Player control panel. Learning the Basics Playing audio ®...
Page 100: Playing Dvds
If you are using an optional external DVD-ROM or multi- function drive, you can watch DVD movies using the InterVideo WinDVD™ application. To install the WinDVD application, use the Toshiba Application Installer on the Windows desktop. To install the WinDVD application: Double-click the Toshiba Application Installer icon on your computer’s desktop.
Page 101: Powering Down The Computer
For optimum DVD performance, it is recommended that you NOTE play DVDs while running the computer on AC power. In addition, your computer’s Power Saver utility can be used to select a power level setting for DVD playback. Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work.
Page 102: Turn Off Or Shut Down Command
Learning the Basics Powering down the computer TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 103: Hibernation Command
Hibernation command The Hibernation command powers off the computer, but it first saves the current state of the computer to the hard disk. Since Hibernation does not require power to maintain the saved information, the system settings are retained indefinitely. Restoring information from the hard disk takes longer than restoring it from memory.
Page 104: Using Turn Off Or Shut Down
Learning the Basics Using Turn Off or Shut down When starting up again, this choice uses less time and battery power than either Turn Off, Shut down or Hibernation. On restarting, the computer returns to the state in which you left it, and opens all the programs and files you were using.
Page 105: Turning Off More Quickly
Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab. Learning the Basics Using Turn Off or Shut down ®...
Page 106: Starting Again After Turn Off Or Shut Down
Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, press and release the power...
Page 107: Using Hibernation
The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab. Sample TOSHIBA Power Saver Properties window Select the options you want from the drop-down lists.
Page 108: Going Into Hibernation Mode
Set this option to Shutdown if you want the computer to turn off when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Going into Hibernation mode If you are not connected to a Windows...
Page 109: Going Into Hibernation Mode More Quickly
The computer can be connected to a Windows NOTE (domain server) using Windows Click Start, then Shut Down. The Shut Down window appears. Select Hibernate from the drop-down list of options. Click OK. The computer saves the state of the system, including all open programs and files, to the hard disk, and then powers down completely.
Page 110: Using Standby
Learning the Basics Using Standby Using Standby If you are not connected to a Windows (domain server), power down the computer using the Standby command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window with Stand By option Click Stand By.
Page 111: Going Into Standby Mode More Quickly
Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab. Learning the Basics Using Standby...
Page 112 Learning the Basics Using Standby Sample Full Power Properties window Select Standby for the options you want. When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button.
Page 113: Starting Again From Standby
Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Standby Use these instructions to restart the computer when you enter Standby mode by closing the display panel: When using AC power, open the display panel.
Page 114: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 115: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See "Detailed Specs" for specific battery measurement test. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 116: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 117: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 118: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 119: Monitoring Main Battery Power
The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working.
Page 120 Mobile Computing Monitoring main battery power Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used.
Page 121: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Toshiba Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 122: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 123: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 124: Power Profiles
Mobile Computing Monitoring main battery power Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 125: Using A Hot Key To Set The Power Profile
Release the The pop-up window disappears. You are now in the selected mode. For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page Monitoring main battery power “TOSHIBA Power Saver” on simultaneously to display the Power Profile key.
Page 126: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack. Never expose a battery pack to abnormal shock, vibration or pressure.
Page 127: Inserting A Charged Battery
Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
Page 128: Taking Care Of Your Battery
Mobile Computing Taking care of your battery The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.
Page 129: Maximizing Battery Life
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 130 Mobile Computing Taking care of your battery Disconnect the AC adapter and turn on the computer’s power. If it does not turn on, go to step 4. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged.
Page 131: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Mobile Computing Disposing of used batteries...
Page 132: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords/cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 133: Chapter 4: Expansion Options
To order additional devices and accessories, see the accessories information provided with your computer, or visit accessories.toshiba.com. Using your computer at the office By connecting an external full-size keyboard, an external monitor, a mouse and a printer, you can work with your computer as if it were a standard office model.
Page 134: Using An Expansion Device
For more information, see the accessories information package that comes with the device or visit accessories.toshiba.com. Optional Slim Port Replicator The optional Slim Port Replicator enhances your mobility because it provides ports that enable you to connect to many expansion devices.
Page 135: Using The Optional Slim Port Replicator
Use the Universal Serial Bus (USB) ports to connect the optional external USB DVD/multi-function drive, diskette drive, or other USB peripherals. You can connect the AC adapter to the DC-IN jack on the optional Slim Port Replicator. Using the optional Slim Port Replicator The optional Slim Port Replicator connects to the expansion port on the bottom of the computer.
Page 136: Using An External Keyboard
Expansion Options Using an external keyboard Diskette-in-use light Optional external USB diskette drive and connector cable TECHNICAL NOTE: You may attach the optional external USB diskette drive while the computer is on or off. If you attempt to access the drive when it is not attached to the computer, you will receive an error message.
Page 137: Connecting A Keyboard
Connecting a keyboard You can connect a USB keyboard while the computer is on. To connect the keyboard to the computer or the optional Slim Port Replicator, gently push the keyboard cable into the USB port. Using an external monitor If you prefer to use an external monitor, you can attach one to your computer’s RGB (monitor) port or to the RGB (monitor) port on the optional Slim Port Replicator.
Page 138: Connecting A Mouse Or A Printer
Expansion Options Connecting a mouse or a printer Using both screens simultaneously You can view information on the computer’s built-in display and an external monitor simultaneously. The size of the display image on each screen depends upon the video mode. To send information to both the built-in display panel and the external monitor: Press...
Page 139: Hot Swapping Pc Cards
using a PC Card, leave the insert in place. If you are using a PC Card, remove the insert and keep it in a safe place for future use. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later).
Page 140: Hot Swapping Precautions
Expansion Options Using PC Cards To install a PC Card: Locate the PC Card slot on your computer. Sample inserting a PC Card into the slot Insert the PC Card in the slot. When the card is almost all the way into the slot, push firmly, but gently, to ensure a good connection with the computer.
Page 141: Removing A Pc Card
Before removing a PC Card, stop it by clicking the Safely Remove Hardware icon in the system tray. Removing a PC Card Click the Safely Remove Hardware icon in the system tray. PC Card eject button Sample PC Card eject button Press the PC Card eject button once to extend it, then press it again to remove the card.
Page 142: Inserting An Sd™ Card
Expansion Options Using a Secure Digital (SD™) card Insert the source SD card. Create a temporary folder on the hard disk drive. Copy the contents of the source SD card into the temporary folder you created in step 3. Remove the source SD card. Insert the target SD card created in step 1.
Page 143: Removing An Sd™ Card
Removing an SD™ card Click the Safely Remove Hardware icon in the system tray. Click Safely Remove SD Memory Card Drive - Drive (D:). When the message displays that it is safe to remove hardware, press the card inward to release it. The card pops out slightly.
Page 144: Chapter 5: Exploring Your Computer's Features
Chapter 5 Exploring Your Computer’s Features In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows several new features and enhancements, including: New system file protection A system restore function, allowing you to rollback the system to its previous mode An improved help center, support automation, and automatic Windows...
Page 145: Personalizing Your Desktop
Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: Taskbar—which resources to display for quick access Web content interface—what information from the Internet to always display Desktop style—how windows are displayed and how to...
Page 146: Bringing The World To Your Desktop
Exploring Your Computer’s Features Personalizing your desktop For example, you can personalize the taskbar to include Quick Launch icons, and also your favorite URL addresses or local folders and programs. DEFINITION: URL stands for Uniform Resource Locator, which is the address that defines the route to a file on the Web or any other Internet facility.
Page 147: Changing Desktop And Browsing Style
The New Desktop Item dialog box appears. To browse the Gallery for more components to add, click Visit Gallery. In order to browse, an active Internet connection must be established. To select some other Web site, type the address of the Web site you want or click Browse to locate it.
Page 148 Exploring Your Computer’s Features Personalizing your desktop Choosing a style To select desktop and browsing style options: Open the Start menu and select My Computer. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options.
Page 149: Personalizing Individual Windows
Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis. For example, using this Web integration feature you can monitor weather, game scores, stock prices, or headlines—all in the window of your choice.
Page 150: Displaying Information About Each Folder
Exploring Your Computer’s Features Personalizing your desktop The elements you can add to the top of the window are: Toolbar element Standard buttons Displays buttons for commonly used Address Bar Links Displaying a toolbar in a window Open the Start menu and select My Computer. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 151: Setting Up For Communications
In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK. Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page.
Page 152: Determining The Com Port
Exploring Your Computer’s Features Setting up for communications NOTE There are many other ways to connect to the Internet in addition to those discussed in this section. For troubleshooting information related to this topic, see “Modem problems” on page 232 problems”...
Page 153: Using The Ethernet Lan Port
The Toshiba Software Modem Properties box appears. In the device status area, the computer should indicate whether the modem is working properly. If the modem is not working properly, click Troubleshooting and follow the instructions. Click OK to close the Properties box, then the Phone and Modem options box.
Page 154: Accessing A Lan
Exploring Your Computer’s Features Setting up for communications Accessing a LAN To access a LAN: At the office, you can connect the network Ethernet cable to the RJ45 jack on your computer. Your computer may be equipped for wireless communications. If so, see the next section on Wireless LAN From home or while on the road you’ll need a dial-up connection.
Page 155: Using Audio Features
To use your wireless communication, slide the wireless on/off switch to the On position. NOTE NOTE When the Wi-Fi antenna switch is on, the wireless indicator light above the keyboard will be lit. For help with common Wi-Fi networking problems, see “Wireless networking problems”...
Page 156: Recording Sounds
Exploring Your Computer’s Features Using audio features To play back sound files through external speakers or headphones: Locate the headphone jack on the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack. To adjust the volume: For external speakers, use the volume control on the speaker in conjunction with the volume control on the...
Page 157 Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. NOTE When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 158: Chapter 6: Toshiba Utilities
These utilities are described in this chapter: Fn-esse® Hotkey utility Toshiba Mobile Extension TOSHIBA Assist Trusted Platform Module (TPM) HDD Protection TOSHIBA Button Controls TOSHIBA Power Saver TOSHIBA Hardware Setup TOSHIBA Password Utility TOSHIBA Touch and Launch TOSHIBA Zooming Utility...
Page 159: Fn-Esse
TOSHIBA SD™ Memory Boot Utility Fingerprint recognition utility ® Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files.
Page 160: Assigning A Key To A Program Or Document
Toshiba Utilities Fn-esse® Sample Fn-esse keyboard The keys are color-coded as follows: Available keys are white. Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. Unavailable keys do not appear.
Page 161 HINT: If you are making a direct key assignment, complete step 3. If you are making a popup assignment, complete step 4. To make a direct key assignment, select Direct to display the Add/Edit Command dialog box, then complete these steps: Toshiba Utilities Fn-esse® key, then...
Page 162: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse® Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information. Click OK. To make a popup assignment, select Popup to display the Application Explorer dialog box, then complete these steps: Select the desired folder.
Page 163: Changing Or Removing Existing Key Assignments
The hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba, Utilities, and then click Hotkey utility. The Hotkey window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Page 164: Toshiba Mobile Extension
Toshiba Mobile Extension Toshiba Mobile Extension To adjust the settings for the optional Slim Port Replicator, use the TOSHIBA Mobile Extension utility. To use the TOSHIBA Mobile Extension utility: Click Start, then Control Panel, then Performance and Maintenance. Click TOSHIBA Mobile Extension.
Page 165: Toshiba Assist
Sample Display Change Service tab options For more information about expansion devices, see expansion device” on page TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist.
Page 166: Optimize
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist window The TOSHIBA Assist offers four categories of features: Connect Secure Protect & Fix Optimize Optimize The features available in this category are: Power Management Mouse Hotkey assignment (for detailed information, see “Fn-esse®” on page...
Page 167: Connect
The features available in this category are: PC Diagnostic Tool HDD Protection TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the Toshiba Assist and Toshiba Presentation buttons. Those buttons are located just above the function keys at the top of the keyboard.
Page 168: Hdd Protection
HDD Protection is enabled, the HDD head is moved to a safe position to protect the HDD from damage. To access the HDD Protection feature: In the Toshiba Assist window, click the PROTECT & FIX tab, then double-click the HDD Protection icon. The TOSHIBA HDD Protection Properties window...
Page 169: Toshiba Power Saver
Click Apply, OK. TOSHIBA Power Saver The TOSHIBA Power Saver utility enhances your computer’s power management capabilities. It controls the computer’s Power Save profiles, which is a series of settings for power management. In the TOSHIBA Power Saver Properties dialog box, you can choose which profile to use, change settings for each profile, or create your own custom profiles.
Page 170 Sample TOSHIBA Power Saver Properties window You may also access the Power Saver Properties by pressing the TOSHIBA Assist button: Press the TOSHIBA Assist above the left side of the keyboard. The TOSHIBA Assist screen appears. Click Optimize and click the Power Management icon.
Page 171: Toshiba Hardware Setup
Double-click the Toshiba Hardware Settings icon. The TOSHIBA HWSetup window appears. Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window contains tabs for each hardware setup option available for your system. To access a specific hardware option, select the appropriate tab, then select the desired options.
Page 172 Toshiba Utilities TOSHIBA Hardware Setup General—Allows you to view current BIOS version or to change certain settings back to their default values Device Config—Shows the Device configuration options Display—Allows you to change various default settings for the built-in LCD display CPU—Allows you to set the “CPU Frequency Mode”...
Page 173: Toshiba Password Utility
LAN—Lets you enable or disable the Wake-on-LAN feature, and also enable or disable the built-in LAN TOSHIBA Password Utility The TOSHIBA Password Utility allows you to set a user- level password in TOSHIBA Assist or in System Setup. Press the Toshiba Assist button and click Secure.
Page 174: Toshiba Touch And Launch
Click OK to exit. If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 175 A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon's function.
Page 176 The title and functions can change when you select one of the corner icons. The corner icons can be changed to other shortcuts using the TOSHIBA Touch and Launch settings. By default the four icons displayed are: My Computer (upper left)
Page 177 The Option button allows you to define how folders will open, define visual effects and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 178: Toshiba Zooming Utility
You can set or clear the Disable TOSHIBA Touch and Launch check box in the TOSHIBA Touch and Launch Settings window in order to disable or enable this feature. You can also use the TOSHIBA Touch and Launch icon on the system tray. TOSHIBA Zooming Utility...
Page 179: Toshiba Sd™ Memory Boot Utility
TOSHIBA SD™ Memory Boot Utility In order to boot from an SD card, you must make the card SD card bootable. To do so, run the Toshiba SD Memory Boot Utility. The TOSHIBA SD Memory Boot Utility screen appears. Sample TOSHIBA SD Memory Boot Utility screen Attach a USB floppy drive to your computer, and insert a bootable floppy disk.
Page 180: Sd™ Memory Card Format
Media Adapter Slot. Sample SD Memory Card Format screen Trusted Platform Module (TPM) Your Toshiba computer includes the TPM (Trusted Platform Module) which is a security encryption device for your system's hard disk drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 181: Hard Disk Drive Passwords
Setting a hard disk drive master password lets you bypass the hard disk drive user password and access your hard disk, in case you forget the hard disk drive user password. If you choose to set a hard disk drive master password, Toshiba Utilities Hard disk drive passwords...
Page 182: Setting A Hard Disk Drive User Only Password In System Setup
YOU WILL NEVER BE ABLE TO ACCESS YOUR HARD DISK AGAIN, unless you’ve set a hard disk drive master password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
Page 183: Deleting Or Changing A Hard Disk Drive User Only Password In System Setup
. You may use any combination Enter Enter . If the two passwords do not match, an error to save the change. key and press and hold the power to move to the HDD PASSWORD section on the Toshiba Utilities...
Page 184: Setting A Hard Disk Drive Master And User Password In System Setup
Toshiba Utilities Hard disk drive passwords Press the spacebar, then type in your user password and press Enter If you want to change the password, input the new password. When System Setup prompts you to verify the password, type it again and press...
Page 185: Changing The Master And User Passwords In System Setup
Hard disk drive passwords to move to the HDD PASSWORD section on the . You may use any combination Enter Enter for both User and Master passwords. If the two to save the change. key and press and hold the power Toshiba Utilities...
Page 186: Deleting The Hard Disk Drive Master And User Passwords In The System Setup
Toshiba Utilities Hard disk drive passwords The System Setup screen appears. Press screen. Use the up and down arrow keys to select the password you wish to change. Press the spacebar, then enter the appropriate password and press If you want to change your password, input the new password.
Page 187: Fingerprint Recognition Utility
Secure storage of unlimited passwords and related information. Security through fingerprint recognition technology. Fingerprint recognition utility to move to the HDD PASSWORD section on the Not Registered Not Registered. to save the change. Toshiba Utilities twice. Enter . The user password ® passwords,...
Page 188: Enrolling In Omnipass
Toshiba Utilities Fingerprint recognition utility User-friendly Graphical User Interface (GUI) for password, user and identity management. Seamless integration with Windows, providing secure Windows logon. International language support. Getting started How OmniPass works OmniPass allows you to use a single “master” password to gain access to all of your Windows accounts, application accounts, and online accounts.
Page 189 OmniPass. To create a password, follow the instructions at the beginning of this section. The wizard displays your Windows user name and domain. Enter your Windows password. This password will become your master password. Click Next to continue. Toshiba Utilities Fingerprint recognition utility...
Page 190 Toshiba Utilities Fingerprint recognition utility Sample verify user name and password screen The Choose Finger screen appears. Select the finger you wish to enroll, then click Next. Sample Choose Finger screen...
Page 191 The screen displays a red fingerprint, indicating that the capture attempt failed. In this case, swipe your finger again. The Capture Fingerprint screen lets you try up to three times to capture your fingerprint. If you fail to capture your Toshiba Utilities Fingerprint recognition utility...
Page 192 Toshiba Utilities Fingerprint recognition utility fingerprint after three tries, click Back to return to the Choose Finger screen, then click Next and restart the capture process. The Verify Fingerprint screen appears. To verify your fingerprint, swipe your finger on the sensor. Verification is successful if the message Verification Successful appears and the fingerprint turns green.
Page 193 Sample Audio and Taskbar Settings screen The Congratulations screen appears indicating successful completion of enrollment. Click Done to exit. Sample Congratulations screen OmniPass asks if you would like to log on the new user. Click Yes to continue. Toshiba Utilities Fingerprint recognition utility...
Page 194: Replacing Your Passwords
Toshiba Utilities Fingerprint recognition utility Sample Log on New User screen Replacing your passwords OmniPass Authentication Toolbar When OmniPass is enabled, the Authentication Toolbar appears at each login for the functions that you selected in the Set Authentication Rules screen.
Page 195: Remembering Passwords
Remember Password procedure. Once this is done, all you need to do to access the resource is to pass the authentication in effect for that resource; you no longer need to remember and enter the login information. This is of great benefit when Toshiba Utilities Fingerprint recognition utility...
Page 196 Toshiba Utilities Fingerprint recognition utility OmniPass is used to remember the login credentials for many different resources. To use the Remember Password procedure to cause OmniPass to remember the login credentials for a resource: Bring up the application, or direct your web browser to access the Web site.
Page 197: Authentication Settings
Automatically enter this password protected site when it is activated. Do not prompt for authentication. This option is less secure than the previous one. If this is selected, each time you navigate to this site, Toshiba Utilities Fingerprint recognition utility “Authentication “Sample Friendly Name screen” on...
Page 198: Password Management
Toshiba Utilities Fingerprint recognition utility OmniPass logs you into the site without prompting for authentication. NOTE This setting makes accessing a site convenient—whenever you go to the site, you bypass all authentication procedures and gain instant access to the site. However, while you are...
Page 199: Omnipass User Identities
To create and manage identities: Double-click the OmniPass key in the system tray. Click Vault Management. OmniPass will prompt you to authenticate. Once you gain access to Vault Management, click Manage Identities under Vault Settings (as shown Toshiba Utilities Fingerprint recognition utility...
Page 200 Toshiba Utilities Fingerprint recognition utility above). Only the identities of the currently logged in OmniPass user can be managed. To add a new identity: Click New Identity or double-click <Click here to add a new identity>. Name the new identity and click OK.
Page 201 Sample Choose Identity During Login Switching user identity To switch identities at any time: Right-click the OmniPass system tray icon. Click Switch User Identity in the menu as shown below. Sample Switch User Identity screen Toshiba Utilities Fingerprint recognition utility...
Page 202: Identities And Password Management
Toshiba Utilities Fingerprint recognition utility The Switch Identity dialog will appear as shown below. Select the desired identity, then click OK. Sample Select Identity screen Identities and password management The Manage Passwords interface (see Passwords interface screen” on page down selection box labeled Identity. This field lets you choose the identity whose passwords you wish to manage.
Page 203: Care And Maintenance Of Your Fingerprint Sensor
Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. Soaked or swollen finger (e.g. after taking bath) Injured finger Toshiba Utilities Fingerprint recognition utility...
Page 204: Fingerprint Sensor Limitations
Toshiba Utilities Fingerprint recognition utility Wet finger Soiled or oily finger Extremely dry skin condition on finger Observe the following to improve the fingerprint recognition success rate. Enroll two or more fingers. Enroll additional fingers if recognition failure occurs often using enrolled fingers.
Page 205 Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 206: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 207 The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 208: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard.
Page 209 Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text, and try typing again.
Page 210: The Windows ® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 211: The Windows ® Operating System Is Not Working
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 212: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 213: Resolving A Hardware Conflict
The device most recently connected to the system is the one most likely to be causing a hardware conflict. If Something Goes Wrong Resolving a hardware conflict pcsupport.toshiba.com Help and Support to troubleshoot the problem...
Page 214: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 215: Fixing A Problem With Device Manager
If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer.
Page 216 If Something Goes Wrong Resolving a hardware conflict Disabling a device Open the Start menu, and click Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 217: Memory Problems
The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: The General tab, which provides basic information about the device. The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 218: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 219 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. If Something Goes Wrong...
Page 220: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging batteries” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 221: Display Problems
Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press any key, type the password and press no password is registered, press any key.
Page 222 If Something Goes Wrong Resolving a hardware conflict The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box.
Page 223: Disk Drive Problems
The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 224 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 225 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator. Some programs run correctly but others do not. This is probably a configuration problem.
Page 226: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer.
Page 227: Sound System Problems
Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 228 If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict” on page Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 229 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 230 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the PC Card icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card.
Page 231: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 232: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba web site at 152. pcsupport.toshiba.com...
Page 233: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 234 If Something Goes Wrong Resolving a hardware conflict Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 235 Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). Click Start, then click Run... Enter Cmd and press Enter. Enter PING 192.168.1.1 at the command prompt, and press Enter. If “Request Timed Out”...
Page 236: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 237 “Checking device properties” on page 216 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 238 If Something Goes Wrong DVD operating problems Click the Settings tab. Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 239: Develop Good Computing Habits
Click and hold the up arrow by the list or move the slide to the top. Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 240: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits computer. Your ability to solve problems will improve as you learn about how the computer and its software work together. Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase.
Page 241 Click Create a restore point, and then click Next. In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. Windows creates the Restore Point and automatically stamps it with the current date and time.
Page 242 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 243 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: E-mail files and settings—for Outlook, Outlook Express, or other e-mail apps.
Page 244 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 245 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser).
Page 246: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 247: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 248: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited...
Page 249 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 250: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 251: Password Security
Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 252: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 253: Power Usage Mode
This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, Standby mode This hot key places the computer into Standby mode.
Page 254: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. Sample Hibernation confirmation box If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 255: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 256: Disabling Or Enabling Wireless Devices
Hot Keys Disabling or enabling wireless devices Disabling or enabling wireless devices This hot key enables and disables the optional wireless devices installed in your computer. The wireless modes are: Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad”...
Page 257: Keyboard Hot Keys
This hot key turns the Zooming utility to zoom- out. For more information, see ing Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see Utility” on page Hot Keys Keyboard hot keys “TOSHIBA Zoom- 178. “TOSHIBA Zooming 178.
Page 258: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 259: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 260: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon click the desired utility.
Page 261 Using ConfigFree™ with your Toshiba Computer If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 262: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 263 Using ConfigFree™ with your Toshiba Computer Location of wireless communication switch (identified with a yellow arrow) Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 264 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 265: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 266 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 267 Using ConfigFree™ with your Toshiba Computer Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection NOTE list, the system displays the Connection screen rather than the Wireless settings screen.
Page 268 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 269 Using ConfigFree™ with your Toshiba Computer Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 270: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 271 Using ConfigFree™ with your Toshiba Computer office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: Internet settings —...
Page 272 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click the more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings. (These options are unavailable if wireless devices have been disabled.)
Page 273 Using ConfigFree™ with your Toshiba Computer Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 274: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 275 Using ConfigFree™ with your Toshiba Computer Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. To share a file with one user, drag and drop the file on the user’s icon.
Page 276 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired.
Page 277 Using ConfigFree™ with your Toshiba Computer Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 278: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 279 Using ConfigFree™ with your Toshiba Computer To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 280 The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: If the Toshiba Wireless Projector utility is closed. If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection).
Page 281: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 282 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 283: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewritable memory...
Page 284 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 285 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 286 Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
Page 287 bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
Page 288 Glossary compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as each other. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Page 289 disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk —...
Page 290 Glossary DVD — An individual digital versatile (or video) disc. See also DVD- ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM.
Page 291 format — (verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so that the operating system can write information to the disk or read information from it. frontside bus — The primary pathway (bus) between the CPU and the computer’s main memory.
Page 292 Glossary Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 293 LAN (local area network) — A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels.
Page 294 Glossary motherboard — The main circuit board in the computer. It contains the processor, memory, and other primary components. MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. multi-function drive —...
Page 295 PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU.
Page 296 Glossary removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
Page 297 Suspend — A feature of some Windows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. system disk — A diskette that contains the operating system files needed to start the computer.
Page 298: Index
53 not charging 218 power usage hot key 125 power usage mode 253 real-time clock (RTC) 116 removing 126 BIOS see Toshiba Hardware Setup button power 67 buttons CD Player 99 control 80 primary control 80 secondary control 80...
Page 299 145 Device Manager 215 checking properties 216 disabling a device 216 digital audio .WAV files 156 disable/enable TOSHIBA Touch and Launch Disk Defragmenter 224 disk drive corrupted/damaged data files 225 missing files/trouble accessing a disk 223 running slow 224...
Page 300 error messages device driver conflict 213 general hardware problem 213 non-system disk or disk error problem with display settings/ current settings not working with hardware 222 program has performed an illegal operation 207 warning resume failure 209 Error-checking 224 Ethernet LAN Port disabling 153 using 153 expansion capability 134...
Page 301 Index hot keys 251 hot swapping 139 precautions 140 Hotkey utility 163 Industry Canada requirement 4 Internet bookmarked site not found 212 slow connection 212 URL address not found 212 IRQ (Interrupt Request) 214 jacks headphone 155 speaker 155 keyboard character keys 89 connecting external USB 137 Ctrl, Fn and Alt keys 90...
Page 302 225 changing display properties 222 checking device properties 216 computer hangs when PC Card computer will not power up 208 contacting Toshiba 246 corrupted/damaged data files 225 Device Manager 215 disabling a device 216 disk drive is slow 224...
Page 303 143 using 141 security setting hard disk drive passwords setting up computer 47 printer 77 TOSHIBA Touch and Launch settings TOSHIBA Touch and Launch Shut down using 104 Shut down command 102 simultaneous screens 138 Slim Port Replicator 134...
Page 304 49 worldwide offices 248 Toshiba Accessories information 41 TOSHIBA Button Controls 167 TOSHIBA Console 165 Toshiba Hardware Setup 171 TOSHIBA Touch and Launch 174 disable/enable 178 TouchPad using 80 traveling tips 132 troubleshooting DVD player general problems 236...

This manual is also suitable for:

R200-s214 R200-s2062 R200-s2031 R205-s2062 R205-s209 R200-s234 ... Show all

Toshiba R200-S2032 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Expansion Options

Chapter 5: Exploring Your Computer's Features

Chapter 6: Toshiba Utilities

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba R200-S2032

Summary of Contents for Toshiba R200-S2032